Inside Front Cover: The Elastic Properties and Plastic Behavior of Two‐Dimensional Polymer Structures Fabricated by Laser Interference Lithography (Adv. Funct. Mater. 10/2006)

The probing of the micromechanical properties within a two‐dimensional polymer structure with sixfold symmetry fabricated via interference lithography reveals a nonuniform spatial distribution in the elastic modulus “imprinted” with an interference pattern in work reported by Tsukruk, Thomas, and co‐workers on p. 1324. The image prepared by M. Lemieux and T. Gorishnyy shows how the interference pattern is formed by three laser beams and is transferred to the solid polymer structure. The elastic and plastic properties within a two‐dimensional polymer (SU8) structure with sixfold symmetry fabricated via interference lithography are presented. There is a nonuniform spatial distribution in the elastic modulus, with a higher elastic modulus obtained for nodes (brightest regions in the laser interference pattern) and a lower elastic modulus for beams (darkest regions in the laser interference pattern) of the photopatterned films. We suggest that such a nonuniformity and unusual plastic behavior are related to the variable material properties “imprinted” by the interference pattern.     

Transmission performance of 10-Gb/s 1550-nm transmitters using semiconductor optical amplifiers as booster amplifiers

We have demonstrated the transmission performance of 10-Gb/s transmitters based on LiNbO/sub 3/ modulator using semiconductor optical amplifiers (SOAs) as booster amplifiers. Utilizing the negative chirp converted in SOAs and self-phase modulation induced by high optical power, we can successfully transmit 10-Gb/s optical signals over 80 km through the standard single-mode fiber with the transmitter using SOAs as booster amplifiers. SOAs can be used for booster amplifiers with a careful adjustment of the operating conditions. In order to further understand an SOA's characteristics as a booster amplifier, we model SOAs and other subsystems to verify the experimental results. Based on the good agreement between the experimental and simulation results, we can find the appropriate parameters of input signals for SOAs, such as extinction ratio, rising/falling time, and chirp parameter to maximize output dynamic range and available maximum output power (P/sub o,max/).     

A printer model using signal processing techniques

An accurate printer model that is efficient enough to be used by halftoning algorithms is proposed. The proposed signal processing model (SPM) utilizes a physical model to train adaptive linear combiners (ALCs), after which the average exposure of each subpixel for any input pattern can be calculated using the optimized weight vector. The SPM can be used to model multi-level halftoning and resolution enhancement, as well as traditional halftoning. The SPM is comprised of a single ALC layer followed by a peak-to-average ratio (PAR) correction layer, which serves to produce a PAR of less than 1.5 in the modeled exposure. The PCN (PAR correction network) employs one ALC/pixel and exploits the physics governing the characteristics of exposure in small regions. A relatively small number of training patterns suffices to train the SPM.     

Transjugular intrahepatic portosystemic shunts (TIPS) in children

The transjugular intrahepatic portosystemic shunt procedure is an accepted treatment for adults with complications of portal hypertension. We performed a retrospective review of all pediatric TIPS placements performed at the University of California, San Francisco between 1990 and 1996. Twelve procedures were attempted in nine children, with a mean age (+/- SD) of 9.4 +/- 3.9 years (range, 5 to 15 years) and a mean weight of 31 +/- 18 kg (range, 16 to 70 kg). The indications for TIPS placement were portal hypertension complicated by chronic variceal hemorrhage not controlled with sclerotherapy (n = 7) and hypersplenism with thrombocytopenia (n = 2). TIPS placement was successfully completed initially in seven of nine (78%) patients. Unfavorable vascular anatomy was the cause of failure in two cases. The seven patients who underwent successful TIPS placement were followed up for an average of 136 days (range, 1 to 800 days); two still have patent shunts, three underwent liver transplantation, one had a splenorenal shunt after stenosis, and one died of underlying liver disease. Variceal bleeding was controlled in four of five patients who successfully underwent TIPS placement. Shunt occlusion occurred in four patients; patency was restored by transjugular shunt revision in three, and a splenorenal shunt was performed in one.     

Influence of caloric intake on aging and on the response to stressors

Reducing the food intake of rodents to well below that of ad libitum fed animals increases the life span. This action, which gerontologists often refer to as the antiaging action of dietary restriction (DR), is due to the slowing of the aging processes. DR also maintains most physiological processes in a youthful state and delays the occurrence and/or slows the progression of age-associated disease processes. This antiaging action of DR results from the reduced intake of calories. Reduction of the body fat content does not play a causal role in the antiaging action of DR, nor does reduction in the metabolic rate. Alterations in the characteristics of carbohydrate metabolism and of oxidative metabolism in response to DR have been found that are of such a nature that they could, at least in part, underlie the antiaging action. Several theories have recently been proposed in regard to the mechanisms responsible for the antiaging action of DR, but none has been tested by rigorously designed studies. Of these theories, the one that seems most promising is based on the fact that DR protects rats and mice of all ages against the damaging actions of acute stressors. This protective action against stressors may play a major role in the antiaging action of DR.     

