Inheritance Of Resistance To Mammalian Herbivores and Of Plant Defensive Chemistry In A <Emphasis Type="Italic">Eucalyptus</Emphasis> Species

Hybridization in plants provides an opportunity to investigate the patterns of inheritance of hybrid resistance to herbivores, and of the plant mechanisms conferring this resistance such as plant secondary metabolites. We investigated how inter-race differences in resistance of Eucalyptus globulus to a generalist mammalian herbivore, Trichosurus vulpecula, are inherited in their F₁ hybrids. We assessed browsing damage of three-year-old trees in a common environment field trial on four hybrid types of known progeny. The progency were artificial intra-race crosses and reciprocal inter-race F₁ hybrids of two geographically distinct populations (races) of E. globulus; north-eastern Tasmania and south-eastern Tasmania. Populations of trees from north-eastern Tasmania are relatively susceptible to browsing by T. vulpecula, while populations from south-eastern Tasmania are more resistant. We assessed the preferences of these trees in a series of paired feeding trials with captive animals to test the field trial results and also investigated the patterns of inheritance of plant secondary metabolites. Our results demonstrated that the phenotypic expression of resistance of the inter-race F₁ hybrids supported the additive pattern of inheritance, as these hybrids were intermediate in resistance compared to the pure parental hybrids. The expression of plant secondary metabolites in the F₁ hybrids varied among groups of individual compounds. The most common pattern supported was dominance towards one of the parental types. Together, condensed tannins and essential oils appeared to explain the observed patterns of resistance among the four hybrid types. While both chemical groups were inherited in a dominant manner in the inter-race F₁ hybrids, the direction of dominance was opposite. Their combined concentration, however, was inherited in an additive manner, consistent with the phenotypic differences in browsing.     

Sediment storage and shallow groundwater response to beaver dam analogues in the Colorado Front Range,USA

Enthusiasm for using beaver dam analogues (BDAs) to restore incised channels and riparian corridors has been increasing. BDAs are expected to create a similar channel response to natural beaver dams by causing channel bed aggradation and overbank flow, which subsequently raise water tables and support vegetation growth. However, lack of funding for monitoring projects post‐restoration has limited research on whether BDAs actually cause expected channel change in the Front Range and elsewhere. Geomorphic and hydrologic response to BDAs was monitored in two watersheds 1 year post‐restoration. BDAs were studied at Fish Creek, a steep mountainous catchment, and Campbell Creek, a lower gradient piedmont catchment from May to October 2018. At each restoration site, the upstream‐ and downstream‐most BDAs were chosen for intensive study in comparison with unrestored reference reaches. Monitoring focused on quantifying sediment volumes in BDA ponds and recording changes to stream stage and riparian groundwater. Despite differences in physical basin characteristics, BDA pools at both sites stored similar volumes of sediment and stored more sediment than reference pools. Sediment storage is positively correlated to BDA height and pool surface area. However, BDAs did not have a significant influence on shallow groundwater. The lack of groundwater response proximal to BDAs could indicate that local watershed factors have a stronger influence on groundwater response than restoration design 1 year post‐restoration. Systematic, long‐term studies of channel and floodplain response to BDAs are needed to better understand how BDAs will influence geomorphology and hydrology.     

Optimal Filters from Calibration Data for Image Deconvolution with Data Acquisition Error

Data acquisition errors due to dead pixels or other hardware defects can cause undesirable artifacts in imaging applications. Compensating for these defects typically requires knowledge such as a defective pixel map, which can be difficult or costly to obtain and which is not necessarily static. However, recent calibration data is readily available in many applications. In this paper, we compute optimal filters for image deconvolution with denoising using only this calibration data, by minimizing the empirical Bayes risk. We derive a bound on how the reconstruction changes as the number of dead pixels grows. We show that our approach is able to reconstruct missing information better than standard filtering approaches and is robust even in the presence of a large number of defects and to defects that arise after calibration.     

