A case of severe Becker muscular dystrophy diagnosed in early childhood--correlation between clinical severity and dystrophin testing

Cutaneous lesions caused by M. ulcerans were shown to bear only a superficial resemblance to those produced by certain spider species. M. ulcerans was not found in either the venoms or the midguts of several Australian spiders, and deliberate contamination by inoculation of the fangs and digestive system of the wolf spider, Lycosa godeffroyi, did not result in permanent colonization. M. ulcerans was successfully introduced into the skin of mice through a small trauma site similar to that caused by a spider bite. However, because M. ulcerans was shown to survive on exposed surfaces for only a short period, a successful inoculation is likely only if the skin is contaminated with this organism after, or at the same time as, the skin suffers damage. The claim by other workers that M. ulcerans produces cutaneous ulcers by release of an exotoxin could not be confirmed. The authors conclude that M. ulcerans is not involved in most cases of necrotic arachnidism and hence there is no justification for prescribing anti-mycobacterial antibiotics to resolve alleged spider bite lesions unless the presence of M. ulcerans has been demonstrated by appropriate laboratory tests.     

Overexpression and purification of Aspergillus aculeatus beta-mannosidase and analysis of the integrated gene in Aspergillus oryzae

An expression plasmid for the manB gene encoding Aspergillus aculeatus beta-d-mannosidase (MANB) was constructed by using an expression vector carrying an improved promoter. After transformation of A. oryzae by the plasmid, several transformants formed colonies emitting fluorescence on a plate containing 4-methylumbelliferyl beta-d-mannopyranoside (MU-Man) under UV-irradiation. The transformant that displayed the strongest fluorescence, named A. oryzae BMN1, produced about 270 mg MANB/l in liquid culture. Recombinant MANB overproduced in BMN1 was purified by two steps of column chromatography to a single protein band on SDS-polyacrylamide gel electrophoresis and had a molecular weight of 130,000. Analyses by Southern blotting and genomic PCR demonstrated that a single copy of the plasmid was integrated into the chromosome by recombination at the niaD locus.     

Study of drive system for linear induction motor using magnetic energy recovery switch

This paper proposes a power supply suitable for driving linear induction motors. The power supply consists of a voltage source inverter (VSI) and a magnetic energy recovery switch (MERS). Circuit configuration and operation principles of the power supply are described. Power factor correction by MERS can increase the output power. Technical advantages of using MERS compared with increasing the rated voltage of VSI are discussed. Some experiments with a linear induction motor were conducted. The results confirm that MERS can reduce the capacity of the VSI or increase the output with the same VSI capacity. The number of devices and magnitude of losses are evaluated on a large‐scale drive system. A half‐bridge type of MERS is provided and discussed. The half‐bridge MERS mitigates disadvantages of using MERS. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 169(4): 65–74, 2009; Published online in Wiley InterScience ( www.interscience. wiley.com ). DOI 10.1002/eej.20832     

Conventional detection of 2,4-dinitrophenol using quartz crystal microbalance

We present conventional detection of 2,4-dinitrophenol (DNP) for using the competitive reaction between DNP and DNP-conjugated albumin onto DNP antibody immobilized quartz crystal microbalance (QCM). This QCM method allows detection of DNP concentration in the range of 0.01 to 100 ng/ml; linear correlation obtains DNP concentration from 1 to 100 ng/ml.     

Information-theoretic investigation of impact of huggable communication medium on prefrontal brain activation*

This paper examines the effect of mediated hugs that are achieved with a huggable communication medium on the brain activities of users during conversations. We measured their brain activities with functional near-infrared spectroscopy (NIRS) and evaluated them with two information theoretic measures: permutation entropy, an indicator of relaxation, and multiscale entropy, which captures complexity in brain activation at multiple time scales. We first verify the influence of lip movements on brain activities during conversation and then compare brain activities during tele-conversation through a huggable communication medium with a mobile phone. Our analysis of NIRS signals shows that mediated hugs decrease permutation entropy and increase multiscale entropy. These results suggest that touch interaction through a mediated hug induces a relaxed state in our brain but increases complex patterns of brain activation.     

Note: Zr(IV)-Immobilized Resin Prepared by Surface Template Polymerization for Fluoride Ion Removal

Abstract

A novel adsorbent Zr(IV)-immobilized resin was prepared to remove fluoride ions from tap water and industrial wastewater. In order to enhance both the kinetics and efficiency, large pathways were formed in the resin for fluoride ion adsorption and the Zr(IV)-phosphate complexes were immobilized on the polymer surface by surface-template polymerization. The Zr(IV)-immobilized resin had a fluoride adsorption capacity of 0.30 mmol/g. The morphology of the Zr(IV)-immobilized resin was evaluated by measuring the specific surface area, pore volume, and pore size distribution. The resin possessed large amounts of large macropores with diameters around 300 nm. The molecular structure at the fluoride adsorption sites was investigated by measuring the amounts of phosphorus, zirconium, and fluoride ion in the resin, and developing a model complex using computational chemistry. On the polymer surface, a fluoride ion/Zr(IV)/dioleyl phosphoric acid complex with an ideal F:Zr:P mole ratio of 3:1:3 could be formed.     

Fatigue crack initiation and growth under mixed mode loading in aluminum alloys 2017-T3 and 7075-T6

Fatigue crack initiation and growth characteristics under mixed mode loading have been investigated on aluminum alloys 2017-T3 and 7075-T6, using a newly developed apparatus for mixed mode loading tests. In 2017-T3, the fatigue crack initiation and growth characteristics from a precrack under mixed mode loading are divided into three regions—shear mode growth, tensile mode growth and no growth—on the ΔK_I-ΔK_II plane. The shear mode growth is observed in the region expressed approximately by ΔK_II > 3MPa√m and ΔK_II/ΔK_I > 1.6. In 7075-T6, the condition of shear mode crack initiation is expressed by ΔK_II > 8 MPa√m and ΔK_II/ΔK_I > 1.6, and continuous crack growth in shear mode is observed only in the case of ΔK_I/ΔK_II, 0. The threshold condition of fatigue crack growth in tensile mode is described by the maximum tensile stress criterion, which is given by Δσ_θmax √2πr 1.6MPa√m, in both aluminum alloys. The direction of shear mode crack growth approaches the plane in which K_I decreases and K_II increases towards the maximum with crack growth. da/dN-ΔK_II relations of the curved cracks growing in shear mode under mixed mode loading agree well with the da/dN-ΔK_II relation of a straight crack under pure mode II loading.     

A high-speed 16-kb GaAs SRAM of less than 5 ns using triple-levelmetal interconnection

The authors have realized 16-kb SRAMs with maximum address access time of less than 5 ns and typical power dissipation of less than 2 W at temperatures ranging from 25°C to 100°C. For the RAMs, they have developed a triple-level Au-based interconnection technology that reduces the wiring length and chip size of the SRAM so as to achieve high speed and high yield. Consequently, the wiring length and chip size are reduced to 69% and 58%, respectively, of those obtained by in previous work. The authors experimentally compared the delay time incurred by double-level interconnection and that by triple-level interconnection. This ratio is found to agree well with the simulated one by a model with distributed RC delay. After successfully suppressing Au hillock generation by lowering the process temperature, yield per wafer of 10% is obtained