Adhesion of streptococci to saliva-coated and uncoated composite-based resins

This study was designed to evaluate the bacterial adhesion to five types of experimental composite-based resins and a commercial composite resin used as a control. Physicochemical surface characteristics of composite resins with and without an artificial saliva coating were measured. The relationship between the numbers of adhering cells (Streptococcus sanguis, S. mutans and S. sobrinus) and surface characteristics was analysed. The values of contact angles and the number of adhering cells were small with saliva coating. S. sanguis ATCC 10557 showed a positive correlation (r=0.835, p<0.05) with the contact angles of uncoated resins, whereas no relationship was observed for saliva-coated resins. With S. mutans Ingbritt the cell numbers adhering to resins correlated strongly (p<0.01) with the values of zeta potential of resins for either saliva coated or uncoated. Electrical repulsion forces had a strong contribution to adherence of cells such as S. mutans and S. sobrinus which show a high absolute zeta potential.     

Latest advances in camcorder technology

Camcorders have been developed to be compact with high performance. Latest advancement of key technologies and devices such as digital signal processing LSI, six-layer printed circuit board with micro chips, high-speed power lens with linear motor, 103 K pixels 0.7-in LCD electronic viewfinder, and high-energy Li-ion battery are described. High-band format is also explained     

3-D face recognition method based on optimum 3-D image measurement technology

Most face recognition systems employ 2-D color or gray-scale images. However, face recognition based on 2-D images is adversely affected by 3-D movement, variable lighting, and the use of cosmetics. 3-D image measurement technology has the potential to overcome these limitations of face recognition based on 2-D images since it can perform geometric analysis. We propose a method that is capable of recognizing a person from a 3-D facial image obtained using a 3-D shape measurement system by employing a technique that optimizes the intensity-modulation pattern projection. This face recognition method is based on the iterative closest point algorithm. It is robust to changes in reflectivity and color. Since the 3-D facial information can be registered, this method can estimate rotations and translations to compensate for different positions or directions. In order to prove the validity of the proposed technique, a verification experiment was conducted which used 105 sample 3-D images obtained from 15 subjects. It achieved a detection rate of 96% when heads were turned at an angle of 20° or less relative to the camera.     

Application of the solid polymer electrolyte (SPE) method to organic electrochemistry—III. Kolbe type reactions on Pt-SPE

The feasibility of a solid polymer electrolyte (SPE) method for Kolbe type reactions was investigated by using Pt-SPE composed with Nafion 415 and platinum. The Kolbe reaction of acetic acid proceeded effectively on one side and both sides Pt-SPE composites. The lower current efficiency was observed on the latter than on the former. Neat acetic acid could also be electrolysed on both sides SPE though the cell voltage was fairly high.A methanolic solution of monomethyl adipate was electrolysed to give dimethyl sebacate on both sides Pt-SPE according to the Brown-Walker reaction. The current efficiency and the terminal voltage increased with the concentration of monomethyl adipate. Pt-SPE behaved as an active electrode of a high roughness factor, eg about 6, for the Kolbe reaction of acetate.     

Conductive Papers Containing Metallized Polyester Fibers for Electromagnetic Interference Shielding

Conductive papers were developed for preventing or reducing electromagnetic interference (EMI), and their shielding efficiency was evaluated. This type of conductive paper consists of wood pulp, synthetic pulp and metallized polyester fibers (0.5–2.0 mm long and 14 m in diameter) whose surfaces are coated with nickel alone (Ni-PET) or copper and nickel double layers (Ni-Cu-PET) by electroless plating. In this report, the effect of the characteristics of these metallized fibers, such as their conductivity, geometry and the concentration of fibers in paper, which lead to high efficiency for shielding effectiveness is discussed. For instance, one of the conductive papers (80 g/m2) which was prepared by mixing 40% Ni-Cu-PET and 60% synthetic polyethylene pulp showed over 40 dB shielding effectiveness between 10 MHz and 1 GHz.     

Effect of Grain Boundaries on Thermal Conductivity of Silicon Carbide Ceramic at 5 to 1300 K

The thermal conductivity of a SiC ceramic was measured as 270 W·m⁻¹·K⁻¹ at room temperature. At low temperatures ( T < 25 K), the decrease in the conductivity was proportional to T ³ on a logarithmic scale, which indicated that the conductivity was controlled by boundaries. The calculated phonon mean free path in the ceramic increased with decreased temperature, but was limited to ∼4 μm, a length almost equal to the grain size, at temperatures below 30 K. We concluded that the thermal conductivity of the ceramic below 30 K was influenced significantly by grain boundaries and grain junctions.     

Barium Carbonate Phase on the Surfaces of Barium Titanate Particles and in Situ Transmission Electron Microscopy Observation of Its Decomposition

A BaCO₃ phase is found on the surfaces of hydrothermally synthesized BaTiO₃ particles; it occurs as aggregates or small protuberances. A small proportion of the phase decomposes to BaO crystallites when heated by a convergent electron beam in a transmission electron microscope. The BaO and BaCO₃ crystallites disappear when they are irradiated successively by the convergent electron beam. The BaO crystallites and the BaCO₃ phase sublimate and/or react with BaTiO₃ crystals whose surface layers are deficient in Ba²⁺ ions.     

Investigation of the effect of surface phosphate ester dispersant on viscosity by coarse-grain modeling of BaTiO slurry

To understand the role of phosphate ester dispersant, we investigated the rheology of a BaTiO slurry. For the model case, a coarse-grain molecular dynamics (CGMD) simulation was performed with the butyral polymer didodecyl hydrogen phosphate (DHP) in the toluene/ethanol solvent. By systematically analyzing the effect of DHP from an atomic-scale first principle and from all-atom MD to microscale CGMD simulation, we investigated how the adsorption of a DHP dispersant on a BaTiO surface affects the microstructure rheology of a BaTiO slurry. The first-principle and all-atom MD simulation suggests that DHP molecules prefer to locate near the BaTiO surface. CGMD simulation shows a reduction in viscosity with an increase in dispersants, suggesting that the dispersant population near the BaTiO surface plays a key role in controlling the rheology of the BaTiO slurry. In this study, we propose an approach for understanding the BaTiO slurry with molecular-level simulations, which would be a useful tool for efficient optimization of slurry preparation.     

Structural Modulations in Monoclinic Tricalcium Silicate Solid Solutions Doped with Zinc Oxide, M(I), M(II), and M(III)

Structural modulations in solid solutions of C₃S doped with various amounts of ZnO were investigated via the selected-area electron diffraction method. Three monoclinic modifications (M(I), M(II), and M(III)) were identified in the solid solutions. The modifications had pseudohexagonal subcells that were modulated to form supercells. Coordinates of the reflections attributable to the supercells could be expressed by the following linear combinations of vectors of the reciprocal lattices: m₁(−2 a */5.4 + 2 b */5.4 − 7 c */5.4) for M(I), m₂(− a */5 + b */5 − c *) for M(II), and m₃(− a */6 + b */6 + 7 c */6) for M(III), m₁ and m₂=±1 and ±2, and m₃=±1, ±2, and ± 3. All the monoclinic modifications possessed structural modulations of a one-dimensional type. The modulation waves could be detected as wavy contrasts by high-resolution transmission electron microscopy.     

Stabilization of β-Bi2O3 by Sb2O3 Doping

The metastable β form of bismuth sesquioxide was obtained by doping antimony oxide. The solubility of antimony was 4 to 10 at. %in β specimens, where more than 75% of the antimony atoms were valenced at 5+.