Additives distribution and electrical properties in zinc oxide varistor prepared by a wet chemical method

Cobalt-, praseodymium-added zinc oxide varistor was prepared through a wet chemical method followed by sintering with or without calcination. Changes in grain size, compact density, additives distribution, and voltagecurrent/ capacitance-voltage relations were investigated for the characterization of the samples sintered at temperatures from 1473 to 1573 K without calcination or with calcination at 773 K for 2 h. The electrical properties were compared with nhose of samples prepared by two types of ball mill methods. The wet chemical method provided almost the same additives-distribution profile and less impurities in comparison with the ball grinding method carried out for 10–100 h. The donor concentration and the potential-barrier height for the samples were evaluated by Double Schottky Barrier Model. Addition of small amount of both cobalt and praseodymium in preparation by the wet chemical method was effective for a better nonlinearity relation between voltage and current, which has potential for a smaller sized varistor.     

Simulink behavioral modeling of a 10-bit pipelined ADC

The increasing architecture complexity of data converters makes it necessary to use behavioral models to simulate their electrical performance and to determine their relevant data features. For this purpose, a specific data converter simulation environment has been developed which allows designers to perform time-domain behavioral simulations of pipelined analog to digital converters (ADCs). All the necessary blocks of this specific simulation environment have been implemented using the popular Matlab simulink environment. The purpose of this paper is to present the behavioral models of these blocks taking into account most of the pipelined ADC non-idealities, such as sampling jitter, noise, and operational amplifier parameters (white noise, finite DC gain, finite bandwidth, slew rate, and saturation voltages). Simulations, using a 10-bit pipelined ADC as a design example, show that in addition to the limits analysis and the electrical features extraction, designers can determine the specifications of the basic blocks in order to meet the given data converter requirements.     

ANN modeling of a smart MEMS-based capacitive humidity sensor

This paper presents a design of a smart humidity sensor. First we begin by the modeling of a Capacitive MEMS-based humidity sensor. Using neuronal networks and Matlab environment to accurately express the non-linearity, the hysteresis effect and the cross sensitivity of the output humidity sensor used. We have done the training to create an analytical model CHS “Capacitive Humidity Sensor”. Because our sensor is a capacitive type, the obtained model on PSPICE reflects the humidity variation by a capacity variation, which is a passive magnitude; it requires a conversion to an active magnitude, why we realize a conversion capacity/voltage using a switched capacitor circuit SCC. In a second step a linearization, by Matlab program, is applied to CHS response whose goal is to create a database for an element of correction “CORRECTOR”. After that we use the bias matrix and the weights matrix obtained by training to establish the CHS model and the CORRECTOR model on PSPICE simulator, where the output of the first is identical to the output of the CHS and the last correct its nonlinear response, and eliminate its hysteresis effect and cross sensitivity. The three blocks; CHS model, CORRECTOR model and the capacity/voltage converter, represent the smart sensor.     

SrO capping effect for La2O3/Ce-silicate gate dielectrics

The chemical bonding states and electrical characteristics of SrO capped La₂O₃/CeO_x gate dielectric have been examined. Angle-resolved X-ray photoelectron spectroscopy measurement has revealed that Sr atoms diffuse into silicate layer to form SrLa-silicate after annealing. Owing to the incorporation of Sr atoms into silicate layer, a transistor operation with an equivalent oxide thickness (EOT) below 0.5 nm has been demonstrated. A strongly degraded effective electron mobility of 78 cm²/V s at 1 MV/cm has been obtained, which fit well with the general trend in small EOT range below 1 nm. Although process optimization is needed to improve the performance of transistors, Sr capping technique can be useful for EOT scaling.     

A new method of accurate polarization measurement on isobaric analog resonance to detect parity non-conservation effect

For the study of parity mixing in the compound states, a method to measure the longitudinal analyzing power A_z of the isobaric analog resonance (IAR) as a function of energy in the proton elastic scattering is discussed. A thick target is used and energy loss of the protons in the target is utilized to measure the energy dependence. The energy resolution is presented and the sources of the systematic errors in A_z are discussed together with the way of their elimination. The method has been shown to be quite efficient for deriving both the transverse and the longitudinal analyzing powers. The measurement of A_z for the s-wave IAR at E_cm=5.86 MeV in ⁹⁰Zr(p,p) and the analysis to derive PNC matrix elements are described.     

