Optimizing the design of large-scale ground-coupled heat pump systems using groundwater and heat transport modeling

In order to predict the long-term performance of large-scale ground-coupled heat pump (GCHP) systems, it is necessary to take into consideration well-to-well interference, especially in the presence of groundwater flow. A mass and heat transport model was developed to simulate the behavior of this type of system in the Akita Plain, northern Japan. The model was used to investigate different operational schemes and to maximize the heat extraction rate from the GCHP system.     

Application of FeOC1 derivatives as cathode materials for secondary lithium battery II. Comparison of the discharge and charge characteristics of γ-FeOOH prepared from the intercalation compound of FeOC1 and 4-aminopyridine with those of FeOOH intercalated with aniline (a-FeOOH(AN))

The discharge and charge characteristics of γ-FeOOH products prepared from the intercalation compound of FeOC1 and 4-aminopyridine were investigated in lithium cells and compared with those of FeOOH prepared from the intercalation compound of FeOC1 and aniline (a-FeOOH(AN)). The polarization of γ-FeOOH cathode during the discharge and charge were larger than those of an a-FeOOH(AN) cathode. The electrochemical characteristics of the FeOOH products depend on the amorphous nature of the cathode material.     

Development of an Artificial Lipid-Based Membrane Sensor with High Selectivity and Sensitivity to the Bitterness of Drugs and with High Correlation with Sensory Score

This paper reports the development of membrane sensors based on an artificial lipid and plasticizers with high selectivity and sensitivity to drug bitterness by using bis(1-butylpentyl) adipate (BBPA), bis(2-ethylhexyl) sebacate (BEHS), phosphoric acid tris(2-ethylhexyl) ester (PTEH), and tributyl o-acetylcitrate (TBAC) as a plasticizer and phosphoric acid di-n-decyl ester (PADE) as an artificial lipid to optimize surface hydrophobicity of the sensors. In addition, a sensor with highly correlated bitterness sensory score was developed by blending BBPA and TBAC to detect the bitterness suppression effect of sucrose, and other bitter-masking materials. Therefore, this sensor can be used to evaluate the bitterness of various drug formulations with high accuracy. Copyright © 2009 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

CD147-Cyclophilin a Interactions Promote Proliferation and Survival of Cutaneous T-Cell Lymphoma

CD147, a transmembrane glycoprotein that belongs to the immunoglobulin superfamily, and cyclophilin A (CypA), one of the binding partners of CD147, are overexpressed in tumor cells and associated with the progression of several malignancies, including both solid and hematological malignancies. However, CD147 and CypA involvement in cutaneous T-cell lymphoma (CTCL) has not been reported. In this study, we examined CD147 and CypA expression and function using clinical samples of mycosis fungoides (MF) and Sézary syndrome (SS) and CTCL cell lines. CD147 and CypA were overexpressed by tumor cells of MF/SS, and CypA was also expressed by epidermal keratinocytes in MF/SS lesional skin. Serum CypA levels were increased and correlated with disease severity markers in MF/SS patients. Anti-CD147 antibody and/or anti-CypA antibody suppressed the proliferation of CTCL cell lines, both in vitro and in vivo, via downregulation of phosphorylated extracellular-regulated kinase 1/2 and Akt. These results suggest that CD147-CypA interactions can contribute to the proliferation of MF/SS tumor cells in both a autocrine and paracrine manner, and that the disruption of CD147-CypA interactions could be a new therapeutic strategy for the treatment of MF/SS.     

X-ray absorption near-edge structure study on positive electrodes of degraded lithium-ion battery

18650-type cylindrical cells using LiNi_1/3Mn_1/3Co_1/3O₂ (NMC) and hard carbon as positive and negative electrode material, respectively, were fabricated and degraded by cycle tests. The capacity of the cells remained more than 95% and 85% after cycle tests at 25 and 50 °C, respectively. After the cycle tests, Li-deficient cubic phase was observed on the surface of NMC. This phenomenon should be related to the degradation mechanism of this type of cell.     

