Processabilities and mechanical properties of surlyn-treated starch/LDPE blends

The esterification of the hydroxyl group of starch with DuPont Surlyn was considered as pretreatment method of starch before blending with polyolefins. In treating starch with Surlyn, two different raction conditions were taken to optimize reaction conditions. First, the esterification reaction was carried out in 110°C xylene with oleic acid as a catalyst. Second, the reaction out in a 90°C mixture of deionized water and xylene with ceric ammonium nitrate(CAN) as an initiator. Starch granules would be swollen above the gelatinization temperature in water. In both cases starch was midified by Surlyn to have good compatibility with low-density polyethylene (LDPE). The mechanical and theological properties were examined for blends of the treated starch and LDPE. This system may be one of the biodegradable polymer blends that sufficiently retain properties as a packaging film.     

Control of NO x emissions from diesel engine by selective catalytic reduction (SCR) with urea

Topics in Catalysis - Among the catalysts screened, Cu-ion exchanged ZSM5 zeolite exhibited the highest NO removal activity, particularly at low reaction temperatures below 200 °C,...     

Characterization of dilute and dense phase vertical upflow gas-solid transport based on average concentration and velocity data

Dilute, ‘dense phase 1’, and possibly a third regime-‘dense phase 2’, were observed in a vertical 0.02 m diameter pneumatic conveyor using 210 μm sand particles. The transitions were marked by the alterations in the trend of the measured average solids hold-up while varying the solids mass flowrate at constant air velocity. Hydrodynamic characteristics together with the transition criteria for the various transport modes were established. A novel regime diagram based on average gas velocities and solids mass flowrates was developed to identify the operating conditions for these regimes, as well as the limiting solids carrying capacities of the present conveyor. A probable cause of the dilute to dense phase transition is speculated upon.     

Surface modification of polyethersulfone hollow-fiber membranes by γ-ray irradiation

The fouling of ultrafiltration membrane is often caused by gel formation on the membrane surface. This gel layer arises due to concentration polarization or macromolecular adsorption on the membrane surface. The gel layer affects both the hydraulic permeability and the rejection properties of the membrane. In this report, the adsorption of porcine albumin and the concentration polarization effect on modified and unmodified polyethersulfone (PES) hollow-fiber membrane is studied. PES ultrafiltration hollow-fiber membranes were modified by the grafting of polyethylene glycol (PEG) polymer on the internal surface using γ-ray irradiation method. The modified hollow fibers were less susceptible to fouling than were the unmodified fiber. The performance of both modified and unmodified hollow fibers was tested as a function of feed flow rates and protein concentrations. © 1994 John Wiley & Sons, Inc.     

Sodium molybdate—a possible alternate additive for sodium dichromate in the electrolytic production of sodium chlorate

Sodium dichromate is commonly used in sodium chlorate production to maintain high current efficiency; however, it is also a well documented carcinogen. To reduce the environmental impact, identification of a suitable alternative with similar buffering characteristics to dichromate and without adverse effect on the electrolytic performance of sodium chlorate production is important; sodium molybdate is a good candidate. Molybdate ion and its conjugated acid work as a buffer pair at pH 5–6, a lower and slightly narrower pH window than the typical buffer region of dichromate. Nonetheless, the molybdate buffer works effectively during the electrolytic process by maintaining pH at 5.9. Although the use of molybdate buffer will lower the overpotential of hydrogen evolution reaction (HER) by 100 mV, the average off-gas oxygen content is noticeably compromised at 3.6–4.6%, measured using a pilot cell operated at 3 kA m⁻²and 80 °C during a 3-day trial. The resulting current efficiency of 91 92% is significantly lower than when dichromate is employed as the process additive (> 96%). Mixtures of different dichromate and molybdate ratio were also investigated in terms of the resulting cathode surface potential.     

Degradation of a textile azo dye by pulsed arc discharge to the surface of wastewater

The pulsed arc discharge to the surface of wastewater was applied to the degradation of a textile azo dye (Acid Red 27). A high-voltage electrode (discharging electrode) was vertically placed above the surface of the wastewater while the wastewater itself was grounded. The pulsed arc discharge occurred between the tip of the discharging electrode and the surface of the wastewater, producing various oxidative species. Oxygen was used as the working gas instead of air to prevent nitrogen oxides from forming. The effect of several parameters on the chromaticity and chemical oxygen demand (COD) removal was examined. The results obtained showed that the chromaticity of the wastewater was completely removed by this process and the COD also decreased significantly. It has been found that ozone formed in the gas phase mainly affects the removal of the dye. The contribution of other effects such as ultraviolet light emission and OH radical formation during the arc discharge to the degradation of the dye was found to be less than 15%. For the present reactor system, the optimum pH, pulse repetition rate and agitation speed were found to be 3.0, 110 Hz and 300 rpm, respectively.     

