EXPLORING FOR FAN AND DELTA SANDSTONES IN THE OFFSHORE FALKLANDS BASINS

Four basins surround the Falkland Islands, but only the North Falkland Basin has been drilled; six wells were drilled there in 1998. Although all six wells encountered good quality sandstones, none of them targeted the basin margins, on what are now thought to be the optimum migration pathways associated with the basin's thick lacustrine source rocks. Subsequently, a 3D seismic survey acquired in 2004 was designed to identify potential basin-margin -derived sandstones entering the basin along transfer zones. From this survey, a number of basin-margin -attached fans have been identified; these prograded into lacustrine waters of varying depths. These Early Cretaceous alluvial/fan delta/deep-lacustrine fan systems are interpreted to provide excellent potential reservoir facies as they are intimately associated with thick, mature source rocks. They will provide the focus for the next planned phase of exploration in the North Falkland Basin.
A phase of drilling is also planned for the basins to the south of the Islands, where large deltaic and fan systems, slightly younger than those imaged in the North Falkland Basin, are seen on seismic to prograde from the same Palaeozoic hinterland that produced the older, North Falkland Basin fans.
This paper attempts to show how sedimentary models derived from targeted seismic programmes following initial exploration can be utilised to plan and improve new drilling campaigns in a frontier basin. It presents an analysis of sediment dispersal patterns in basins of marine and lacustrine origin linked to a single hinterland area, and highlights the nature of the relationship between relay ramp/transfer zone development and sediment dispersal patterns in the subsurface.     

A Relational Model of Workplace Victimization: Social Roles and Patterns of Victimization in Dyadic Relationships.

This article proposes a model of the ways in which dyadic interactions between employees who occupy 1 of 4 archetypal social roles in organizations can lead to either episodic or institutionalized patterns of victimization. The model shows how the occurrence of victimization involving these 4 role types is influenced by organizational variables such as power differences, culture, and access to social capital. The model integrates behavioral and social structural antecedents of victimization to develop a relational perspective on the dynamics of harmful behavior in the workplace. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

„Patriot“

Ohne Zusammenfassung     

OC-48、OC-192芯片和系统设计师面临挑战

当今，从事OC-48、OC-192技术的设计师在设计基于因特网协议(IP协议)的下一代系统时，因系统含有诸如ASIC、网络处理器(NP)、高速跟踪器等元件，以及分组SONET物理层(PoS-PHY)接口规范等的演变，而一直面临挑战。抖动和扭斜失真等现象的存在给诸如系统分组接口第4层(SPI-4)和通用交换接口(CSIX)等总线结构本已拥挤的时序容限，以及四元数据率静态RAM传送表访问时间带来极大混乱。再加上诸如低压差分信号(LVDS)、高速收发逻辑和短线串行终端逻辑等超低电压峰-峰信号技术的引入，使数据出错的可能性变得异常之高。而利用仿真技…     

Some Aspects of Binding GKS to C++

Aspects of a prototype binding of GKS to the C++ programming language are presented. The binding makes use of classes and derived classes to define GKS concepts such as segments and workstations. Operator overloading is used for some GKS Functions.     

Effects of manufacturing defects on the mechanical properties of carbon fibre reinforced polyethersulphone laminates

The effects of defects on the mechanical properties of carbon fibre reinforced polyethersulphone laminates have been measured. The defects studied were cut fibre plies, omission of polymer films and local delamination produced by the inclusion of foreign matter. Of these it was found that only cut plies had a significant detrimental effect on the strength of a laminate. For specimens with two cut plies, the failure stress, tensile, flexural and compressive in the remaining continuous plies was the same as in the defect-free material, provided that the cut plies were widely separated. However the failure stresses were 15–18% lower in the continuous plies in the specimens containing two cut plies which were more closely spaced and in specimens containing four cut plies.     

SIMULATION STUDIES OF THE REMOVAL OF WATER FROM ETHANOL BY A CATALYTIC DISTILLATION PROCESS

A new approach based on catalytic distillation (CD) technology was proposed to remove water from ethanol. Isobutylene was introduced to react with water in the CD column. The commercial software simulation tool Aspen Plus was used to investigate the effects of key design factors such as operating pressure and temperature, reactant ratios, reflux and distillate to feed ratios, number of separation and reaction stages, and feed and reaction zone location. It was found that the CD technology offers potential advantages of reduced energy consumption and reduced capital cost over traditional approaches for the removal of water from ethanol.     

Meßtechnik zur Charakterisierung von Gas/Flüssigkeits-Reaktoren

Measuring techniques for characterizing gas/liquid reactors . The article considers measuring techniques for the characterization of the phases in gas/liquid reactors. These include the velocity profile and turbulence in the continuous phase as well as holdup, size, and velocity of the dispersed phase. Also, methods for the determination of the specific interfacial area and the volumetric mass transfer coefficients are discussed. Measuring methods have made enormous advances in recent years. In spite of this, there is a lack of reliable methods, especially for use during reactions without disturbing the state of the reactor. It is suspected that probe technique will gradually fall into disuse and more and more attention will be focussed on contractless methods. This calls for further development of ultrasonic methods and methods relying on emission of light.