Improved homogenization of Ni in sintered steels through the use of Cr-containing prealloyed powders

The homogenization of Ni in powder metal (PM) steel compacts is usually difficult even after high-temperature sintering at 1250°C. An earlier study by the authors demonstrated that this problem can be alleviated through the addition of 0.5 wt pct Cr in the form of stainless steel powders. To further improve the microstructure and mechanical properties of Ni-containing PM steels and to understand the mechanisms, an attempt was made in this study using the Fe-3Cr-0.5Mo prealloyed powder as the base material. The results showed that the distribution of the Ni additives was significantly improved. As a result, the tensile strength of the Fe-3Cr-0.5Mo-4Ni-0.5C compact sintered at 1250°C reached 1323 MPa. The elongation was higher than 1 pct. These sinter-hardened properties, which were attained using a slow furnace cooling rate, were comparable to those of the sinter-hardened alloys reported in the literature using accelerated cooling and were equivalent to those of the best quenched-and-tempered alloys registered in the Metal Powder Industries Federation (MPIF) standards. These improvements were attributed to the positive effect of Cr addition on alloy homogenization due to the reduction of the repelling effect between Ni and C, as was demonstrated through the thermodynamic analysis using the Thermo-Calc program.     

A power-driven multiplication instruction-set design method for ASIPs

This paper presents a novel power-driven multiplication instruction-set design method for application-specific instruction-set processors (ASIPs). Based on a dual-and-configurable-multiplier structure, our proposed method devises a multiplication instruction set for low-power ASIPs. Our method exploits the execution sequences of multiplication instructions and effective bit widths of variables to reduce power consumed by redundant multiplication bits while minimizing the multiplication execution time. Experimental results on a set of DSP programs demonstrate that our proposed method achieves significant power reduction (up to 18.53%) and execution time improvement (up to 10.43%) with 18% area overhead.     

Optically preamplified receiver performance due to VSB filtering for 40-Gb/s optical signals modulated with various formats

Optically preamplified receiver performance according to the vestigial sideband (VSB) filtering has been numerically investigated for 40-Gb/s optical signals modulated with nonreturn-to-zero, duobinary nonreturn-to-zero (NRZ), return-to-zero (RZ), carrier-suppressed RZ, and duobinary carrier-suppressed RZ formats. The VSB filtering enables the spectral widths of NRZ, duobinary NRZ, and RZ signals to be reduced without severe power penalties at the receiver. On the other hand, carrier-suppressed RZ and duobinary carrier-suppressed RZ signals have no large advantages over VSB filtering because of the characteristics of their signals. Our results suggest that RZ signals are the most suitable modulation format for VSB filtering, without considering the filter loss, because of the tolerance of the intersymbol interference and a large spectral width. However, duobinary NRZ signals are the most suitable modulation format for VSB filtering, considering the filter loss, because of their narrow spectral width.     

Improved Yen-Joye's authenticated multiple-key agreement protocol

An authenticated multiple-key agreement protocol is proposed. The protocol is not only secure against the unknown-key attack but also more efficient than other protocols.     

The effect of topical corticosteroids on refractive outcome and corneal haze after photorefractive keratectomy

BACKGROUND: The effect of topical corticosteroids after excimer laser photorefractive keratectomy (PRK) remains a matter of some controversy. Refractive effects may be different according to the amount of myopia and timing of instillation. METHODS: Two groups of patients were studied: Study A consisted of 215 eyes (128 patients) with PRK (mean baseline myopia, -6.53 +/- 2.22 D) that received no corticosteroids (No Corticosteroid Group) unless significant regression or corneal haze appeared (Delayed Corticosteroid Group), and in Study B, we randomly assigned eyes to the Initial Corticosteroid Group (mean baseline myopia, -6.39 +/- 1.84 D) or the No/delayed Corticosteroid Group (mean baseline myopia -5.78 +/- 2.02 D). Clinical results after PRK for low-to-moderate and high myopia were compared. RESULTS: In the first group, 70.9% (73 eyes) of moderately myopic eyes (mean, -4.56 +/- 1.10 D) belonged to the No Corticosteroid Group that had a mean refraction of -5.39 +/- 1.77 D. Delayed Corticosteroid Group eyes were more myopic (mean, -7.52 +/- 2.10 D), and showed more severe haze than those in the No Corticosteroid Group. In study B, only in high myopes with more than -6.00 D (mean, -7.76 +/- 1.15 D) did refraction and corneal haze outcomes show significant difference between the Initial Corticosteroid Group and the No/delayed Corticosteroid Group. CONCLUSIONS: The effects of topical corticosteroids after PRK were less in moderate myopes compared to high myopes. Delayed instillation of corticosteroids did not reverse the regression or haze whereas initial instillation showed a beneficial effect on high myopes but not on moderate myopes.     

