Impact of initial moisture content levels,freezing rate and instant controlled pressure drop treatment (DIC) on dehydrofreezing process and quality attributes of quince fruits

Dehydrofreezing process involves water partial removal before freezing. This treatment has been proposed in order to reduce the negative impacts of conventional or even accelerated freezing, especially on the textural quality of high water content fruits and vegetables. Indeed, in such cases, freezing and thawing processes result in severe damage of the integrity of product’s cell structure due to the formation of ice crystals. For this purpose, quince fruits (7?g H₂O/g db) were subjected to convective air drying of 40?°C and 3m/s to reach different water content levels of 2, 1, and 0.3?g H₂O/g db. Freezing profiles obtained at various freezing rates (V₁, V₂, and V₃) for different water contents allowed the main freezing characteristics such as the Initial Freezing Temperature (IFT), the Practical Freezing time (PFt), and the Specific Freezing time (SFt) to be assessed. The impact of freezing rate was important on PFt and SFt, and more pronounced for high water contents (W between 7 and 2?g H₂O/g db (dry basis)). Furthermore, IFT decreased sharply when initial sample water content decreased. Indeed, it started at ?0.8?°C for W?=?7g H₂O/g db, while it reached a value of ?8.2?°C for samples of W?=?1g H₂O/g db. Since convective air drying normally triggers shrinkage which causes a detrimental deformation of fruit structures, instant controlled pressure drop (DIC) treatment was used to improve the texture and enhance the whole dehydrofreezing performance and the final frozen-thawed product quality. Moreover, DIC implied a slight increase of PFt compared to untreated ones. On the other hand, quality attributes were estimated through the assessment of thawed water exudate (TWE g H₂O/100?g db), color and texture (maximum puncture force as index of firmness): freezing rate and water content had great impacts on TWE. Hence, the lower the water content, the weaker the TWE. Furthermore, the TWE of the pre-dried quince (0.3?g H₂O/g db) had higher value for DIC-textured samples than for the un-treated ones. Indeed, DIC-texturing leads to a well-controlled structure expansion of the cell wall. These textural changes resulted in more lixiviation of residual water. Consequently, water becomes more available, hence more releasable after thawing. Finally, the partial removal of water by air drying before freezing remarkably reduced the negative impact of freezing/thawing processes on final quince color. Decisively, the firmness of quince fruit increased with the decrease of water content level.

Abbreviations: DMC: Dry Matter Concentration (%); DIC: Instant controlled pressure drop; W: Water content dry basis (g H₂O/g db); IFT: Initial Freezing Temperature (°C); PFt: Practical Freezing time (min); SFt: Specific Freezing time (min); TWE: Thawed Water Exudate (g H₂O/100?g db); L, a, and b: Color coordinates; (L): The degrees of lightness; (a) and (–a): The redness (a) or greenness (?a), respectively; (b) and (?b): The yellowness (b) or blueness (?b), respectively; ΔE*_ab: Total color difference; L₀, a₀, and b₀: Color coordinates of fresh or dried quince samples; SD: Standard Deviation; ANOVA: Analysis of variances; LSD: Least Significant Differences; cp: Specific Heat of the product depending on composition (dry material and water content)(KJ/kg K); cp_d: Specific Heat of the dry material (KJ/kg K); cp_W: Specific Heat of water (KJ/kg K); V₁: Freezing rate without insulation; V₂: Freezing rate with a food stretch film insulation with thickness e2?=?3?mm and thermal conductivity λ₂?=?0.17 W/m K; V₃: Freezing rate with a versatile flexible insulation (Armacell) with thickness e3?=?13mm and weak thermal conductivity λ₃?=?0.036 W/m K; v_d: Volume of dry material of quince sample (mm³); v_H2O: Volume of quince sample water (mm³); v_t: Total volume of quince sample (mm³); e₀: Quince sample thickness (mm); e₂: Insulation thickness in the case V2; = 3?mm; ; e₃: Insulation thickness in the case V3; = 13?mm; ; λ₀: Quince sample conductivity (W/m K); λ₂: Insulation conductivity in the case V2;?=?0.17 W/m K; ; λ₃: Insulation conductivity in the case V3;?=?0.036 W/m K; λ_d: Conductivity of quince sample dry material (W/m K); λ_H2O: Conductivity of water (W/m K); λ_equiv: Equivalent conductivity of quince sample versus water content (W/m K); m_i and m_f: Weights of the frozen and thawed samples, respectively     

Power-delay-product optimal repeater design for horizontal and vertical multilayer graphene nanoribbon interconnects

Journal of Computational Electronics - Power-delay-product optimal design of repeater size and number design for both horizontal and vertical multilayer graphene nanoribbon (MLGNR) interconnects is...     

