脱层材料与槽接式挫屈束制支撑的性能研究

挫屈束制支撑耐震性能优劣与否与脱层材料性能有密切关系,首先提出了一种估算脱层不完全因子的方法,利用4组分别使用不同脱层材料的挫屈束制支撑进行构件试验;研究结果表明以黏性橡胶作为脱层材料具有可靠性、经济性与优良的施工性。特别介绍了地震工程研究中心近期所研发的槽接式挫屈束制支撑,并通过3组实尺寸构件试验验证了其耐震性能;测试构件包含一组长度为12.5m,最大抗压强度超过16800kN,核心消能段应变量达3.5%的构件。试验结果表明,新研发的槽接式挫屈束制支撑经济效益极高,迟滞消能行为良好稳定,具有优良的耐震性能,各组试体于试验停止前所累积的总非线性变形量皆超过400倍斜撑屈曲位移量;研究亦显示,非线性结构分析软件PISA3D可准确预测其受力与变形反应。     

ISO/IEC、美日中氢能技术标准化体系比较与建议

技术标准在技术进步、国际贸易中具有重要作用。全景式梳理、比较氢能技术标准化体系发展与现状,对于促进技术进步、规范国际贸易至关重要。本文综述了ISO/IEC、美国、日本和中国等5个主体氢能技术标准化体系：介绍了上述5个主体的氢能标准化机构,详细梳理了ISO/IEC氢能国际标准与美日中氢能国家标准/行业标准的层级结构比例,并按标准具体内容将其归类到8个技术类别中,分析了各主体在8个技术类别中的分布与特征。文中指出相比于美国和日本,中国氢能技术标准化体系存在行业标准数量较少、氢能产业联盟在行业标准制定中主导性弱和部分技术类别覆盖度低的不足。针对上述不足,文章对中国氢能技术标准体系提出两条发展建议：增加行业标准数量,以发挥其对标准体系补充、完善的作用,为此需赋予中国氢能产业联盟制定行业标准的权限;优化中国氢能技术标准分布,提高氢储运与加注以及氢能应用等技术类别的覆盖度,保障氢能产业从定点示范运营到城市群大规模推广的顺利升级。     

The Application of Nearly Embarrassingly Parallel Computation in the Optimization of Fluid-Film Lubrication©

The combination of powerful, yet inexpensive PCs and readily available open sources for parallel computation marks a new era of easy access to massive computation for the tribology community. The study demonstrates the applicability of embarrassingly parallel computation in the optimization of air-lubricated porous bearings with four design variables. To achieve high speedup without increasing the coding complexity, the master computer implements the lattice method to allocate the near-the-same computational load in the master-slave cluster. The effect of master capability on the cluster performance is also presented. The results are compared with that of an unparallelized simplex method and indicate a significant reduction in execution time due to parallelism. In a simulated analysis, a high speedup can also be obtained in dealing with a problem with many design variables. This study provides the framework for optimization of applications with complex tribological models to be solved with minimum execution time.     

AgOx型超分辨近场结构的非线性光学特性研究

采用共焦Z扫描系统，以λ=532nm．脉冲宽度0．7ns．重复频率15．79kHz的脉冲半导体激光器作为入射光源，研究了AgOx超分辨近场结构(SuperRENS)薄膜样品的非线性光学性质．实验获得了其三阶非线性折射率系数随入射光功率的变化曲线．并与Au，Ag薄膜作了比较．讨论了光致非线性变化过程。结果表明，在聚焦激光作用下．AgOx超分辨近场结构薄膜样品存在一相变点．即解析出纳米Ag颗粒，满足了产生局域表面等离子体的激发和增强效应的条件。     

电压倍增之像素设计

为了节省面板电路驱动芯片的功率损耗以及制作成本,本研究提出一种新的像素电路设计,而在设计中将会融合电荷泵电路。利用这种电路设计的像素可有效地将像素电极上的驱动电压提高到输入电压的2～3倍以上。此像素电路设计具有两个优势:第一,可以有效降低显示面板的像素功率损耗;第二,不需高电压的面板电路驱动芯片,因此可节省芯片的成本及功率损耗。由模拟结果可知,像素电极上的驱动电压确实可由此像素电路设计而提高到输入电压的2～3倍以上;而像素的功率损耗也可有效地降低,约为传统像素的1/2。     

OBSERVER-BASED HYBRID CONTROL OF SAMPLED-DATA UNCERTAIN SYSTEM WITH INPUT TIME DELAY

This paper proposes a new digital redesign method for determining the hybrid controller of a continuous-time system with input time delay using an observer-based digital controller. The proposed method together with the genetic algorithms is used to determine: (1) the interval digital model of a continuous-time uncertain system with input time delay, (2) the interval digital redesign control law and (3) the interval digital observer of the original continuous-time uncertain observer with input time delay. Moreover, the result is less conservative than those obtained by the existing interval methods. A discrete-time observer is built by the original continuous-time observer with input-time-delay control law and a predictor such that the estimated states of the redesigned discrete-time observer closely match those of the original continuous-time observer with input time delay not only at sampling instants but also the behavior of the system state during the sampling interval is optimal by minimizing the hybrid performance index. The digitally redesigned observer-based controller can closely match the states of the digitally redesigned uncertain sampled-data system with those of the original continuous-time observer-based controlled uncertain system with input time delay.