Performance engineering and topological design of metro WDM opticalnetworks using computer simulation

This paper demonstrates the use of computer simulation for topological design and performance engineering of transparent wavelength-division multiplexing metropolitan-area networks. Engineering of these networks involves the study of various transport-layer impairments such as amplifier noise, component ripple, chirp/dispersion, optical crosstalk, waveform distortion due to filter concatenation, fiber nonlinearities, and polarization effects. A computer simulation methodology composed of three main simulation steps is derived and implemented. This methodology obtains performance estimations by applying efficient wavelength-domain simulations on the entire network topology, followed by time-/frequency-domain simulations on selected paths of the network and finally Q-budgeting on an identified worst case path. The above technique provides an efficient tool for topological design and network performance engineering. Accurate simulation models are presented for each of the performance impairments, and the computer simulation methodology is used for the design and engineering of a number of actual metro network architectures     

Experimental peri-implant tissue breakdown around hydroxyapatite-coated implants

Factor V Leiden mutation was initially detected in thrombophilic patients and relatives by PCR RFLP (Restriction Fragment Length Polymorphism) according to Bertina (1). This technique presents some drawbacks and the current trend is to simplify the diagnosis. We describe a technique of Allele Specific Amplification (ASA) which is optimized in terms of reliability: an additional mismatch in antepenultimate position enables to obtain the same specificity as PCR RFLP. Furthermore, coamplification of internal control warrants an optimal sensitivity. All the PCR have been simplified: the DNA extraction improvement allows to analyse the genotype with only a few microliters of whole blood whatever the anticoagulant and the procedure of preservation (freezing, dried blood spots, storage at +4 degrees C for several days). This technique saves time. Moreover, full automation of the ASA technique may be shortened thanks to the lack of extraction and the positive/negative reading of the PCR signal.     

Recovery of flavonoids from grape skins by enzyme-assisted extraction

Grape skin contains large amounts of different flavonoids so it can be used for their recovery. Optimization of enzyme-assisted extraction of flavonoids was conducted using oenological enzyme preparations with respect to enzyme dosage, temperature, extraction time, pH, and enzyme preparation. Optimal conditions were obtained using enzyme preparation Lallzyme EX-V, at the temperature of 45°C, time of 3 h, pH 2.0, and enzyme dosage of 10.52 mg/g. The new optimized extraction method is less expensive, simple, accurate, and selective for the recovery of simple flavonoids. It is based on an environmentally-friendly extraction solvent which may provide a valuable alternative to conventional methods.     

Densification and phase transformation of Si3N4 in the presence of mechanically activated BaCO3–Al2O3–SiO2 mixture

Densification as well as the →β phase transformation of Si₃N₄ were monitored as a function of activation time of the BaCO₃–Al₂O₃–SiO₂ additive mixture. The composition of the ternary mixture corresponded to celsian (BaAl₂Si₂O₈—BAS). Previously, mechanically activated powder mixtures for various lengths of time were added to Si₃N₄ in the amount of 10–30%. Sintering was performed at 1650–1700°C in nitrogen atmosphere up to 8 h. The changes in densification degree, as well as phase composition, were followed as a function of heating time and the time of mechanical activation of the additive mixture. The results obtained showed that mechanical activation retarded densification in samples heated up to 1700°C. On the other hand, for the constant sintering time, →β transformation of Si₃N₄ was enhanced with increasing activation time, and the amount of additives.     

Coupled Electron- and Proton-Transfer Processes in the Reduction of α-[P(2)W(18)O(62)](6)(-) and α-[H(2)W(12)O(40)](6)(-) As Revealed by Simulation of Cyclic Voltammograms

Quantitative analysis of the complex problem of coupled electron- and proton-transfer steps during reduction of the polyoxo anions α-[P(2)W(18)O(62)](6)(-) and α-[H(2)W(12)O(40)](6)(-) in aqueous NaCl (0.5 M) has been achieved by simulation of cyclic voltammograms (Rudolph, M.; Reddy, D. P.; Feldberg, S. W. Anal. Chem. 1994, 66, 589A) over wide ranges of anion concentration, pH, and scan rate. Since there are too many unknown parameters to attempt a one-step global form of simulation, a systematic, stepwise approach has been adopted by progressively accessing regimes of increasing voltammetric complexity. This protocol allows experimental behavior in each system over 5 orders of magnitude in proton concentration to be simulated by estimation of three protonation constants combined with experimentally determined reversible half-wave potentials for the two one-electron processes involved. Fast electron transfer and protonation kinetics are assumed. The importance of the values chosen for the diffusion coefficients of the proton and polyoxo anion species is considered. The simulations account for the fact that pairs of one-electron processes coalesce to give an apparent two-electron process in the pH range 1-6 for reduction of both anions.     

