Influence of various types of load-dependent supports on the stability of a compressible column model

Summary The nonlinear behaviour and static stability of a compressible elastic column whose flexural resistance changes as it is loaded is studied. A two-degree-of-freedom, compressible rod model of the column is analysed. Various types of load-stiffness relationships are considered. Post-buckling behaviour under static unidirectional loads is investigated. Singularities of the equilibrium paths of the column are classified according to the slenderness ratio of the column and the load-stiffness relationship of its support.On leave from Department of Mechanical Engineering, University of Toronto, 5 King's College Road Toronto, Ontario, Canada, M5S 1A4     

Textile supercapacitors‐based on MnO2/SWNT/conducting polymer ternary composites

This paper describes a simple and fast process for the fabrication of flexible and textile‐based supercapacitors. Symmetric electrodes made up of binder‐free ternary composites of manganese oxide (MnO₂) nanoparticles, single walled carbon nanotubes (SWNT) and a conducting polymer (either polyaniline (PANI) or poly(3,4‐ethylenedioxythiophene)–poly(styrenesulfonate) (PEDOT:PSS)) were layer‐by‐layer deposited onto cotton substrates by dip coating method. Solid‐state supercapacitor devices were assembled using a gel electrolyte. Specific capacitances of 294 F/g and 246 F/g were obtained for MnO₂/SWNT/PANI and MnO₂/SWNT/PEDOT:PSS ternary nanocomposite supercapacitors, respectively. Power densities for these supercapacitors were 746.5 W/kg and 640.5 W/kg for MnO₂/SWNT/PANI and MnO₂/SWNT/PEDOT:PSS, respectively. Good capacity retention (more than 70%) upon cycling over 1000 times was achieved for both electrode compositions. Supercapacitors demonstrated in this work would be well suited as disposable power sources for wearable and intelligent textiles. Copyright © 2015 John Wiley & Sons, Ltd.     

A Study on the New Empirical Cross Section Formulae for (γ, p) Reactions at 20 ± 1 MeV Incident Energy

In this study, we have investigated theoretical cross sections of (γ, p) reactions at 20?±?1 MeV for the photon incident energy and then we have obtained two new empirical formulae for 40?≤?A?≤?108 and for the even Z-even N target nuclei including new fitting parameters. These new empirical formulae depending on the asymmetry parameters (s?=?(N???Z)/A) were determined by using the least squares approximation fitting method to the available experimental cross section data taken from EXFOR. The results have been compared with the experimental data and found to be well in agreement.     

Zinc Oxide Nanowire Decorated Single‐Use Electrodes for Electrochemical DNA Detection

The surfaces of pencil graphite electrodes (PGEs) were decorated with zinc oxide nanowires (ZnO NWs) for the electrochemical detection of nucleic acids. ZnO NWs were synthesized through simple hydrothermal method. PGEs decorated with ZnO NWs (ZnO NW/PGEs) were electrochemically characterized through cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) following morphological characterization through transmission (TEM) and scanning electron microscopy (SEM). Enhanced sensor response obtained using ZnO NW/PGEs contrary to the bare PGE (control) samples. Our preliminary results simply reveal the potential of combining ZnO NWs with disposable sensor technology for the electrochemical detection of DNA.     

All Solution‐Based Fabrication of Copper Oxide Thin Film/Cobalt‐Doped Zinc Oxide Nanowire Heterojunctions

Versatile and intriguing solution‐based processes are utilized to synthesize nanostructured materials for device applications to reduce material production and device fabrication costs. This study presents results on the fabrication and characterization of copper oxide (CuO) coated cobalt‐doped zinc oxide nanowires (Co‐doped ZnO NWs)‐based heterojunction diodes prepared by a two‐step synthesis route through combined hydrothermal growth and sol–gel spin coating. Highly dense, well‐ordered, undoped, and Co‐doped ZnO NWs were successfully grown by hydrothermal method. Complementary CuO thin films were synthesized by sol–gel method and subsequently coated onto both undoped and Co‐doped ZnO NWs through spin‐coating technique. Enhanced diode properties with a rectification ratio of 10³ at ±2 V and an ideality factor of n = 2.4 (in dark) were obtained for Co‐doped ZnO NWs‐based heterojunction diodes. The obtained results demonstrated that the investigated heterojunction diode structure fabricated by facile and cost‐effective solution‐based processes can be a promising candidate for the next generation optoelectronic devices.     

