Measurements of small-scale fading and path loss for long range RF tags

RF modulated backscatter (RFMB), also known as modulated radar cross section or sigma modulation, is a RF transmission technique useful for short-range, low-data-rate applications, such as nonstop toll collection, electronic shelf tags, freight container identification and chassis identification in automobile manufacturing, that are constrained to have extremely low power requirements. The small-scale fading observed on the backscattered signal has deeper fades than the signal from a traditional one-way link of the same range in the same environment because the fading on the backscattered signal is the product of the fading on the off-board-generated carrier times the fading on the reflected signal. This paper considers the continuous wave (CW) type of RFMB, in which the interrogator transmitter and receiver antennas are different. This two-way link also doubles the path loss exponent of the one-way link. This paper presents the cumulative distribution functions for the measured small-scale fading and the measured path loss for short ranges in an indoor environment at 2.4 GHz over this type of link.     

Hydrolysis of 4-methylumbelliferyl butyrate: A convenient and sensitive fluorescent assay for lipase activity

A rapid, sensitive and convenient fluorescent assay was developed to screen for lipase activity. The non-fluorescent substrate, 4-methylumbelliferyl butyrate (4-MUB), solubilized in either liposomal dispersions or bile salt/lecithin mixed micelles, is hydrolyzed to butyric acid and the highly fluorescent compound, 4-methylumbelliferone (4-MU). Assays are run at 37 C for 10 min, terminated, and the changes in fluorescence quantitated with a Turner III fluorometer. Both lingual and pancreatic lipases exhibit activity against this artificial substrate. The assay has several advantages: nmoles 4 MU/ml/hr are measured allowing the detection of very low lipolytic activity; multiple samples may be simultaneously assayed, and only a brief incubation period is required.     

Medium access control in ad hoc networks with MIMO links: optimization considerations and algorithms

we present a medium access control (MAC) protocol for ad hoc networks with multiple input multiple output (MIMO) links. MIMO links provide extremely high spectral efficiencies in multipath channels by simultaneously transmitting multiple independent data streams in the same channel. MAC protocols have been proposed in related work for ad hoc networks with other classes of smart antennas such as switched beam antennas. However, as we substantiate in the paper, the unique characteristics of MIMO links coupled with several key optimization considerations, necessitate an entirely new MAC protocol. We identify several advantages of MIMO links, and discuss key optimization considerations that can help in realizing an effective MAC protocol for such an environment. We present a centralized algorithm called stream-controlled medium access (SCMA) that has the key optimization considerations incorporated in its design. Finally, we present a distributed SCMA protocol that approximates the centralized algorithm and compare its performance against that of baseline protocols that are CSMA/CA variants.     

2DEG base hot electron transistors fabricated using MBE and in situion beam lithography

A vertical hot electron transistor incorporating a two-dimensional electron gas (2DEG) base has been fabricated in the GaAs-AlGaAs materials system. The difficulties caused by the need to form selective ohmic contacts to the different conducting layers have been overcome using a combination of in situ focused ion beam (FIB) isolation and molecular beam epitaxial (MBE) regrowth. This has allowed a high yield of working devices to be achieved with a typical common emitter current gain of h_FE=6 at low temperatures     

Structural transformations in surface layers of amorphous ribbons Ni78SixB22−x

The thermal stability of NI₇₈Si_xB_22–x (x = 6, 9, 12, 15) metallic glasses, produced by the single-roll melt spinning method, has been investigated by differential thermal analysis (DTA) and by measuring the temperature dependences of the exoelectron emission (EEE) and contact potential difference (CPD) relative to platinum. It has been found that both CPD and EEE show anomalies at temperatures corresponding to the structural transformations in the surface layer of investigated materials. The surface crystallization occurs at temperature of 150 K lower than the volume crystallization. The activation energy for the surface crystallization is also distinctly lower than that for crystallization in bulk.     

Electrochromic display devices of tungstic oxide containing vanadium oxide or cadmium sulphide as a light-sensitive layer

Solid-state electrochromic display devices (ECDs) have been prepared using vacuum deposited tungstic oxide as the primary electrochromic material. Such devices form colour during irradiation from a fluorescent-tube as light source. Initial experiments incorporated (evaporated) CdS films and the proton-conducting poly(ethylene oxide)-phosphoric acid electrolyte (1:1) plasticised with acetonitrile. Successful photoelectrochromic devices were prepared in this way provided the electrolyte was anhydrous, since films of CdS are sensitive to water-attack. Another device to evince photoelectrochromism was one containing layers of WO₃ and V₂O₅. This combination of oxides was the most promising, responding to a 1/20s flash of intense white light. As yet, the colour formed in this way cannot be electro-bleached. These displays may also be used as normal—electrolytically driven—devices in the absence of irradiation.     

Glimmer: Multilevel MDS on the GPU

We present Glimmer, a new multilevel algorithm for multidimensional scaling designed to exploit modern graphics processing unit (GPU) hardware. We also present GPU-SF, a parallel, force-based subsystem used by Glimmer. Glimmer organizes input into a hierarchy of levels and recursively applies GPU-SF to combine and refine the levels. The multilevel nature of the algorithm makes local minima less likely while the GPU parallelism improves speed of computation. We propose a robust termination condition for GPU-SF based on a filtered approximation of the normalized stress function. We demonstrate the benefits of Glimmer in terms of speed, normalized stress, and visual quality against several previous algorithms for a range of synthetic and real benchmark datasets. We also show that the performance of Glimmer on GPUs is substantially faster than a CPU implementation of the same algorithm.     

Development and Experimental Demonstration of a Self-Powered ETO (SPETO)

This paper presents the design and experimental demonstration of a superior high-power-device self-powered emitter turn-off thyristor (SPETO). Different from conventional high-power devices which require external power input for their gate drivers, the SPETO achieves optically controlled turn on and turn off, and all of the internal power required is self-obtained. A low-loss gate-drive circuit is implemented which allows the simple power-up operation. During a normal switching operation, the SPETO obtains a power for the gate drive during its turn-on operation. A novel switching strategy is also introduced to minimize the gate-drive power requirement. The SPETO greatly reduces costs and increases the reliability of power converters since no external power supply for device gate drive is required. Therefore, the SPETO is suitable for high-power high-frequency voltage-source-converter applications     

Anisotropic loss of toughness with physical aging of work toughened polycarbonate

We have studied the response of mechanically toughened and physically aged polycarbonate primarily using Charpy impact and ultrasonic wave speed measurements. The toughening was conducted through plastic compression on as‐received PC. The Charpy impact tests showed anisotropic toughening, both in the absorbed energy and in the mode of fracture. The amount of toughening with plastic compression, even though anisotropic, is centered around the response of annealed and quenched samples, which represent the response of an unaged PC. There was an anisotropic drop in the toughness of some samples with aging. The time of this drop was uncorrelated in the different directions and disappeared for the highly toughened samples. This transition was bimodal and statistically distributed between either a fully ductile or a fully brittle failure. As the samples were prepared in a manner to remove induced residual stresses, this drop in toughening may be associated with an intrinsic anisotropic thermal aging of the deformed material. POLYM. ENG. SCI., 54:794–804, 2014. © 2013 Society of Plastics Engineers