Longitudinal weight changes, length of survival, and energy requirements of long-term care residents with dementia

OBJECTIVE: We hypothesized that institutionalized patients with dementia, who frequently have feeding problems and require supervised and assisted feeding, would lose more weight during their residency than nondemented, independently functioning residents and have compromised survival. To test this hypothesis, we examined the survival and longitudinal changes in weight of two cohorts of institutionalized residents with dementia and compared these cohorts with a cohort of nondemented residents. We also measured the resting energy expenditures of a subset of the subjects with dementia as an indicator of their energy needs. DESIGN: A longitudinal cohort study with retrospective baseline chart review and subsequent follow-up of monthly weights and mortality over 4 years. SETTING: A 725-bed long-term care institution with specified levels of care. SUBJECTS: Two cohorts of residents with dementia, one consisting of subjects who required total care throughout their institutional stay (n = 31) and another group who did not initially require total care (n = 48); these were compared with a cohort with normal mentation who were functionally independent in their daily activities (n = 26). The total number of subjects was 105. MEASUREMENTS: Demographics, medical problems, and medications by chart review; functional and mental status evaluations; longitudinal monthly weights and mortality for the 48-month study period; and resting energy expenditures by indirect calorimetry. MAIN RESULTS: Residents with dementia had lower weights on admission and throughout their stay than nondemented, independently functioning residents, and they were more likely to have a weight loss of 10 lbs or more at some point during the 4-year study period. However, their mean weights did not change during the study period. The mean survival from admission of those demented residents who died was more than 3 years. Resting energy expenditures of women residents with advanced dementia were 12% lower than predicted from the Harris Benedict equations. CONCLUSION: Dementia is not necessarily associated with unremitting weight loss during institutionalization despite the frequent occurrence of feeding difficulties and temporary weight loss. This may be caused partly by the lower than expected resting energy expenditures and, hence, energy needs of affected residents as their dementia progresses. Demented residents weighed significantly less than nondemented, independently functioning residents throughout their institutional stay. Nevertheless, nursing staff are able to maintain weight and survival for extended periods even in very impaired residents.     

Effects of contact shape on biological wet adhesion

Wet adhesion is widely adopted in biological adhesion systems in nature. Wet adhesion is studied in this paper with the focus on the effect of different contact shapes (flat, concave, convex, and ring-like) on the adhesion force. The evolution of the liquid bridge between a fiber tip and substrate during the detaching process shows two transition points. The first transition from the radius-controlled to the contact-angle controlled process is critical to influence the strength and robustness of adhesion. We show that a concave shape is more effective than a flat one, while a convex shape has no advantage. A ring-like contact shape has advantages in a hydrophobic environment and on a rough surface.     

Mode Matching Analysis of a Tapered Coaxial Tip in a Parallel-Plate Waveguide

A tapered coaxial tip in a parallel plate waveguide is investigated. A boundary-value problem of electromagnetic scattering from a tapered coaxial monopole is solved rigorously based on the Fourier transform, eigenfunction expansion, and mode matching. Scattering parameters are represented in a series and computed to understand the behavior of the scattering in terms of the coaxial tip geometry.     

Optimal and reinforced robustness designs of fuzzy variable structure tracking control for a piezoelectric actuator system

In this paper, a piezoelectric actuator (PEA) system is approximated by N subsystems, which are described by pulse transfer functions. The approximation error between the PEA system and the fuzzy linear pulse transfer function system is represented by additive nonlinear time-varying uncertainties in every subsystem. First, a dead-beat to the switching surface for every ideal subsystem is designed. It is called the "variable structure tracking control". The output disturbance of the ith subsystem is caused by the approximation error of fuzzy-model and the interaction dynamics resulting from other subsystems. In general, it is not small. Then, the H/sup /spl infin//-norm of the sensitivity function between the switching surface and the output disturbance is minimized. It is the "optimal robustness". Although the effect of the output disturbance is attenuated, a better performance can be reinforced by a switching control which is based on the Lyapunov redesign. This is the final step for the robustness design of control, which is "reinforced robustness". The stability of the overall system is verified by Lyapunov stability theory. Experimental work of a PEA system was carried out to confirm the validity of the proposed control.