Method for HDR-like imaging using industrial digital cameras

Dynamic range of the scene can be significantly wider than the dynamic range of an image because of limitations of A/D conversion. In such a situation, numerous details of the scene cannot be adequately shown on the image. Standard industrial digital cameras are equipped with an auto-exposure function that automatically sets both the aperture value and cameras exposure time. When measuring a scene with atypical distribution of light and dark elements, the indicated auto-exposure time may not be optimal. The aim of work was to improve, with minimal cost, the performance of standard industrial digital cameras. We propose a low complexity method for creating HDR-like image using three images captured with different exposure times. The proposed method consists of three algorithms: (1) algorithm for estimating whether the auto-exposure time is optimal, (2) algorithm which determines exposure times for two additional images (one with shorter and another with longer than auto-exposure time), and (3) algorithm for HDR-like imaging based on fusion of three previously obtained images. Method is implemented on FPGA inserted into standard industrial digital camera. Results show that the proposed approach produces high quality HDR-like scene-mapped 8-bit images with minimal computational cost. All improvements may be noticed through the performance evaluation.

     

The compressibility and compactibility of different types of lactose

Objective: The purpose of this study was to investigate and quantify flow properties, compressibility, and compactibility of various pharmaceutical lactose powders found on the market today (DCL-11, DCL-21, M‐200, Flowlac-100, and Tablettose 70, 80, and 100). Methods: Flow properties were estimated by measuring flow time, angle of repose, and the Hausner ratio. Particle rearrangement was studied using Kawakita's linear model. Compressibility was studied using two ‘out-of-die’ methods: (i) the Heckel model and (ii) a modified Walker model. Compactibility was quantified using two methods: (i) the tensile strength profile (Cp) and (ii) the compactibility factor (Pr). Statistical approach was used to analyze the results. Results: Flow properties of all materials were passable or better, except for M-200, which has very poor flowability. Compressibility results demonstrated that the most compressible lactose is spray-dried grade of lactose (Flowlac-100) and the least compressible is milled lactose (M-200). Compactibility studies showed that β‐lactose (DCL-21) forms tablets with superior tensile strength in comparison with α-lactose. Conclusion: Results of the compressibility study showed that the discriminative power of modified Walker model is greater in comparison with Heckel model. Compactibility methods yield similar and comparable results.     

Discovery of interactive graphs for understanding and searching time-indexed corpora

Rich information spaces (like the Web or scientific publications) are full of “stories”: sets of statements that evolve over time, manifested as, for example, collections of news articles reporting events that relate to an evolving crime investigation, sets of news articles and blog posts accompanying the development of a political election campaign, or sequences of scientific papers on a topic. In this paper, we formulate the problem of discovering such stories as Evolutionary Theme Pattern Discovery, Summary and Exploration (ETP3). We propose a method and a visualisation tool for solving ETP3 by understanding, searching and interacting with such stories and their underlying documents. In contrast to existing approaches, our method concentrates on relational information and on local patterns rather than on the occurrence of individual concepts and global models. In addition, it relies on interactive graphs rather than natural language as the abstracted story representations. Furthermore, we present an evaluation framework. Two real-life case studies are used to illustrate and evaluate the method and tool.     

Die Abweichungsfläche bei Schnellregelvorgängen Beitrag zur Theorie der Schnellregelung

Zusammenfassung Die Berechnung der Fläche wurde angegeben, die die Lösung einer homogenen linearen Differentialgleichung beliebiger Ordnung, die eine stabile Bewegung darstellt, im Zeitintervale vont=0 bist= umschreibt. Danach ist an zwei behandelten Beispielen, die meistens bei der Schnellregelung vorkommen, gezeigt, wie diese Fläche nach einer sehr einfachen Gleichung zu bestimmen ist. Durch Vergleich der oszillographisch aufgenommenen Abweichungsflächen eines in Betrieb befindlichen Reglers kann man entweder einige Konstanten der Regelung ermitteln oder eine Rechnungskontrolle durchführen. Die Fläche kann weiterhin als ein Hilfsbegriff zu den theoretischen Untersuchungen auf dem Gebiete der Schnellregelung von Nutzen sein.     

Melt granulation in fluidized bed: a comparative study of spray-on versus in situ procedure

Objective: The aim of this study was to investigate the influence of process parameters, binder content and binder addition method on characteristics of the granules obtained by melt granulation (MG) in fluidized bed.

Methods: Spray-on experiments were performed according to 2³ full factorial design. The effect of binder content, molten binder feed rate, and spray air pressure on granule size and size distribution, granule shape, ?owability and drug release rate was investigated. In the in situ experiments, the influence of binder particle size and binder content was evaluated. Solid-state characterization was performed by means of differential scanning calorimetry, X-ray powder diffraction and Fourier transform infrared spectroscopy.

Results: Size of the granules obtained by spray-on procedure was significantly influenced by binder content and spray air pressure, while the width of particle size distribution was mainly affected by binder feed rate. Spray air pressure showed the most significant influence on granule shape. It was shown that smooth and spherical particles with good flow properties may be obtained by both procedures, spray-on and in situ MG. The results obtained indicated the influence of agglomeration mechanism on granule sphericity, with higher degree of granule sphericity observed when immersion and layering was the dominant mechanism. Paracetamol release from granulates was very rapid, but after compression of the granules into tablets, drug release was considerably slower. Solid-state analysis confirmed that the physical form of the granulate components remained unaffected after the MG process.

Conclusion: The results presented indicate that MG in fluidized bed could be a good alternative to conventional granulation techniques.     

Direct preparation of ionic potassium—coal adducts

The possibility for a direct preparation of ionic potassium—coal adduct is shown, from finely ground low-volatile bituminous coal (89.2% C) and metallic potassium with stirring at 120 °C and a vacuum of 13 mPa. The treatment of the adduct dispersed in THF with CH₃l results in reductive methylation of the coal, similar to that of the ‘coal anion’, obtained in THF during its interaction with potassium—naphthalene.     

Wear Behavior of Composites Based on ZA-27 Alloy Reinforced by Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Particles Under Dry Sliding Condition

In present study, the effect of Al₂O₃ particle reinforcement on the sliding behavior of ZA-27 alloy composites was investigated. The composites with 3, 5, and 10 wt% of Al₂O₃ particles were produced by the compocasting procedure. Tribological properties of unreinforced alloy and composite were studied, using block-on-disk tribometer under unlubricated sliding conditions at different specific loads and sliding speeds. The worn surfaces of samples were examined by the scanning electron microscopy (SEM). The test results revealed that those composite specimens exhibited significantly lower wear rate than the ZA-27 matrix alloy specimens in all combinations of applied loads and sliding speeds. The difference in the wear resistance of composite with respect to the matrix alloy, increased with the increase of the applied load/sliding speed and Al₂O₃ particle content. The highest degree of improvement of the ZA-27 alloy tribological behavior corresponded with change of the Al₂O₃ particles content from 3 to 5 wt%. At low sliding speed, moderate lower wear rate of the composites over that of the matrix alloy was noticed. This has been attributed to micro cracking tendency of the composites. Significantly reduced wear rate, experienced by the composite over that of the matrix alloy at the higher sliding speeds and loads, could be explained due to enhanced compatibility of matrix alloy with dispersoid phase and greater thermal stability of the composite in view of the presence of the dispersoid. Level of wear rate of tested ZA-27/Al₂O₃ samples pointed to the process of mild wear, which was primarily controlled by the formation and destruction of mechanical mixed layers (MMLs).