Continuous formation of slurry ice by cooling water–oil emulsion in a tube

Water-silicone oil emulsion with an additive, (C₂H₅O)₃SiC₃H₆NH₂, was examined as a heat storage material. A spiral tube used as a heat exchanger was immersed in a low temperature bath and the emulsion was circulated in the tube to make ice continuously. Ice was separated from the ice–liquid suspension in an outlet tank. The amount of formed ice, the temperatures of the inlet and the outlet of the heat exchanger, and the temperatures in the tube wall were measured and the overall heat transfer coefficient and the heat flux through the tube were calculated. Experiments were carried out, varying the flow rate, the temperature of cooling brine, and the thickness of tube wall. The condition under which slurry ice was formed continuously without adhesion of ice to the cooling wall was clarified. Though decrease in the thermal resistance of the tube increased the rate of ice formation or raised the brine temperature, it narrowed the range of the flow rate and of the brine temperature in which slurry ice was formed continuously.     

Morphological characteristics of flood refugia of cobble-bed vegetation

Periodic flooding alters riverine vegetation community composition; moderate flood disturbance maintains communities at an early seral stage, whereas severe floods may remove entire communities. After disturbance, plants may recolonize riverbeds from refugia.Here, we investigated the morphological characteristics of refugia where riverine plants survived large floods. At three sites, plant communities growing on cobble-bars were surveyed, and the hydraulic characteristics of each site were analyzed. The populations of an indicator plant, Anaphalis margaritacea sub-species yedoensis (Franch. et Savat.) were assessed after major floods in 2004 and 2009. At each survey, the particle size and bed composition were measured, and the critical shear-stress required to move particles at each site was calculated. A one-dimensional flow and the average and local shear-stress at ten different discharges, including that of the largest flood were calculated. The results demonstrate that the A. margaritacea community is maintained at locations where the local shear-stress at peak discharge in large-floods does not exceed a critical value. These conditions were achieved in locations with particular morphological characteristics, where the river is not constrained by levees and is restricted by a downstream narrow-pass; in this reach river width increases with discharge thus limiting the increase in water depth with increasing discharge and allowing the establishment of refugia where plant species may survive large floods.Flooding and reestablishment from refugia maintain a characteristic riverbed community in equilibrium.     

A computer-aided design of EMC microstrip dipole arrays using nonlinear optimization techniques

This paper describes a method for designing electromagnetically coupled (EMC) printed dipole arrays. The advantages of EMC dipoles include greater bandwidth, higher efficiency, and an easier match to the feed lines, when compared to classically fed printed antennae. The excitation mechanism is provided by a strip transmission line embedded inside the substrate which couples energy parasitically to the microstrip antenna. Electromagnetically coupled microstrip dipoles have been investigated by empirical or approximate analysis techniques. As a result an approximate model has been derived for microstrip dipoles. The method is based on the method of moments solution to an integral equation derived from the approximate Green function for a grounded dielectric slab. The element lengths and offsets and the stub length of the EMC dipole array are determined by the direct search optimization method of Hooke and Jeeves. To show the feasibility of the proposed method, a mathematical formulation and numerical results are presented for Chebyshev arrays. © 1998 Scripta Technica, Electr Eng Jpn, 125(4): 60–66, 1998     

Development of transient stability controller system (TSC) based on on-line stability calculation

A new transient stability controller system (TSC) based on on-line transient stability calculation has been developed. The TSC system prevents the power system from wide-area blackout by shedding generators optimally when a serious fault occurs. This system consists of a central processing unit (TSC-P), and four local units for fault detection (TSC-C), and seventeen units for generator shedding (TSC-T). The TSC-P selects optimal generators to be shed for stabilization based on on-line transient stability calculation for contingencies at 500 kV lines and buses every five minutes. The results are transmitted to the TSC-Cs periodically. Should any fault occur, only one TSC-C will detect the fault occurrence and send control signals to the TSC-Ts which actually generate shedding signals. To realize the TSC system, essential are fast stability evaluation methods for a large number of contingencies and effective selection methods of optimal generators to be shed for stabilization. This paper presents total algorithms applied in the TSC-P, the results of algorithm verification tests using a prototype system combined with a large-scale analog simulator, and the characteristics of the actual system.     

Zeolite synthesis from paper sludge ash at low temperature (90 degrees C) with addition of diatomite

Paper sludge ash was partially converted into zeolites by reaction with 3M NaOH solution at 90 degrees C for 24 h. The paper sludge ash had a low abundance of Si and significant Ca content, due to the presence of calcite that was used as a paper filler. Diatomite was added to the NaOH solution to increase its Si content in order to synthesize zeolites with high cation exchange capacity. Diatomite residue was filtered from solution before addition of ash. The original ash without addition of diatomite yielded hydroxysodalite with a cation exchange capacity ca. 50 cmol/kg. Addition of Si to the solution yielded Na-P1 (zeolite-P) with a higher cation exchange capacity (ca. 130 cmol/kg). The observed concentrations of Si and Al in the solution during the reaction explain the crystallization of these two phases. The reaction products were tested for their capacity for PO(4)(3-) removal from solution as a function of Ca(2+) content, suggesting the formation of an insoluble Ca-phosphate salt. The product with Na-P1 exhibits the ability to remove NH(4)(+) as well as PO(4)(3-) from solution in concentrations sufficient for application in water purification. Both NH(4)(+) and PO(4)(3-) removal showed little variation with pH between 5 and 9. Alternative processing methods of zeolite synthesis, including the addition of ash to an unfiltered Si-NaOH solution and addition of a dry ash/diatomite mixture to NaOH solution, were tested. The third process yielded materials with lower cation exchange capacity due to formation of hydroxysodalite. The second process results in a product with relatively high cation exchange capacity, and reduces the number of processing steps necessary for zeolite synthesis.     