Recurrent erosion after photorefractive keratectomy

Recurrent erosion of the corneal epithelium has been treated successfully by phototherapeutic keratectomy when convention therapy has failed. We present a case of recurrent corneal erosion occurring 1 year after photorefractive keratectomy in a 55-year-old myopic woman. No corneal abnormalities were previously identified in either the affected or the fellow eye. This case demonstrates the potential for ineffective healing of the corneal epithelial basement membrane complex after excimer laser photorefractive keratectomy.     

Professor Gerard Jonderko--life and achievements of the honorary member of the Polish Society of Internal Medicine

Between February 1995 to August 1997, 120 patients underwent elective stent implantation for isolated proximal left anterior descending coronary artery stenosis. Their age ranged from 31 to 72 years (mean: 50.8 +/- 10.2) and the majority (89%) were males. All patients had angina, documented myocardial ischemia or both and 70 percent or more luminal diameter stenosis in the proximal left anterior descending before the origin of any branch. Majority (62.5%) of the treated lesions were type A. Successful deployment of the stent at the target site was achieved in all patients without any major in-hospital complications, including myocardial infarction, emergency bypass graft surgery or death. Clinical follow-up, ranging from 6 to 31 months (mean: 18.5 +/- 8.1, median: 20), was available in 87 out of 92 (94.5%) eligible patients who had completed at least six months after the procedure. Freedom from angina, myocardial infarction, target lesion revascularization and death was observed in 90.8, 100, 95.4 and 97.7 percent of patients, respectively. By the Kaplan-Meier estimate, an event-free survival (absence of death, myocardial infarction, recurrence of angina or revascularization) was 95.4 percent at six months, 89.5 percent at 12 and 18 months and 82.7 percent at 24 to 31 months of follow-up. Only 10 (11.5%) patients developed any event and TLR was required in 4.6 percent of patients. In conclusion, elective stenting for isolated proximal left anterior descending stenosis can be achieved safely and successfully in all patients without any adverse in-hospital events. This modality of treatment also provides long-term benefits in terms of reduction in major cardiovascular events and need for subsequent revascularization.     

Complementary effects of solid lubricants in the automotive brake lining

An experimental investigation was carried out to examine the tribological behavior of NAO (non-asbestos organic) type brake linings containing different volume ratios of graphite and antimony trisulfide (Sb₂S₃). A scale dynamometer was used for friction tests and particular emphases were given to the effect of applied pressure, sliding speed, and temperature on the coefficient of friction according to the relative amounts of the two solid lubricants. Results showed that the brake linings with both solid lubricants exhibited better friction stability and less speed sensitivity than the friction materials containing a single solid lubricant. In particular, the brake lining containing higher concentrations of graphite showed better fade resistance than others during high-temperature friction test.     

Effect of Thickness of the p-AlGaN Electron Blocking Layer on the Improvement of ESD Characteristics in GaN-Based LEDs

The following letter presents a study regarding GaN-based light-emitting diodes (LEDs) with p-type AlGaN electron blocking layers (EBLs) of different thicknesses. The study revealed that the LEDs could endure higher electrostatic discharge (ESD) levels as the thickness of the AlGaN EBL increased. The observed improvement in the ESD endurance ability could be attributed to the fact that the thickened p-AlGaN EBL may partly fill the dislocation-related pits that occur on the surface of the InGaN-GaN multiple-quantum well (MQW) and that are due to the strain and the low-temperature-growth process. If these dislocation-related pits are not partly suppressed, they will eventually result in numerous surface pits associated with threading dislocations that intersect the InGaN-GaN (MQW), thereby reducing the ESD endurance ability. The results of the experiment show that the ESD endurance voltages could increase from 1500 to 6000 V when the thickness of the p-AlGaN EBL in the GaN LEDs is increased from 32.5 to 130 nm, while the forward voltages and light output powers remained almost the same.     

Selective employment of chemokine receptors as human immunodeficiency virus type 1 coreceptors determined by individual amino acids within the envelope V3 loop

The chemokine receptor CCR5 acts as an essential cofactor for cell entry by macrophage-tropic human immunodeficiency virus type 1 (HIV-1) strains, whereas CXCR4 acts as an essential cofactor for T-cell-line-adapted strains. We demonstrated that the specific amino acids in the V3 loop of the HIV-1 envelope protein that determine cellular tropism also regulate chemokine coreceptor preference for cell entry by the virus. Further, a strong correlation was found between HIV-1 strains classified as syncytium inducing in standard assays and those using CXCR4 as a coreceptor. These data support the hypothesis that progressive adaptation to additional coreceptors is a key molecular basis for HIV-1 phenotypic evolution in vivo.