Loss modeling and thermal measurement in planar inductors-a case study

This paper covers the experimental investigation and theoretical calculation of losses in a planar inductor under load. Finite-element software is used to perform the loss calculations. Thermally controlled experiments are performed for a range of frequencies to validate the corresponding finite-element method loss calculations. The thermal dependence of the loss mechanisms is also considered.     

Electrophilic chlorination of methane over superacidic sulfated zirconia

Catalytic chlorination of methane was studied over SO ₄ ^2– /ZrO₂, Pt/SO ₄ ^2– /ZrO₂, and Fe/Mn/SO ₄ ^2– /ZrO₂ solid superacid catalysts. The reactions were carried out in a continuous flow reactor under atmospheric pressure, at temperatures below 240°C, with a gaseous hourly space velocity of 1000 ml/g h and a methane to chlorine ratio of 4 to 1. At 200°C with 30% chlorine converted the selectivity in methyl chloride exceeds 90%. At more elevated temperatures, the selectivity decreases but stays above 80% in methyl chloride at 225°C using the sulfated zirconia catalysts. The selectivity can be enhanced by adding platinum to sulfated zirconia catalysts. An iron and manganese-doped catalyst exhibited excellent selectivities at somewhat lower conversions. Methyl chloride is obtained at 235°C in selectivities greater than 85%. No chloroform or carbon tetrachloride is formed. The electrophilic insertion involves electron-deficient metal-coordinated chlorine into the methane C-H bond.Catalysis by solid superacids, 29. For part 28 see ref. [14].     

Electrodeposition and dissolution of yttrium-hexacyanoferrate layers

The electrodeposition and dissolution of yttrium-hexacyanoferrate [YHCNFe(II)] were investigated by electrochemical quartz crystal microbalance technique (EQCM). The electrodeposition was carried out by potential cycling or stepping from solutions of Y(NO₃)₃ and K₃[Fe^III(CN)₆] of different concentrations. The ratio of the reactants was also varied. No deposition was found in dilute solutions (c < 10⁻³ mol dm⁻³). The increase of concentrations led to an intense deposition of YHCNFe(II) in the course of reduction of [Fe^III(CN)₆]³⁻. At high concentrations of the reactants a coagulation deposition of YHCNFe(III) at open-circuit has also been detected. During the reduction the first phase is the nucleation which requires saturation or oversaturation in respect to the reacting species near the gold surface. The growth phase is much faster than the formation of nuclei, and its rate depends on the concentration and the concentration ratio of the species. The composition of the deposits has been determined by total reflection X-ray fluorescence (TXRF) spectrometry. From the molar ratio of atomic constituents (K, Y and Fe) of the slightly soluble deposit (solubility: 5 × 10⁻⁵ mol dm⁻³) formed after reduction of Fe(III) a formula K_0.46Y_1.18[Fe^II(CN)₆] can be derived. This value is in good accordance with the molar mass calculated from the results of EQCM experiments which also revealed that the deposit contains ca. 2 mol H₂O/mol YHCNFe(II). The solubility of YHCNFe(III) is substantially higher (s = 2 × 10⁻³ mol dm⁻³), and according to the results of TXRF measurements, its composition is Y[Fe^III(CN)₆]. The reoxidation of YHCNFe(II) takes place in two steps. The first one is a partial oxidation which is accompanied by the desorption of K⁺ ions from the layer. During further oxidation a fast dissolution occurs due to the high solubility of YHCNFe(III).     

Living carbocationic polymerization

Summary Living carbocationic polymerization of styrene (St) has been achieved by the use of the 1(p-methylphenyl)ethyl acetate (pMePhEtOAc)·BCl₃ complex in CH₃Cl solvent at –30°C using both the IMA and AMI techniques. The living nature of the polymerizations has been demonstrated by linear M_n versus W_PSt (weight of polystyrene) plots passing through the origin and horizontal N (moles of PSt) versus W_PSt plots starting at N=I_o (the number of moles of initiator used). The molecular weight distribution MWD of the PSts is broad (M_w/M_n=~5–6) due to slow initiation and/or slow exchange between dormant and active species relative to propagation. The structure of the ester initiator strongly affects the rate and outcome of living polymerization, e.g., cumyl acetate (CumOAc), cumyl propionate (CumOPr), and 2,4,6-trimethylphenylethyl acetate (TMePhEtOAc), do not lead to truly living St polymerizations. The findings with the latter esters is explained in terms of a two path process comprising a slow living polymerization and a faster conventional cationic chain reaction. With phenylethyl acetate (PhEtOAc) living polymerization is achieved, however, initiation (cation generation) is slow. Forced termination by pyridine or methanol, or heating to ambient temperature leads to-CH₂CH(C₆H₅)Cl end groups.     

The ring transformations of 1,2,3,4-diepoxybutane (2,2′-bioxirane) catalysed by various aluminosilicates

The transformations of a molecule containing two adjacent epoxide rings, 2,2-bioxirane that is, were studied over various acidic aluminosilicates (HZSM-5, HY-FAU, AlMCM-41), for the first time, In the 373–473 K temperature range, in a pulse reactor, a ring-opening–ring-enlargment reaction producing furan only occured over the zeolites and it was the predominant reaction on AlMCM-41 as well. The driving force of this transformation route is water formation via elimination from 2,2-bioxirane. Suprising is the lack of the mono- or dialdehyde, the would-be products of the cleavage of the sterically more hindered C–O bonds – an acid-catalysed reaction typical for alkyl-substituted oxiranes.     

Optimal conditions for mycelial growth of Schizosaccharomyces japonicus cells in liquid medium: it enables the molecular investigation of dimorphism

The non‐pathogenic dimorphic fission yeast, Schizosaccharomyces japonicus, could be a suitable model organism for investigation of the genetic background of mycelial growth, as it has a haploid chromosome set and its genome is sequenced. Since earlier results have suggested that its morphological transition required solid substrates, but molecular biological experiments would require hyphae production in a liquid medium, we wanted to find circumstances which would enable hyphae production in liquid media. Several external conditions were investigated, but the strongest inducer was fetal bovine serum (FBS). Its positive effect could be hampered by heat and was dependent on pH, temperature and concentration of the serum. Other protein‐containing compounds, such as peptone and bovine serum albumin or amino acids, proved to be ineffective or weak. Generally, the uninduced and induced mycelial growth of Sz. japonicus could be improved by lower external pH and higher temperature. Copyright © 2014 John Wiley & Sons, Ltd.     

Shape memory crosslinked polyurethanes containing thermoreversible Diels‐Alder couplings

Crosslinked polyurethanes (PUs) containing irreversible (allophanate) and reversible Diels‐Alder chemical bonds were synthesized using various diisocyanates (methylene diphenyl diisocyanate MDI, 1,6‐hexamethylenediisocyanate HDI) and poly(?‐caprolactone) ((PCL) with different molecular weights (M_n = 10 kg/mol, 25 kg/mol, 50 kg/mol) as diol component. The melting/crystallization of PCL and the reversible DA bonds acted as temperature‐activated switches for shape memory performances, while allophanate network provided the permanent crosslinks for these PUs. The reversible DA bonds were obtained by the reaction of diisocyanate‐ended prepolymers with furfurylamine (FA) followed by the addition of bismaleimide (BMI). The permanent crosslinks between the linear chains containing DA bonds were achieved using additional amounts of diisocyanates (MDI or HDI). The above reaction path was supported by infrared spectroscopic results and swelling experiments. Tensile mechanical and shape memory properties in tension of the PUs were determined and discussed as a function of composition and crosslink densities deduced from swelling and dynamic mechanical analysis. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44145.