Nondestructive readout mode static induction transistor (SIT) photosensors

The nondestructive readout (NDRO) performance of two static induction transistor (SIT) photosensors, a 40×40 pixel area array and a 140-b linear array, is examined. NDRO operation in the SIT sensors is demonstrated by imaging with the area array and by examining the output waveform of the linear array. The charge lost per NDRO cycle in the linear array was 0.014% near the saturation signal level, and no charge loss could be detected at the ⩽0.5 saturation level. NDRO performance in the area array was degraded compared to the linear array, due to the larger value of the load capacitance connected to the output electrode of the SIT. NDRO operation also enables the cancellation of both the photosite reset noise and the signal nonuniformity by subtracting the first NDRO output from the following NDRO outputs, as well as the advantage of monitoring the signal state during the integration period     

Time-space method for multidimensional melting and freezing problems

In this paper, the time–space method (TSM) for multidimensional melting and solidification problems is proposed. In the proposed TSM, the timewise co-ordinate is incorporated into one of the spatial co-ordinates, thereby transforming the usual transient 2-D (or 3-D) problems into steady 3D (or 4-D) boundary-value problems. Since time integration is not necessary, the TSM has a feature that eliminates the so-called numerical instability which has been a great concern in the principal numerical methodologies in the past. That is, no error propagation in the timewise direction occurs in the TSM calculation. The TSM is applicable to almost all transient heat transfer and flow problems. The computer running time will be reduced to only 1/100th–1/1000th of the existing schemes for 2-D or 3-D problems. The sample calculations are presented for a 2-D melting problem in a square cavity and the validity of the present method is examined.     

Elevated serum lipoprotein (a) levels associated with ulcerative colitis in a young Japanese patient

Thromboembolism has been shown to play a role in the pathogenesis of inflammatory bowel disease (IBD). A possibility exists that lipoprotein (a) [Lp(a)], a newly-discovered prothrombotic factor, also participates in the development of at least some cases of IBD. Marked elevation of serum Lp(a) levels was observed in a young patient with ulcerative colitis. A biopsy specimen of the rectal mucosa showed findings compatible with ulcerative colitis, as well as small vessel thrombus occurring within the muscularis mucosa in the rectum. Serum Lp(a) levels were markedly elevated on admission (71 mg/dl), with a gradual decrease to 46 mg/dl on discharge. Moreover, serum Lp(a) levels decreased in parallel with clinical improvement. In the quiescent clinical stage, no small vessel thrombus was observed in the mucosa on follow-up colonoscopy. The association between IBD and hyper-Lp(a)-emia would be presumable but it has been, to our knowledge, previously unreported. The case reported here would be the first young patient, suggesting the presence of hyper-Lp(a)-emia and small vessel thrombus formation occurring in association with the development of ulcerative colitis.     

Synthesis of Metastable Tetragonal (t') Zirconia–Ceria Solid Solutions by the Polymerized Complex Method

Homogeneous metastable tetragonal ( t ') solid solutions of ZrO₂— x mol% CeO₂ ( x = 20 and 50) were successfully synthesized by the organic polymerized complex method. The citric acid-ethylene glycol solution containing Zr and Ce ions was polymerized at about 140°C and then heat-treated at about 350°C to obtain a precursor. The black precursor was heated at 450°C and then fired up to 1300° or 1590°C, resulting in the homogeneous solid solutions.     

Single-crystal growth and characterization of Cu2O and CuO

We have prepared a large number of crystals of cuprous oxide (Cu2O) by various procedures. Photoluminescence spectra of these crystals were studied to examine the concentration of defects, especially copper vacancy VCu to seek favourable conditions for growing Cu2O crystal. High-quality single crystals of Cu2O were prepared by the floating-zone melting method in air. Several synthetic crystals (specimens FA, FZ and GZ) and also a natural crystal were studied by X-ray analysis, inductively coupled plasma spectroscopy analysis, optical absorption, photoluminescence, photoconductivity and cyclotron resonance absorption, photoluminescence, photoconductivity and cyclotron resonance absorption to characterize their optical and electrical qualities. The best values of mobility and scattering time of photocarriers at T = 4.2 K are estimated to be h1.8 × 105 cm2 V–1 s–1 and h60 ps for positive holes, and 1.3 × 105 cm2 V–1 s–1 and 70 ps for electrons in Cu2O. Further, we report preliminary experimental results on transport property of crystals also of cupric oxide (CuO) purified by the floating-zone melting method.     

