Recovery of fluorocarbons in Japan as a measure for abating global warming

The objective of this study is to evaluate the potential for recovering fluorocarbons as measures for the abatement of global warming. In this study, we focused on the three different kinds of fluorocarbons: CFCs, HCFCs and HFCs, and targeted refrigerant use because of the availability of relevant data. We first estimated future fluorocarbon emissions from the targeted appliances; we next compared those emissions in the units of CO₂ equivalent to the level of CO₂ emissions in 1990 from a quantitative point of view. As the result of this study, it was found that fluorocarbon emissions in 1999 and 2010 would be equal to approximately 7 and 3% of the level of CO₂ emissions in 1990 respectively. Moreover, if we implement a 100% recovery rate in every recovery route, we can reduce a large amount of emissions which correspond to approximately 2–5% of the level of CO₂ emissions in 1990, even if we take into account the energy-related CO₂ emissions by the transportation and decomposition of fluorocarbons.     

Use of a YAP1 overexpression cassette conferring specific resistance to cerulenin and cycloheximide as an efficient selectable marker in the yeast Saccharomyces cerevisiae.

Drug-resistance markers for yeast transformation are useful because they can be applied to strains without auxotrophic mutations. However, they are susceptible to technical difficulties, namely lower transformation efficiency and the appearance of drug-resistant mutants without the marker. To avoid these problems, we have constructed a phosphoglycerate kinase (PGK) promoter-driven YAP1 expression cassette, called PGKp-YAP1. Yeast cells containing PGKp-YAP1 were resistant to cycloheximide, a protein synthesis inhibitor, and also to cerulenin, a fatty acid synthesis inhibitor, but not to other drugs tested. The transformation efficiency of PGKp-YAP1 using cerulenin selection was comparable to that using a URA3 auxotrophic marker when low concentrations of cerulenin were used. Non-transformed drug-resistant colonies did appear on the low-concentration cerulenin plates. However, these non-transformed colonies could easily be identified, based on their cycloheximide sensitivity and/or their resistance to aureobasidin A to which the transformants were sensitive. Therefore, the dual drug resistance of PGKp-YAP1 could be used as an effective selection for PGKp-YAP1 recipient cells. The PGKp-YAP1 marker was used to disrupt the LYS2 gene and to transform an industrial yeast strain, indicating that this marker can be used for efficient and reliable gene manipulations in any Saccharomyces cerevisiae strain.     

An ESR study of the film formation steps of vapor deposition polymerization of polyamic acid

A film of polyamic acid is formed by vapor deposition polymerization of pyromellitic dianhydride (PMDA) and 4,4′-diaminodiphenyl ether (ODA). We have taken ESR spectrum during the polymerization process and compared it with the ESR spectrum of films obtained from solution polymerization. In the intermediate polymers during vapor deposition polymerization, the amide bond (? CONH? ) is coplanar with the benzene ring and two protons in the PMDA molecule. This intermediate polymer has one unpaired electron that interacts with the two nitrogen nuclei equally. On the other hand, in the polymer obtained by solution polymerization, the amide bond and the benzene ring of PMDA are not coplanar. In this polymer, too, some of the molecules have an unpaired electron that seems to have almost no coupling with NH groups. These results imply that the polymer formation via vapor deposition proceeds through different intermediates and different molecular configurations from that via the solution process.     

Mean molal activity coefficients of aqueous scandium chloride, nitrate, bromide and perchlorate solutions at 25.0°

The mean molal activity coefficients of aqueous scandium chloride, nitrate, bromide and perchlorate solutions were determined at 25.0° for dilute to saturated concentrations, together with the activities of water. In the dilute solutions of scandium halides, the activity coefficients were obtained from electromotive force measurements on galvanic cells, and the osmotic coefficients of all four solutions above 0.1 mol kg⁻¹ were determined from the isopiestic measurements. Least-squares equations were fitted to these coefficients, which were then used to calculate the mean molal activity coefficients and water activities. The relationships between these results and the corresponding activity data for other rare earth salts, and to the cation hydration and ionic interactions, are discussed. The results on scandium perchlorate solutions suggested that the inner-sphere hydration number of tervalent scandium ion may be seven.     

Catabolic fate of dietary trilinoleoylglycerol hydroperoxides in rat gastrointestines

To elucidate whether dietary lipid peroxides are absorbed in the body, the catabolic fate of trilinoleoylglycerol hydroperoxides (TL-OOH), in the gastrointestines of rats was examined. Oxidized trilinoleoylglycerol with a peroxide value of 1000 meq/kg, 0.5 or 20 mg, was dosed intragastrically to rat together with 59.5 or 40 mg unoxidized trilinoleoylglycerol, respectively. The fate of TL-OOH in gastric and intestinal lumina was determined by high-performance liquid chromatography periodically until 240 min after treatment. At low dose, TL-OOH was soon broken down to linoleic acid hydroperoxides (LA-OOH) and hydroxyls, probably through gastric lipases, whereas at high dose, TL-OOH was retained in the stomach. In both cases, TL-OOH did not reach the intestines, though the unoxidized lipids moved to the intestines. When LA-OOH was given intragastrically, the lipids decomposed in the stomach, and linoleic acid hydroxyls, hexanal, 9-oxononanoic acid, and two novel compounds were detected 30 min after treatment. The novel compounds were identified to be epoxyketones, 11-oxo-12,13-epoxy-9- and 11-oxo-9,10-epoxy-12-octadecenoic acids. Thus, dietary TL-OOH was broken down in the stomach releasing, LA-OOH which decomposed further, and did not reach the intestines.     