Forward kinematic singularity avoiding design of a Schönflies motion generator by asymmetric attachment of subchains

In most of the previous studies on parallel mechanisms (PMs), architectural design mainly relying on symmetric geometry was investigated without in-depth analysis of its performance. This work demonstrates that such a symmetric geometry of multiple subchains sometimes induces a forward kinematic singularity which degrades the overall kinematic performance of PMs within the desired workspace and claims that an asymmetric attachment of those subchains on a moving platform can effectively resolve such a singularity problem. A 4-Degree-of-Freedom (DOF) PM exhibiting Schönflies motions is examined as an example device. First, its mobility analysis and kinematic modeling via screw theory are conducted. Then a singularity analysis based on Grassmann line geometric conditions is carried out, and the forward kinematic singularities of the mechanism are identified and verified by simulations. Based on these analysis and simulations, a forward kinematic singularity-free design is suggested. To show the high potential of the device in practical applications, its output stiffness and dynamic motion capability are examined. Then a prototype is built and its motions capability is verified through experiments.     

Auto-generation of IEC standard PLC code using t-MPSG

The objective of this paper is to reduce the development time of a PLC (Programmable Logic Controller) by automating the task of code generation. For this purpose, we applied t-MPSG (Timed-Message Based Part State Graph). The t-MPSG is an extended finite state automata used to model and generate an execution module for a real-time shop floor controller system. In our proposed method, t-MPSG is used to model the formal specification of the controller system that can be translated into textual structure. After the verification of the t-MPSG model, it can be used as an input to the plc-builder tool. The plc-builder tool is an extended version of a conventional MPSG simulator. It can be used to translate the textual structure of the t-MPSG into an IEC standard PLC code. Finally, the generated code can be downloaded to a PLC emulator or a PLC device for the purpose of simulation and execution. The similarity in the hierarchical structure of the t-MPSG and the IEC standard PLC program has made it convenient to transform from one form to another. Furthermore, an illustration of the methodology to auto-generate IEC standard PLC code using t-MPSG is explained with a suitable example. Recommended by Editorial Board member Young Soo Suh under the direction of Editor Jae Weon Choi. This work was partially supported by Defense Acquisition Program Administration and Agency for Defense Development under the contract (UD080042AD). Devinder Thapa is a Postdoc Research Fellow in the Department of Industrial & information systems at Ajou University, Korea. He completed his Ph.D. from Ajou University in Industrial and Information Systems Engineering. His area of research is related to manufacturing automation and intelligent decision support systems. Chang Mok Park is a Professor in the Department of Technology & Systems Management at Induk Institute of Technology. He completed his Ph.D. in 2002 from Ajou University in Industrial Engineering. His research interest is related to manufacturing optimization, discrete event system simulation and signal analysis. Sang C. Park is an Associate Professor in the Department of Industrial & Information Systems Engineering at Ajou University. He received his B.S., M.S., and Ph.D. degrees from KAIST in 1994, 1996, and 2000, respectively, all in Industrial Engineering. His research interests include geometric algorithms in CAD/CAM, process planning, engineering knowledge management, and discrete event system simulation. Gi-Nam Wang is the Head and a Professor in the Department of Industrial & Information Systems Engineering at Ajou University, Korea. He completed his Ph.D. in 1992 from Texas A&M University, in Industrial Engineering. He has worked as Visiting Professor at University of Texas at Austin during 2000–2001. His area of research is related to Intelligent Information & manufacturing systems, system integration & automation, e-Business solutions and image processing.     

Application of virtual reality for peritoneal dialysis exchange learning in patients with end-stage renal disease and cognitive impairment

Virtual Reality - Cognitive impairment is not uncommon in patients with end-stage renal disease and can make it more difficult for these patients to carry out peritoneal dialysis (PD) on their own....     

Extracting a largest redundancy-free XML storage structure from an acyclic hypergraph in polynomial time

Given a hypergraph and a set of embedded functional dependencies, we investigate the problem of determining the conditions under which we can efficiently generate redundancy-free XML storage structures with as few scheme trees as possible. Redundancy-free XML structures guarantee both economy in storage space and the absence of update anomalies, and having the least number of scheme trees requires the fewest number of joins to navigate among the data elements. We know that the general problem is intractable. The problem may still be intractable even when the hypergraph is acyclic and each hyperedge is in Boyce–Codd normal form (BCNF). As we show here, however, given an acyclic hypergraph with each hyperedge in BCNF, a polynomial-time algorithm exists that generates a largest possible redundancy-free XML storage structure. Successively generating largest possible scheme trees from among hyperedges not already included in generated scheme trees constitutes a reasonable heuristic for finding the fewest possible scheme trees. For many practical cases, this heuristic finds the set of redundancy-free XML storage structures with the fewest number of scheme trees. In addition to a correctness proof and a complexity analysis showing that the algorithm is polynomial, we also give experimental results over randomly generated but appropriately constrained hypergraphs showing empirically that the algorithm is indeed polynomial.