Oxidation of doped europium in BaMgAl10O17 by annealing studied by x‐ray‐absorption fine‐structure measurements

Abstract— We studied the influence of annealing in air on doped europium in BaMgAl₁₀O₁₇ by performing x‐ray absorption fine‐structure measurements. We determined the oxidation of doped divalent europium by annealing in air at over 500°C. The interatomic distance between the europium and the surrounding oxygen atoms was compressed by oxidation. It also appears that the oxidation process of europium is determined by the diffusion of oxygen into BaMgAl₁₀O₁₇.     

Photoinduced Formation of Small Gold Particles in Silica Gels

AuCl⁻₄ ions in sol-gel-derived silica gels (Au/silica gels) were photoreduced by ultraviolet light irradiation at room temperature. In the presence of ethylene glycol in the silica gels, small Au particles were effectively formed by the irradiation. When the storage temperature of the gels was increased in the dark after the irradiation, the surface plas-mon resonance absorption peak of the Au particles was shifted to longer wavelengths, indicating that the Au particles became large. At a storage temperature below 9°C, Au particles could not be observed in the silica gels. The apparent activation energy of Au particle formation was estimated to be 17. 3 kcal·tmol⁻¹.     

2D Image Construction from Low Resolution Response of a New Non‐invasive Measurement for Medical Application

This paper presents an application of digital signal processing to data acquired by the radio imaging method (RIM) that was adopted to measure moisture distribution inside the human body. RIM was originally developed for the mining industry; we are applying the method to a biomedical measurement because of its simplicity, economy, and safety. When a two‐dimensional image was constructed from the measured data, the method provided insufficient resolution because the wavelength of the measurement medium, a weak electromagnetic wave in a VHF band, was longer than human tissues. We built and measured a phantom, a model simulating the human body, consisting of two water tanks representing large internal organs. A digital equalizer was applied to the measured values as a weight function, and images were reconstructed that corresponded to the original shape of the two water tanks. As a result, a two‐dimensional image containing two individual peaks corresponding to the original two small water tanks was constructed. The result suggests the method was applicable to biomedical measurement by the assistance of digital signal processing. This technique may be applicable to home‐based medical care and other situations in which safety, simplicity, and economy are important.     

A 10-s doping technology for the application of low-temperaturepolysilicon TFTs to giant microelectronics

A bucket-type high-density (0.25-1.2-mA/cm²) low-energy (500-2000 V) ion source was utilized for high-speed phosphorus doping directly into a thin polysilicon layer without cap SiO₂. Doping gas with He dilution was selected to reduce etching of polysilicon film. Excimer laser (XeCl, 8 mm×8 mm) pulse annealing was introduced to activate effectively the doped impurity. The combination of these techniques provided a practically low sheet resistance for the TFT source, drain, and gate with a short time doping. The low-temperature polysilicon TFT fabricated with a doping time of 10 s had characteristics comparable to those of that fabricated by a longer time doping or conventional ion implantation, showing the practicality of this technology and its promise for giant microelectronics     

Formation of uniform GaAs multi-atomic steps with 20–30 nm periodicity and related structures on vicinal (111)B planes by MBE

We studied morphology of GaAs surfaces and the transport properties of two-dimensional electron gas (2DEG) on vicinal (111)B planes. Multi-atomic steps (MASs) are found on the vicinal (111)B facet grown by molecular beam epitaxy, which will affect electron transport on the facet. We also studied how the morphology of GaAs epilayers on vicinal (111)B substrates depends on growth conditions, especially on the As₄ flux. The uniformity of MASs on the substrates have been improved and smooth surfaces were obtained when the GaAs was grown with high As₄ flux, providing step periodicity of 20 nm. The channel resistance of the 2DEG perpendicular to the MASs is reduced drastically with this smooth morphology. These findings are valuable not only for fabricating quantum devices on the (111)B facets but also those on the vicinal (111)B substrates.     

Changes in Aging Behavior and Defect Structure of Yttria-Fully-Stabilized ZrO2 with Sc2O3 Doping

Methods of suppressing decreased conductivity in 8 mol% Y₂O₃-stabilized–92 mol% ZrO₂ (8YSZ) with aging were investigated. Different amounts of Sc₂O₃ were doped into 8YSZ. The electrochemical properties of Sc₂O₃-doped 8YSZ were measured, and the microstructural and local structural changes were characterized. The present results indicate that an appropriate amount of Sc₂O₃ doping, 3 or 4 mol%, effectively suppresses decreased conductivity with aging in 8YSZ.     

Interface potential of calcium phosphate in simulated body fluid

Calcium phosphate ceramics are used in the substitution of injured or damaged bones. Nevertheless, the behaviour of these materials, and in particular, the mechanisms guiding their interface response in physiological environment is still unknown. This work describes the construction of hydroxyapatite and tricalcium phosphate electrodes used to determine the interface potential behaviour of these materials in a simulated body fluid, in a pH range corresponding to the variation observed in human body injuries, at ambient and physiological temperatures. These measurements are associated with the adsorption/desorption of ions from the materials. The results show that hydroxyapatite and tricalcium phosphate have similar behaviour in that they reach an interface potential equilibrium state faster when the solution pH is decreased and the temperature increased. This behaviour may be attributed to their ability to form a calcium-rich layer and is relevant to their quality as implantable materials.     

Distance metric learning for graph structured data

Machine Learning - Graphs are versatile tools for representing structured data. As a result, a variety of machine learning methods have been studied for graph data analysis. Although many such...