CO2气体保护的激光焊接12mm厚低碳钢板

采用CO2 作为保护气体消除大熔深激光焊接低碳钢时易发生的气孔问题 ,并对比研究了CO2 和Ar气保护条件下 12mm厚低碳钢板激光焊缝的组织和韧性。焊接试验利用 4kWNd :YAG激光器 ,采用双面深熔焊的方法 ,焊接条件为 4kW激光功率和0 .3 ,0 .5m/min的焊接速度。冲击试验采用一种自行设计的带侧面缺口的三缺口冲击试样 ,以保证断裂全部发生在焊缝。结果表明 ,利用CO2 作保护气体焊接低碳钢板 ,可以有效消除大熔深激光焊接时的气孔问题 ,并获得比Ar气保护下硬度较低 ,冲击韧性高的焊缝。研究工作为解决大功率激光深熔焊时容易发生的气孔问题提供了一条有效途径     

Links between Immune Cells from the Periphery and the Brain in the Pathogenesis of Epilepsy: A Narrative Review

Accumulating evidence has demonstrated that the pathogenesis of epilepsy is linked to neuroinflammation and cerebrovascular dysfunction. Peripheral immune cell invasion into the brain, along with these responses, is implicitly involved in epilepsy. This review explored the current literature on the association between the peripheral and central nervous systems in the pathogenesis of epilepsy, and highlights novel research directions for therapeutic interventions targeting these reactions. Previous experimental and human studies have demonstrated the activation of the innate and adaptive immune responses in the brain. The time required for monocytes (responsible for innate immunity) and T cells (involved in acquired immunity) to invade the central nervous system after a seizure varies. Moreover, the time between the leakage associated with blood–brain barrier (BBB) failure and the infiltration of these cells varies. This suggests that cell infiltration is not merely a secondary disruptive event associated with BBB failure, but also a non-disruptive event facilitated by various mediators produced by the neurovascular unit consisting of neurons, perivascular astrocytes, microglia, pericytes, and endothelial cells. Moreover, genetic manipulation has enabled the differentiation between peripheral monocytes and resident microglia, which was previously considered difficult. Thus, the evidence suggests that peripheral monocytes may contribute to the pathogenesis of seizures.     

Dynamic moduli for short fiber-CR composites

The dynamic moduli, E′ and E″, and tan δ for nylon–CR and PET–CR composites with unidirectional short fibers were studied as a function of temperature by using a Rheovibron. The temperature dependence of tan δ showed two dispersion peaks for nylon–CR composite. The peak at ?28°C corresponded to the main dispersion of CR and the peak at 100°C to the α-dispersion of nylon 6. For a PET-CR composite, in addition to the individual dispersion of CR and PET, a small and broad peak was observed at about 90°C. The angular dependence of E′ indicated that the short fibers assumed good orientation. The storage modulus for the composites was given by the parallel model as E′ = V_f′E_f + V_mE′_m., where E′_c, E′_f and E′_m were the storage modulus for the composite, fiber, and matrix and V_f and V_m were the volume fraction of fiber and matrix, respectively. In the transverse direction of fiber, the peak values of tan δ at ?28°C were given by the following equation; tan δ_c = tan δ_m ? δV_f, where tan δ_c and tan δ_m are the loss tangent for the composite and matrix, respectively, and α is coefficient depending on fiber type. The results indicated that a region with strong interaction was formed between fibers and CR matrix.     

Novel method of preparing Ag–Hg alloy on polyacrylamide films and their structure

A novel method is proposed of preparing thin Ag–Hg alloy on PAAm film surface at room temperature: The film of interest is formed by holding PAAm aqueous solution with AgNO₃ in Hg-saturated atmosphere. Two kinds of films, one of which is a conductor and the other an insulator, can be selectively formed with pH-controlled PAAm solution by ammonia. The conducting surface is assigned to the α phase of Ag–Hg alloy by means of X-ray analysis. Potentiometric titration and IR spectral studies suggest the existence of PAAm–Ag⁺ complexes. On the basis of their structure and the oxidation and reduction potential of Ag⁺ and Hg²⁺, the mechanism of film formation is also discussed.     

Development of AAS resin by the emulsion–suspension polymerization method

In order to improve the weatherability of acryonitrile—styrene—butadiene rubber graft polymer (ABS resin), an attempt was made to develop a resin (AAS resin) in which acrylic rubber of good weatherability was used instead of butadiene rubber. First, by copolymerizing dicyclopentenyl-methacrylate (DCP-MA,3%) with butyl acrylate, crosslinked acrylic rubber was obtained. This also introduced grafting sites into the rubber. Next, methods of graft copolymerizing styrene and acrylonitrile with this rubber were examined. An emulsion–suspension polymerization method was developed in which the initial stage of the polymerization, emulsion polymerization, changed into suspension polymerization during the process. By this method of polymerization, rubber particles were combined and enlarged, bringing about a graft-type resin with high impact resistance. This polymerization method is industrially useful because particle-shaped resins are obtained without the need of a salting-out process. The AAS resin, obtained in this way, has much improved weatherability over ABS resin and shows strength equal to that of ABS resin. © 1992 John Wiley & Sons, Inc.