Highly Efficient Room Temperature Synthesis of Silver‐Doped Zinc Oxide (ZnO:Ag) Nanoparticles: Structural,Optical, and Photocatalytic Properties

Synthesis of silver‐doped zinc oxide (ZnO:Ag) nanoparticles through precipitation method has been reported. The synthesis was conducted at room temperature and no subsequent thermal treatment was applied. ZnO nanoparticles were characterized by X‐ray diffraction (XRD), transmission electron microscopy (TEM), X‐ray photoelectron spectroscopy (XPS), fourier transmission infrared spectroscopy (FTIR), and ultraviolet‐visible (UV–Vis) spectroscopy. Detailed crystallographic investigation was accomplished through Rietveld refinement. The effect of silver content on structural and optical properties of resultant ZnO nanoparticles has been reported. It was found that silver doping results in positional shifts for the XRD peaks and the absorption band edge of ZnO. These were attributed to the substitutional incorporation of Ag⁺ ions into Zn²⁺ sites within the ZnO crystal. In addition, higher silver incorporation resulted in smaller size for ZnO nanoparticles. The photocatalytic activity of the ZnO:Ag nanoparticles was also determined by methylene orange (MO) degradation studies and compared to that of undoped ZnO. Improved photocatalytic activity was obtained for ZnO:Ag nanoparticles. It has been shown that an optimum amount of silver dopant is required to obtain maximum photocatalytic activity.     

Development and Validation of an Artificial Mechanical Skin Model for the Study of Interactions between Skin and Microneedles

Microneedles are small needle‐like structures that are almost invisible to the naked eye. They have an immense potential to serve as a valuable tool in many medical applications, such as painless vaccination. Microneedles work by breaking through the stratum corneum, the outermost barrier layer of the skin, and providing a direct path for drug delivery into the skin. A lot of research has been presented over the past two decades on the applications of microneedles, yet the fundamental mechanism of how they interact, pressure, and penetrate the skin in its native state is worth examining further. As such, a major difficulty with understanding the mechanism of microneedle–skin interaction is the lack of an artificial mechanical human skin model to use as a standardized substrate. In this research news, the development of an artificial mechanical skin model based on a thorough mechanical study of fresh human and porcine skin samples is presented. The artificial mechanical skin model can be used to study the mechanical interactions between microneedles and skin, but not diffusion of molecules across skin. This model can assist in improving the performance of microneedles by enhancing the reproducibility of microneedle depth insertions for optimal drug delivery and biosensing.

     

Earthquakes and children: The role of psychologists with families and communities.

The 2008 Sichuan Province earthquake and 2005 Pakistan earthquake are examples of natural disasters that took an unimaginable toll on children. In such disaster management contexts, family members as well as health care and school personnel are the first-line responders and are natural sources of continued social support as children recover. Although psychologists have increasingly sophisticated understandings of post-disaster reactions and strategies for helping children and adolescents cope with trauma, models for responding to mass catastrophes are limited, particularly in geographically remote communities and in regions in which mental health services are stigmatizing. With children’s well-being subsequent to earthquakes inextricably linked to family and community, psychologists can make important contributions in 3 spheres: (a) coordinating and activating collaborations within children’s existing social contexts to develop post-earthquake interventions; (b) designing prevention and preparedness programs focused on the emotional needs of children in earthquake-prone communities; and (c) conducting research on interventions and recovery with particular attention to developmental stage, sociocultural-economic contexts, and the similarities versus differences across various types of disasters. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Synergistic corrosion inhibition effect of 1-ethyl-1-methylpyrrolidinium tetrafluoroborate and iodide ions for low carbon steel in HCl solution

Investigation into the corrosion inhibition of low carbon steel in 0.1-M HCl solution by 1-ethyl-1-methylpyrrolidinium (EMTFB) and the effect of KI addition on the inhibition efficiency was carried out using potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy and surface analysis (scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDAX)) techniques. Results show that EMTFB suppresses low carbon steel dissolution in the corrosive environment. Inhibition efficiency increased with the increase in EMTFB concentration. Addition of iodide ions to EMTFB raises inhibition efficiency from 75 to 98%. PDP results indicate that EMTFB affects majorly anodic reactions while EMTFB + KI act as cathodic-type inhibitor. The adsorption of EMTFB onto low carbon steel surface is by physical adsorption mechanism and follows Langmuir adsorption isotherm model. SEM and EDAX results confirm the adsorption of EMTFB alone and in combination with KI onto the steel surface.     

Evaluation of multiloop chemical dosage control strategies for total phosphorus removal of enhanced biological nutrient removal process

We developed several control algorithms and compare their control performances for controlling the total phosphorous (TP) concentration in wastewater treatment plant, which has strong influent disturbances and the disturbance effects should be removed while maintaining better effluent quality. An anaerobic - anoxic - oxic (AAO) process, which is a well-known advanced nutrient removal process, was selected as a case study, which is modeled with activated sludge model no. 2. Six control strategies for TP control with a polymer addition were implemented in AAO process and evaluated by the plant’s performance, where the costs of the dosed chemical were compared among the six controllers. The experimental work showed that the advanced control techniques with feedback, feedforward and feedratio controllers were able to control the TP concentration in the effluent, which must be less than 1.50 g P/m³ which is the legal limitation, while reducing the necessary chemical cost. The results showed that the best TP removal performance in the effluent TP removal could be achieved by advanced feedback controller with the tuned control parameters, which showed the best effluent quality and control performance index as well as the cheapest cost of chemical dosage among the six TP control strategies.