Better governance for integrated management of the Lake Biwa—Yodo River Basin

The present study discusses the efforts of the Union of Kansai Governments to resolve serious issues in the Lake Biwa—Yodo River Basin in Japan. It identifies many of the issues related to the basin on a ‘no man's land’ mindset of today's governmental framework, which has constrained both the will and the approach to remedy the associated problems. It also highlights better governance that not only encourages individual efforts, but also promotes collaboration and cooperation among the major stakeholders in the area, as important to developing acceptable solutions to relevant issues. The present study also recognizes objective scientific evidence as an effective driver for improving governance, being the basis for making informed decisions and highlighting the use of appropriate indicators to evaluate the conditions characterizing a specific location or the basin as a whole. The present study also describes the Union of Kansai Governments as a behind‐the‐scenes coordinator that gathers knowledge and intelligence on the basin, and works to integrate policies by getting basin stakeholders to gradually improve governance by repeating a cycle of: (a) recognizing the current situation; (b) identifying relevant issues to be addressed; (c) establishing a framework and policy for collaboration and corporation; and (d) taking necessary actions. To this end, the present study discusses the studies and efforts of the Union of Kansai Governments to develop and implement integrated management of this important interlinked lake–river water system in Japan.     

Influence of dilution by polydimethylsiloxane on electrorheological effect of side-chain liquid crystalline polysiloxane

A liquid crystalline polysiloxane (LCP), having an ether bond in the spacer between its siloxane main chain and its mesogenic-group side chains, exhibited a very small electrorheological (ER) effect or increase in shear stress upon application of an electric field, but mixtures of the LCP and polydimethylsiloxane (PDMS) exhibited a sharply increasing ER effect with increasing PDMS content throughout the tested range of up to 0.5 of PDMS weight fraction. When phenyl-substituted PDMS (Ph-PDMS) at a weight fraction of 0.3 was used instead of PDMS, however, the ER effect decreased with increasing phenyl content and became nearly undetectable with Ph-PDMS having a phenyl content (ratio of substituted phenyl groups to initial methyl groups) of approximately 15%. DSC analyses showed that the ER effect of the LCP/PDMS mixtures occurred undiminished throughout a temperature range in which LCP itself is an isotropic liquid in the absence of an applied electric field and suggested that the LC structure of the LCP was maintained even when it was diluted with PDMS in weight fractions of 0.5 or higher, but disrupted when diluted by a 0.3 weight fraction of Ph-PDMS having a 15% phenyl content. Optical microscopic observation of the mixtures of the LCP with a 0.3 weight fraction of PDMS or Ph-PDMS (15% phenyl content) showed that both consisted of uniformly dispersed micron-sized droplets which became elongated in the direction of the applied electric field when it was applied alone but became smaller when both the electric field and shear were applied. These results suggest that the phase separation between the LCP and the dilution oil, as well as the existence and orientation of LC domains, is essential for the generation of a large ER effect. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 64: 1319–1328, 1997     

Evaluation of patient doses due to fluoroscopic exposures

The present study measures entrance surface doses of radiation administered to patients during various fluoroscopic procedures using a dose-area product meter as well as the duration of each procedure. A conversion factor for entrance skin dose to patients was calculated. The average dose to patient during the insertion of intravenous hyperalimentation was 10.2 (maximum, 74.0) mGy, during a barium meal, 58.4 (maximum, 184.0) mGy, for endoscopic retrograde cholangio-pancreatography (ERCP), 97.3 (maximum, 376.0) mGy and for a barium enema, 86.1 (maximum, 271.0) mGy. Doses tended to increase in the abdominal domain and when patients undergo not only diagnostic evaluation but also treatment requiring procedures such as drainage. The management of radiation doses determined using a dose-area product meter is very important and that of individual patients is enabled using the Radiation Information System (RIS).     

A physical map of chromosome 7 of Candida albicans

As part of the ongoing Candida albicans Genome Project, we have constructed a complete sequence-tagged site contig map of chromosome 7, using a library of 3840 clones made in fosmids to promote the stability of repeated DNA. The map was constructed by hybridizing markers to the library, to a blot of the electrophoretic karyotype, and to a blot of the pulsed-field separation of the SfiI restriction fragments of the genome. The map includes 149 fosmids and was constructed using 79 markers, of which 34 were shown to be genes via determination of function or comparison of the DNA sequence to the public databases. Twenty-five of these genes were identified for the first time. The absolute position of several markers was determined using random breakage mapping. Each of the homologues of chromosome 7 is approximately 1 Mb long; the two differ by about 20 kb. Each contains two major repeat sequences, oriented so that they form an inverted repeat separated by 370 kb of unique DNA. The repeated sequence CARE2/Rel2 is a subtelomeric repeat on chromosome 7 and possibly on the other chromosomes as well. Genes located on chromosome 7 in Candida are found on 12 different chromosomes in Saccharomyces cerevisiae.     

A new calculation method of voltage rise of transmission towers and transmission lines by lightning stroke and calculated results

New formulas for the surge impedances of transmission towers and transmission lines in lightning surge are derived. A comparison of results calculated by the proposed formulas with the experimental results show nearly the same wave crest values and wave-forms. It is demonstrated that a large portion of the input current flows into the tower and only a small current flows into the ground wires. This fact is very important in investigating lightning performance in transmission towers and transmission lines. The results will be helpful in developing improved modes of transmission system performance.