Energy expenditure in workers who install plastic and metal pipes for water supplies and sewage

Since 1985, many drug abuse treatment centers and health care providers have implemented special education programs for individuals who inject drugs. They focus primarily on increasing awareness of the threat of the human immunodeficiency virus (HIV) being spread through drug injection equipment and by sexual activities. As part of the Drug Abuse Treatment for AIDS-Risk Reduction (DATAR) project, the AIDS/HIV Risk Reduction Module was designed to meet these special intervention needs. This study examined program impact on 110 methadone treatment clients. Results indicated that for those in treatment less than 4 months, the AIDS intervention program enhanced specialized knowledge about AIDS, aided in the reduction of AIDS-risky behaviors, and enhanced attitudes toward achieving and maintaining abstinence from drug use. Thus, AIDS education and intervention programs appear to be effective and should be emphasized in the early phase of drug abuse treatment.     

Angiogenesis of gynecologic tumors studied with color Doppler

Angiogenesis is obligatory event in solid tumors growth. Weak muscular layer in the newly formed tumoral vessels results in decreased resistance to blood flow and characteristic Doppler signal. The number and arrangement of the blood vessels differ between benign and malignant lesions as well. Parameters mentioned above enable a precise ultrasound differential diagnosis between benign and malignant tumors. Malignant uterine tumors are better perfused and have lower resistance to blood flow than benign ones. Benign lesions with secondary changes (necrosis) may have lowered resistance indices. The finding of pathological perfusion makes the diagnosis of endometrial carcinoma also very accurate. High sensitivity of the transvaginal color Doppler in detecting newly formed blood vessels in an early stages of ovarian cancer may establish this technique as a screening method for this still very high lethality disease.     

Aluminium content of beers

 The aluminium (Al) concentration in different brands of beers packaged in Al cans and glass bottles was measured at the end of the shelf-life of the beer, by the Zeeman graphite furnace atomic absorption spectrophotometry (ZGFAAS) method. The results show that in all cases a brand of beer packaged in an Al can has a higher Al content than the same brand bottled in glass. The measurements of the Al concentration in some Al-canned beers throughout 12 months of storage show that a relatively small increase of the Al concentration in beers occurs throughout storage. All these results indicate that some Al is taken up by the beer in Al cans, presumably through the slight and slow dissolution of Al from the can wall, due to some defects in the protective lacquer layer. The evaluated daily intake of Al (0.256 mg) possible through the consumption of beer was practically negligible in relation to both the total daily dietary Al intake and the tolerable daily Al intake. Thus, beers are an insignificant source of dietary Al intake and it appears that the Al intake from beers (due to the low content of Al in beers and its low bioavailability) should not be a cause for concern with regard to Al toxicity for the human body. Received: 22 April 1996     

Selenium content of breast milk

Selenium levels in human milk in the winter period ranged from 5.3 μg/l to 23.8 μg/l, the mean value being 11.0 μg/l. The nursing women were divided into several groups according to the results of a questionnaire, i.e. according to their social status (refugees or otherwise), number of deliveries, post partum days, the weight they had gained during pregnancy, their age and smoking habits. The mean levels of selenium for each group are presented. Selenium was determined by hydride generation atomic absorption spectrometry.     

Calculated Uncertainty of Temperature Due to the Size-of-Source Effect in Commercial Radiation Thermometers

The article evaluates the uncertainty in the temperature indicated by a radiation thermometer with a direct readout in temperature, due to the uncertainty in measuring the size-of-source effect (SSE) by the so-called “direct method.” Radiation thermometers of this type are the ones most frequently used in practice. The uncertainty of the SSE characteristic is usually not a useful quantity to report to users of commercial radiation thermometers. Instead, they would prefer to know the uncertainty in the measured temperature that results from the uncertainty of the SSE characteristic, and this will be the result of our analysis. The user of a direct reading radiation thermometer will be able to take into account the uncertainty of temperature due to the SSE, if a target with known dimensions is measured. The uncertainty in temperature due to the SSE of analyses based on Planck’s law and its approximation, Wien’s law is compared.     