Thermophoretic Coating with Molybdenum Oxide Nanoparticles

Thermophoretic and electrophoretic coatings are the main viable mechanisms for the coating of objects with nanoparticles. Unlike electrophoretic coating, thermophoretic coating has the advantage that electrically conductive substrates are not a requirement. This paper investigates the thermophoretic deposition and uniformity of molybdenum oxide nanoparticles, generated by a glowing wire generator, on various surfaces at three different flow rates (0.3, 1 and 1.5 L min^–1). The quantitative evidence of the presence of particles collected by a suggested thermophoretic precipitator at different flow rates has shown that a uniform distribution of the particles could be achieved across the whole area of the precipitator. SEM and TEM micrographs of the film confirmed that a homogeneous densely packed network of molybdenum oxide nanoparticles was built across the precipitation area at the flow rate of 1.5 L min^–1.     

Influence of Ultrasonic Oscillation on Static and Sliding Friction

Vibrations of varying frequency and amplitude are used in many technological areas to control and reduce friction. In this study we report the results of systematic high-precision measurements of the static and sliding friction under the influence of ultrasonic oscillations. We investigate the effect of ultrasonic oscillations for in-plane and out-of-plane oscillations in the completely relevant interval of oscillation amplitudes and sliding velocities and for various material pairings. The experimental results are interpreted on the basis of both macroscopic and microscopic models. There are two main effects which are of interest for tribological applications. Firstly, the frictional force typically decreases with increasing oscillation amplitude, with an oscillation amplitude of about 0.1???m typically being sufficient for a significant decrease of frictional force. Secondly, the decrease of force is larger at smaller sliding velocities; therefore, at sufficiently large oscillation amplitudes, the frictional force always increases with sliding velocity. This effect can be used to suppress frictionally induced vibrations.     

Effects of filter concatenation for directly modulated transmissionlasers at 2.5 and 10 Gb/s

We report computer simulation results of the effects on optical signal quality of passage through a cascade of wavelength division multiplexing (WDM) filters-multiplexers and demultiplexers-for directly modulated lasers with different chirp characteristics. In particular, lasers with transient or adiabatic chirp characteristics at 2.5 Gb/s and 10 Gb/s are investigated, and we find clear differences between the laser types with respect to filter concatenation effects. Filters with an optical bandwidth suitable for a 200-GHz channel-spacing system are considered, and we evaluate the system behavior as a function of laser frequency offset for a fixed number of filters. The reference network architecture used for the simulations is an optically transparent metropolitan scale network in which the WDM signals may be demultiplexed and then multiplexed again at multiple optical network elements. The signal quality is evaluated in terms of a distortion-induced eye-closure penalty as well as the excess attenuation or loss suffered. We find that transient chirp-dominated lasers show a generally symmetric distortion penalty response to laser frequency offset, whereas the response for adiabatic chirp dominated lasers is highly asymmetric. Furthermore, the extinction ratio for the latter class of lasers can be improved, in some cases, by the appropriate offset between laser and filter center frequencies     

Electrochemical behavior of an Ag/TiO2 composite surfaces

Silver in a form of randomly distributed submicron-sized particles was electrodeposited, and simultaneously, titanium dioxide layer was formed, on the surface of mechanically polished titanium, by its potentiodynamic polarization in an aqueous AgNO₃ solution. In such obtained Ag/TiO₂ composite layer, the particle size distribution, and silver loading were determined by means of scanning electron microscopy. The electrochemical response of this composite layer was studied in both oxygen-free and oxygen saturated aqueous 0.1 M NaOH solution. The catalytic activity toward oxygen reduction reaction of this and other forms of silver- and platinum-based materials was compared.