Lyapunov function-based obstacle avoidance scheme for a two-wheeled mobile robot

An obstacle avoidance scheme of a two-wheeled mobile robot is shown by selecting an appropriate Lya- punov function. When considering the obstacle, the Lyapunov function may have some local minima. A method which erases the local minima is proposed by using a function which covers the minima with a plane surface. The effectiveness of the proposed method is verified by numerical simulations.     

An application of the 2-nitrobenzenesulfenyl method to proteomic profiling of human colorectal carcinoma: A novel approach for biomarker discovery

In the development of novel biomarkers, the proteomic approach is advantageous because using it the cancer-associated proteins can be directly identified. We previously developed a 2-nitrobenzenesulfenyl (NBS) method to improve quantitative proteome analysis. Here, we applied this method to proteomic profiling of colorectal carcinoma (CRC) to identify novel proteins with altered expression in CRC. Each pair of tumor and normal tissue specimens from 12 CRC patients was analyzed, and approximately 5000 NBS-labeled paired peaks were quantified. Peaks with altered signal intensities (>1.5-fold) and occurring frequently in the samples (>70%) were selected, and 128 proteins were identified by MS/MS analyses as differentially expressed proteins in CRC tissues. Many proteins were newly revealed to be CRC related; 30 were reported in earlier studies of CRC. Six proteins that were up-regulated in CRC (ZYX, RAN, RCN1, AHCY, LGALS1, and VIM) were further characterized and validated by Western blot and immunohistochemistry. All six were found to be CRC-localized, either in cancer cells or in stroma cells near the cancer cells. These results indicate that the proteins identified in this study are novel candidates for CRC markers, and that the NBS method is useful in proteome mining to discover novel biomarkers.     

Route guidance by a car navigation system based on augmented reality

Car navigation systems play a prominent role in road traffic safety and traffic regulation. However, it is necessary to improve the route guidance of car navigation systems so that they accurately and quickly recognize small differences in location. Thus, to increase the ease of understanding and safety of car navigation systems, navigation systems based on augmented reality have been proposed for providing guidance at road intersections. We are currently developing a car navigation system based on augmented reality, called AR‐Navi. We investigated designs for the display of road intersection guidance that can be easily understood even when limited information is available and proposed a “best shot” display method that does not use moving images. In addition, we implemented a prototype system that includes these methods and conducted driving experiments on public roads to evaluate the ease of understanding and safety of AR‐Navi. Using the evaluation results, we confirmed that the ease of understanding and safety is similar in the case of AR‐Navi and CG‐Navi. We also clarified the characteristics of AR‐Navi. © 2012 Wiley Periodicals, Inc. Electr Eng Jpn, 180(2): 43–54, 2012; Published online in Wiley Online Library (wileyonlinelibrary.com). DOI 10.1002/eej.22278     

One-step route to a hybrid TiO2/TixW1?xN nanocomposite by in situ selective carbothermal nitridation

Metal oxide/nitride nanocomposites have many existing and potential applications, e.g. in energy conversion or ammonia synthesis. Here, a hybrid oxide/nitride nanocomposite (anatase/Ti_xW_1−xN) was synthesized by an ammonia-free sol–gel route. Synchrotron x-ray diffraction, complemented with electron microscopy and thermogravimetric analysis, was used to study the structure, composition and mechanism of formation of the nanocomposite. The nanocomposite contained nanoparticles (<5 nm diameter) of two highly intermixed phases. This was found to arise from controlled nucleation and growth of a single oxide intermediate from the gel precursor, followed by phase separation and in situ selective carbothermal nitridation. Depending on the preparation conditions, the composition varied from anatase/Ti_xW_1−xN at low W content to an isostructural mixture of Ti-rich and W-rich Ti_xW_1−xN at high W content. In situ selective carbothermal nitridation offers a facile route to the synthesis of nitride-oxide nanocomposites. This conceptually new approach is a significant advance from previous methods, which generally require ammonolysis of a pre-synthesized oxide.