Analysis of different containment models for IRIS small break LOCA, using GOTHIC and RELAP5 codes

Advanced nuclear water reactors rely on containment behaviour in realization of some of their passive safety functions. Steam condensation on containment walls, where non-condensable gas effects are significant, is an important feature of the new passive containment concepts, like the AP600/1000 ones.In this work the international reactor innovative and secure (IRIS) was taken as reference, and the relevant condensation phenomena involved within its containment were investigated with different computational tools. In particular, IRIS containment response to a small break LOCA (SBLOCA) was calculated with GOTHIC and RELAP5 codes. A simplified model of IRIS containment drywell was implemented with RELAP5 according to a sliced approach, based on the two-pipe-with-junction concept, while it was addressed with GOTHIC using several modelling options, regarding both heat transfer correlations and volume and thermal structure nodalization. The influence on containment behaviour prediction was investigated in terms of drywell temperature and pressure response, heat transfer coefficient (HTC) and steam volume fraction distribution, and internal recirculating mass flow rate. The objective of the paper is to preliminarily compare the capability of the two codes in modelling of the same postulated accident, thus to check the results obtained with RELAP5, when applied in a situation not covered by its validation matrix (comprising SBLOCA and to some extent LBLOCA transients, but not explicitly the modelling of large dry containment volumes).The option to include or not droplets in fluid mass flow discharged to the containment was the most influencing parameter for GOTHIC simulations. Despite some drawbacks, due, e.g. to a marked overestimation of internal natural recirculation, RELAP5 confirmed its capability to satisfactorily model the basic processes in IRIS containment following SBLOCA.     

Cocaprins, β-Trefoil Fold Inhibitors of Cysteine and Aspartic Proteases from Coprinopsis cinerea

We introduce a new family of fungal protease inhibitors with β-trefoil fold from the mushroom Coprinopsis cinerea, named cocaprins, which inhibit both cysteine and aspartic proteases. Two cocaprin-encoding genes are differentially expressed in fungal tissues. One is highly transcribed in vegetative mycelium and the other in the stipes of mature fruiting bodies. Cocaprins are small proteins (15 kDa) with acidic isoelectric points that form dimers. The three-dimensional structure of cocaprin 1 showed similarity to fungal β-trefoil lectins. Cocaprins inhibit plant C1 family cysteine proteases with K_i in the micromolar range, but do not inhibit the C13 family protease legumain, which distinguishes them from mycocypins. Cocaprins also inhibit the aspartic protease pepsin with K_i in the low micromolar range. Mutagenesis revealed that the β2-β3 loop is involved in the inhibition of cysteine proteases and that the inhibitory reactive sites for aspartic and cysteine proteases are located at different positions on the protein. Their biological function is thought to be the regulation of endogenous proteolytic activities or in defense against fungal antagonists. Cocaprins are the first characterized aspartic protease inhibitors with β-trefoil fold from fungi, and demonstrate the incredible plasticity of loop functionalization in fungal proteins with β-trefoil fold.     

Optimization of a Fabric Softener Formulation with an Electrochemical Sensor and Streaming Potential Measurements

An electrochemical, cationic, surfactant-selective sensor based on multiwalled carbon nanotubes (MWCNT) functionalized with a sulfate group and the cetylpyridinium ion (MWCNT–OSO₃⁻CP⁺) as a sensing material was used for optimization of the formulation of a fabric softener. Potentiometric titrations were performed and response measurements were obtained using four cationic surfactants (CS) of technical grade and four CS of analytical grade. The slope closest to Nernstian was obtained for di-(tallow carboxyethyl) hydroxyethyl methylammonium methosulfate (MAS) (59.5 ± 1.1 mV/decade of activity in water and 57.5 ± 1.3 mV/decade of activity in CaCl₂). When using CS as analytes in potentiometric titrations, the best accuracy (99.8%) was obtained when using MAS; therefore, it was chosen as the CS for the fabric softener formulation. Due to the better properties of fabric softeners with silicone in their formulations, four silicones at several concentration levels were used as potential additives. Based on the stability and viscosity of the system, the diquaternary polydimethylsiloxane (DPS) (w = 0.19%) was chosen for the fabric softener formulation. The pH did not significantly influence the potential when in the range of 3–8 or the recovery of potentiometric titrations when in the range of 3–7. The application profile of the CS was assessed through streaming potential measurements of reference fabrics in an electrokinetic analyzer. The obtained electrokinetic parameters indicated on lag in adsorption of model fabric softener (MFS) based on MAS (w = 9%), with the addition of silicone DPS (MFS 3), on cotton and polyester fabrics, but advantage in stability when compared with other MFS investigated.     

Analysis of Thermal Imagers

A thermal imager with a microbolometer focal plane array (FPA) detector which does not require cooling is a relatively new type of instrument. With increasing use of thermal imagers for absolute temperature measurements, there is also an increasing need for their calibration. Five thermal imagers from three manufacturers were evaluated to identify parameters which affect their performance for accurate temperature measurements. Evaluation methods and measurements of parameters such as accuracy, temperature resolution, drift between internal calibration, non-uniformity, size-of-source effect, and distance effect are discussed. Based on the results, it is indicated which parameters should be evaluated in the calibration procedure as well as the uncertainty budget. The suitability of a blackbody for calibration was also addressed, especially in terms of dimensions related to the field of view of a thermal imager at the minimum focal distance.