A system for recording geomagnetically induced currents in neutrals of power autotransformers

A digital system for recording quasi-direct currents that arise in neutrals of autotransformers under the action of magentospheric disturbances (frequency range is 0–2 Hz) intended to perform synchronous measurements on several power substations is described. Methods of measuring, primary handling, and transmitting the measuring information from data acquisition stations to a remote central server by using a cellular channel are considered. Schematic diagrams of the units and examples of measurement results, compared with variations of the geomagnetic field, are given.     

The electronic band structure of InN,InAs and InSb compounds

The electronic band structure of InN, InAs and InSb has been investigated by ETB. The ETB method has been formulated for sp³d² basis and nearest neighbor interactions of the compounds and its energy parameters have been derived from the results of the present first principles calculations carried on InN, InAs and InSb. It has been found that the present ETB parameters can produce the band structure of the compounds successfully.     

Adaptation is automatic

Two experiments were used to test whether selective adaptation for speech occurs automatically or instead requires attentional resources. A control condition demonstrated the usual large identification shifts caused by repeatedly presenting an adapting sound (/wa/, with listeners identifying members of a /ba/-/wa/ test series). Two types of distractor tasks were used: (1) Subjects did a rapid series of arithmetic problems during the adaptation periods (Experiments 1 and 2), or (2) they made a series of rhyming judgments, requiring phonetic coding (Experiment 2). A control experiment (Experiment 3) demonstrated that these tasks normally impose a heavy attentional cost on phonetic processing. Despite this, for both experimental conditions, the observed adaptation effect was just as large as in the control condition. This result indicates that adaptation is automatic, operating at an early, preattentive level. The implications of these results for current models of speech perception are discussed.     

Removal of Remazol Brilliant Blue R dye from aqueous solutions by adsorption onto immobilized Scenedesmus quadricauda: Equilibrium and kinetic modeling studies

The green algae Scenedesmus quadricauda was immobilized in alginate gel beads. The immobilized active (IASq) and heat inactivated S.quadricauda (IHISq) were used for the removal of Remazol Brilliant Blue R (CI 61200, Reactive Blue 19, RBBR) from aqueous solutions in the concentration range 25-200 mg L^− 1. At 150 mg L^− 1 initial dye concentration the IASq and IHISq exhibited the highest dye uptake capacity at 30 °C, at the initial pH value of 2.0. At the same initial dye concentration in the batch system the adsorption capacity was determined for IASq as 44.2; 44.9 and 45.7 mg g^− 1 in 30, 60 and 300 min, respectively. After 300 min the adsorption capacity hardly changed during the adsorption time. The IHISq of adsorption capacity was observed as 47.6; 47.8 and 48.3 mg g^− 1 in 30, 60 and 300 min, respectively. After 300 min the adsorption capacity was not changed for 24 h. The Langmuir, Freundlich, Temkin, Dubinin-Radushkevich and Flory-Huggins isotherm models were used to fit the equilibrium biosorption data. The Langmuir, Freundlich and Dubinin-Radushkevich equations have better coefficients than Temkin and Flory-Huggins equation describing the RBBR dye adsorption onto IASq and IHISq. The monomolecular biosorption capacity of the biomass was found to be 68 and 95.2 mg g^− 1 for IASq and IHISq, respectively. From the Dubinin-Radushkevich model, the mean free energy was calculated as 6.42-7.15 kJ mol^− 1 for IASq and IHISq, indicating that the biosorption of dye was taken place in physical adsorption reactions. The experimental data were also tested in terms of kinetic characteristics and it was determined that the biosorption process of dye was well explained with pseudo-second-order kinetics.     

A beam position measurement system of fully digital signal processing at SSRF

This fully digital beam position measurement instrument is designed for beam position monitoring and machine research in Shanghai Synchrotron Radiation Facility. The signals received from four position-sensitive detectors are narrow pulses with a repetition rate up to 499.654 MHz and a pulse width of around 100 ps, and their dynamic range could vary over more than 40 dB in machine research. By the employment of the under-sampling technique based on high-speed high-resolution A/D conversion, all the processing procedure is performed fully by the digital signal processing algorithms integrated in one single Field Programmable Gate Array. This system functions well in the laboratory and commissioning tests, demonstrating a position resolution (at the turn by turn rate of 694 kHz) better than 7 μm over the input amplitude range of -40 dBm to 10 dBm which is well beyond the requirement.     

When consensus meets self-stabilization

This paper presents a shared-memory self-stabilizing failure detector, asynchronous consensus and replicated state-machine algorithm suite, the components of which can be started in an arbitrary state and converge to act as a virtual state-machine. Self-stabilizing algorithms can cope with transient faults. Transient faults can alter the system state to an arbitrary state and hence, cause a temporary violation of the safety property of the consensus. Started in an arbitrary state, the long lived, memory bounded and self-stabilizing failure detector, asynchronous consensus, and replicated state-machine suite, presented in the paper, recovers to satisfy eventual safety and eventual liveness requirements. Several new techniques and paradigms are introduced. The bounded memory failure detector abstracts away synchronization assumptions using bounded heartbeat counters combined with a balance–unbalance mechanism. The practically infinite paradigm is introduced in the scope of self-stabilization, where an execution of, say, 2⁶⁴ sequential steps is regarded as (practically) infinite. Finally, we present the first self-stabilizing wait-free reset mechanism that ensures eventual safety and can be used to implement efficient self-stabilizing timestamps that are of independent interest.