Organophosphorus pesticide residues in Greek virgin olive oil: levels, dietary intake and risk assessment

The occurrence of organophosphorus pesticide (OPs) and their metabolite residues was investigated in 167 samples of Greek virgin olive oil during a 2-year (2004-2005) sampling campaign. A total of 30.5% of samples contained detectable residues, although only one sample contained dimethoate residues above the maximum residue limit. Among the seven detected OPs, fenthion and fenthion sulfoxide residues were detected in 10.8 and 14.4% of the samples, respectively, at levels of 0.003-0.61 mg kg(-1). Dimethoate was detected in 10.2% of the samples at 0.003-0.057 mg kg(-1). The acute dietary risk assessment was undertaken by determining the national estimated short-term intake (NESTI); for chronic dietary risk assessment, the national theoretical maximum daily intake (NTMDI) and national estimated daily intake (NEDI) were calculated. The estimated intakes (NESTI and NEDI) of each pesticide were <7 and <0.86% of the corresponding acute reference doses (ARfDs) and acceptable daily intakes (ADIs), respectively. A cumulative risk assessment was performed using the hazard index (HI) and toxicity equivalence factor (TEF), taking into account that OPs share the same toxicological mechanism. The determined HI and TEF values were found to represent only a small portion of the respective ADIs or ARfDs. These results indicate that there is neither acute nor chronic risk for the Greek population through olive oil consumption.     

Hygrothermal forced vibration of a viscoelastic laminated plate with magnetostrictive actuators resting on viscoelastic foundations

International Journal of Mechanics and Materials in Design - The article presents a vibration analysis of a laminated composite sandwich plate containing viscoelastic layers in the core and faces...     

Development of a simulation model for a three-dimensional wind velocity field using Ténès Algeria as a case study

A mathematical simulation model was developed that can determine the three-dimensional wind velocity field over a complex terrain. The Ténès area in the Valley of Cheliff in Algeria was used as a case study. This region is exposed to south-west circulation that makes it favorable to the use of wind energy. Knowledge of wind fields is crucial for predicting the dispersion of pollutants, for forecasting meteorological weather, for fire spread prediction and in the design and implementation of wind turbines. By means of a mass consistent model, an in-house program was developed to calculate the three-dimensional wind velocity field in the study region. The model was supported by a numerical box in which flow through is allowed for in the upper and lateral boundaries. The bottom boundary through which no flow through occurs was determined by the topographic relief at the surface. From measured wind velocities, observed values were calculated by interpolation-extrapolation. Using an optimization method, the adjusted velocities were obtained from constraints, observed velocities and the continuity equation. The model was verified with wind point data, the relative error did not exceed 6%.     

Multi-level cross-layer protocol for end-to-end delay provisioning in wireless multimedia sensor networks

Frontiers of Information Technology & Electronic Engineering - Rapid developments in information and communication technology in recent years have posed a significant challenge in wireless...     

Novel NGR anchored pullulan micelles for controlled and targeted delivery of doxorubicin to HeLa cancerous cells

Doxorubicin (DOX) is used to treat different kinds of cancers, including cervix carcinoma. However, it has various side effects such as cardiotoxicity. Nano-sized controlled releasing carriers such as polymeric micelles are of interesting approaches to overcome these side effects of doxorubicin in cancer chemotherapy. Regarding the up-regulation of CD13/APN receptors on the cervix carcinoma cells, which can bind to peptide sequences specially NGR (asparagine–glycine–arginine) with high affinity, peptide sequence (NGR) targeted micelles would lead to effective treatment of this carcinoma. In this study, the NGR peptide sequence was synthesized using the solution-phase strategy from asparagine, glycine, and arginine residues. The pullulan–retinoic acid conjugate and pullulan–retinoic acid–NGR conjugate were prepared by the amide and ester bond formation between the hydroxyl groups of pullulan and carboxylic acid groups of retinoic acid and peptide sequence. Pullulan–retinoic acid–NGR micelles were prepared by the direct dissolution method. The optimized micelles, according to their particle size (124.5 nm), zeta potential (? 3.65 mV), entrapment efficiency (85%), and release of DOX (70%, within 72 h) were assessed for their cytotoxicity on HeLa cells using MTT assay. NGR-targeted pullulan/retinoic acid micelles had higher cytotoxicity than the free DOX in cell culture studies on the HeLa cell line, and this can be a promising result in the treatment of cervix carcinoma.     

A new manufacturable filter design approach for spectral reflectance estimation

Selection of the best possible filter set among a set of available filters is the obvious method of increasing dimension of camera signals for spectral reflectance reconstruction. There are also methods that are focusing on the filter design regardless of noticing to the constructability of the designed filters. This study shows that direct optimization of physical variables of filter manufacturing technique is more reliable than indirect approach of designing and then physical manufacturing of the designed filters. Direct optimization of the transmission‐controlling primaries in filter manufacturing process would guarantee having the designed filters in reality. Combination of some solvent dyes was used as the spectral transmission matching system for filter manufacturing. As a conventional technique, filters were designed and best possible dye concentrations that match the desired filters were calculated. As an alternative approach, filters were also designed using direct optimization of dyes concentrations. The results showed that direct optimization of dye concentrations exhibits better performance in comparison with the conventional technique. © 2016 Wiley Periodicals, Inc. Col Res Appl, 42, 316–326, 2017     

Processing and 3D printing of SiCN polymer-derived ceramics

Preceramic polymer resins are attractive for the 3D printing of net-shaped ceramic components. Recently various processes have been demonstrated for 3D printing of polymer-derived ceramics (PDCs). Ultimately in these processes, the process outcomes strongly depend on the process parameters. In particular, for PDCs the ceramic density, and ceramic yield are affected by the catalyst concentration and cross-linking duration. Here, we use thermal analysis and FTIR to quantify the interrelation of the process parameters on the process outcome for polysilazanes and demonstrate 3D printing of PDC components based on the best-identified process parameters. The results of this work can be used as guidelines for future additive manufacturing of PDCs.