High-frequency Lamb wave device composed of MEMS structure using LiNbO3 thin film and air gap

High-frequency devices operating at 3 GHz or higher are required, for instance, for future 4th generation mobile phone systems in Japan. Using a substrate with a high acoustic velocity is one method to realize a high-frequency acoustic or elastic device. A Lamb wave has a high velocity when the substrate thickness is thin. To realize a high-frequency device operating at 3 GHz or higher using a Lamb wave, a very thin (less than 0.5 μm thick) single-crystal plate must be used. It is difficult to fabricate such a very thin single crystal plate. The authors have attempted to use a c-axis orientated epitaxial LiNbO(3) thin film deposited by a chemical vapor deposition system (CVD) instead of using a thin LiNbO(3) single crystal plate. Lamb wave resonators composed of a interdigital transducer (IDT)/the LiNbO(3) film/air gap/base substrate structure like micro-electromechanical system (MEMS) transducers were fabricated. These resonators have shown a high frequency of 4.5 and 6.3 GHz, which correspond to very high acoustic velocities of 14,000 and 12,500 m/s, respectively, have excellent characteristics such as a ratio of resonant and antiresonant impedance of 52 and 38 dB and a wide band of 7.2% and 3.7%, respectively, and do not have spurious responses caused by the 0th modes of shear horizontal (SH(0)) and symmetric (S(0)) modes.     

Determination of p-hydroxymandelic acid enantiomers in urine by high-performance liquid chromatography with electrochemical detection

High-performance liquid chromatography (HPLC) with electrochemical detection using a chiral ligand-exchange column was developed for the enantioselective determination of p-hydroxymandelic acid (HMA), a metabolite of synephrine, with high sensitivity. A good linear relationship between current ratio and amount was noted for 0.5-500 pmol HMA, with a correlation coefficient of 0.999 for each HMA enantiomer. The relative standard deviation (R.S.D.) was 1.6% at 100 pmol d-HMA and 2.2% at 100 pmol l-HMA. The detection limit of each HMA enantiomer was 0.5 pmol (signal to noise ratio, S/N = 3). By this method, HMA in Citrus unshiu and in urine following the ingestion of C. unshiu was determined. Although no HMA was found in c. unshiu, d- and l-HMA were present in urine after the ingestion of C. unshiu. The time courses of HMA and conjugated synephrine enantiomers excreted in urine following the ingestion of C. unshiu for 24 h could be monitored. This method should prove applicable to the study of synephrine metabolism.     

Application of room temperature ionic liquids to Li batteries

Novel electrolyte materials, room temperature ionic liquids (RTILs) were applied to the Li battery system and their characteristics in Li-metal batteries are discussed, partly reviewing authors work in the past. Quaternary ammonium (QA) cation-imide RTIL was focused on because of the excellent stability in cathodic environment of Li. Li/LiCoO₂ cell performance and Li cycling efficiency using the selected QA-imide RTIL was almost satisfactory. In addition, thermal stability of selected QA-imide RTIL with the charged positive electrode and Li was the advantage for Li battery. On the other hand, further improvement in the conducting properties is required with balanced approach for both electrochemical stability and thermal stability in order to use the RTIL electrolyte practically in batteries.     

Numerical modeling of the Momotombo geothermal system, Nicaragua

The Momotombo geothermal field, Nicaragua, has been under commercial production since 1983; presently it has an installed capacity of 77 MWe. A three-dimensional, porous-media numerical model of the system was developed and calibrated using the code iTOUGH2, and was utilized to study the response of the geothermal reservoir under different fluid production and injection scenarios. Satisfactory agreements were obtained between measured and computed discharge enthalpies and flow rates for most of the shallow wells. The model also qualitatively reproduced the pressure drawdowns measured in selected wells.