α-Alumina and spinel react into single-phase high-alumina spinel in <3 seconds during flash sintering

In situ X-ray diffraction measurements at the Advanced Photon Source show that α-Al₂O₃ and MgAl₂O₄ react nearly instantaneously and completely, and nearly completely to form single-phase high-alumina spinel during voltage-to-current type of flash sintering experiments. The initial sample was constituted from powders of α-Al₂O₃, MgAl₂O₄ spinel, and cubic 8 mol% Y₂O₃-stabilized ZrO₂ (8YSZ) mixed in equal volume fractions, the spinel to alumina molar ratio being 1:1.5. Specimen temperature was measured by thermal expansion of the platinum standard. These measurements correlated well with a black-body radiation model, using appropriate values for the emissivity of the constituents. Temperatures of 1600-1736°C were reached during the flash, which promoted the formation of alumina-rich spinel. In a second set of experiments, the flash was induced in a current-rate method where the current flowing through the specimen is controlled and increased at a constant rate. In these experiments, we observed the formation of two different compositions of spinel, MgO•3Al₂O₃ and MgO•1.5Al₂O₃, which evolved into a single composition of MgO•2.5Al₂O₃ as the current continued to increase. In summary, flash sintering is an expedient way to create single-phase, alumina-rich spinel.     

Photochromic Polymers Based on the Photoinduced Opening and Thermal Closing of [1,3]Oxazine Rings

Two macromolecular constructs incorporating a single polymer backbone with multiple photochromic side chains are developed. Both systems are prepared from preformed photochromic [1,3]oxazines after the ring‐opening polymerization of their norbornene appendages. In solution, UV illumination of these polymers opens the [1,3]oxazine rings in their side chains in less than 6 ns and with a quantum yield of 0.09 in both instances. The photogenerated species incorporate a 4‐nitrophenolate chromophore, and hence, their formation is accompanied by the appearance of an intense band in the visible region of the absorption spectrum. The photoproducts revert spontaneously to the original state with first‐order kinetics in microseconds. Furthermore, both photochromic polymers tolerate hundreds of switching cycles with no sign of degradation, even in the presence of molecular oxygen. Thus, this design logic and choice of functional building blocks can translate into the realization of innovative photoresponsive materials with excellent photochromic performance.     

Influence of the storage orientation on the aerodynamic particle size of a suspension metered dose inhaler containing propellant HFA-227

Presented in this work are the results of a study designed to investigate the impact of the storage position on the particle size distribution (PSD) of a steroid suspension metered dose inhaler (MDI) containing propellant HFA-227. It was hypothesized that the orientation of MDI samples upon storage could influence the PSD of the emitted dose, since it determines the amount of contact the liquid formulation has with the valve and therefore the quantity of nonvolatile leachable materials from the valve components that may enter the product and potentially impact the aerosol spray dynamics. Samples stored in the valve down orientation (i.e., complete contact of the liquid formulation with the valve) showed a higher level of leachables compared to those samples stored valve up (i.e., minimal contact of the formulation with the valve). The valve down samples were found to produce larger particles in the emitted aerosol spray using both cascade impaction, the preferred method of regulatory submission, as well as laser diffraction. It was postulated that the larger particle size of the inverted samples was attributed to its higher levels of leachables. Based on our findings, it is recommended that in order to set appropriate controls on the product PSD, the storage orientation of the product will need to be considered.     

The classroom environment and students' reports of avoidance strategies in mathematics: A multimethod study.

The relation between the learning environment (e.g., students' perceptions of the classroom goal structure and teachers' instructional discourse) and students' reported use of avoidance strategies (self-handicapping, avoidance of help seeking) and preference to avoid novelty in mathematics was examined. Quantitative analyses indicated that students' reports of avoidance behaviors varied significantly among classrooms. A perceived emphasis on mastery goals in the classroom was positively related to lower reports of avoidance. Qualitative analyses revealed that teachers in high-mastery/low-avoidance and low-mastery/high-avoidance classrooms used distinctively different patterns of instructional and motivational discourse. High incidence of motivational support was uniquely characteristic of high-mastery/ low-avoidance classrooms, suggesting that mastery goals may include an affective component. Implications of the results for both theory and practice are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)