Monodisperse and 1D Cross-Linked Multi-branched Cu @ Ni Core–Shell Particles Synthesized by Chemical Reduction

We report on a two-step wet chemical route for producing Cu@Ni core–shell particles with multiple needle-like branches on the surface. Using the usual synthesis process, urchin-like Ni shells were formed on the surface of spherical Cu cores and monodisperse particles were obtained. Under the direction of a static magnetic field, one-dimensional, well-aligned Cu@Ni particles were assembled through cross-linking the branched Ni shells. The monodisperse Cu@Ni particles show stable and uniform field electron emission, having a low turn-on field of 3.3 V/μm and a large current density of 1 mA/cm² under an applied field of about 5.33 V/μm.     

Identification of three isoforms for the Na+-dependent phosphate cotransporter (NaPi-2) in rat kidney

We have isolated three unique NaPi-2-related protein cDNAs (NaPi-2alpha, NaPi-2beta, and NaPi-2gamma) from a rat kidney library. NaPi-2alpha cDNA encodes 337 amino acids which have high homology to the N-terminal half of NaPi-2 containing 3 transmembrane domains. NaPi-2beta encodes 327 amino acids which are identical to the N-terminal region of NaPi-2 containing 4 transmembrane domains, whereas the 146 amino acids in the C-terminal region are completely different. In contrast, NaPi-2gamma encodes 268 amino acids which are identical to the C-terminal half of NaPi-2. An analysis of phage and cosmid clones indicated that the three related proteins were produced by alternative splicing in the NaPi-2 gene. In a rabbit reticulocyte lysate system, NaPi-2 alpha, beta, and gamma were found to be 36, 36, and 29 kDa amino acid polypeptides, respectively. NaPi-2alpha and NaPi-2gamma were glycosylated and revealed to be 45- and 35-kDa proteins, respectively. In isolated brush-border membrane vesicles, an N-terminal antibody was reacted with 45- and 40-kDa, and a C-terminal antibody was reacted with 37-kDa protein. The sizes of these proteins corresponded to those in glycosylated forms. A functional analysis demonstrated that NaPi-2gamma and -2alpha markedly inhibited NaPi-2 activity in Xenopus oocytes. The results suggest that these short isoforms may function as a dominant negative inhibitor of the full-length transporter.     

Increased technetium-99m-GSA uptake per hepatocyte in rats with administration of dimethylnitrosamine or hepatocyte growth factor

Technetium-99m-diethylenetriaminepentaacetic acid-galactosyl-human serum albumin (GSA) is a new scintigraphic agent that binds specifically to asialoglycoprotein receptors on hepatocytes, and can be used to evaluate hepatic function. Asialoglycoprotein receptor is a hepatocellular membrane receptor responsible for the endocytosis of asialoglycoproteins, and the function of this receptor is affected in various disease states. The aim of this study was to investigate GSA uptake per hepatocyte in the convalescent stage from hepatic damage. METHODS: We used rats with dimethylnitrosamine (DMN)-induced hepatic injury and rats with recombinant human hepatocyte growth factor (rhHGF) stimulation. Plasma clearance of GSA and the number of hepatocytes in whole liver were calculated. RESULTS: In the DMN-treated rats, the total number of hepatocytes and GSA plasma clearance were reduced significantly at 3 wk after the final administration of DMN. However, calculated GSA uptake per individual hepatocyte was significantly greater by 53.2% than in the normal controls. The area of hepatic nucleus was also significantly greater than in the normal controls. In the rhHGF-treated rats, an increase in the total number of hepatocytes was not demonstrated on the final day of rhHGF administration (Day 4). However, calculated GSA uptake per hepatocyte was significantly greater (59%) than in the controls. CONCLUSION: Augmented GSA uptake per hepatocyte during the convalescent stage after hepatic injury suggests a cellular compensation to the decreased number of hepatocyte. This mechanism may be caused by the secretion of some hepatotropic factors such as HGF.     

Energy storage system utilizing large‐capacity electric double‐layer capacitors for peak‐cut of power demand

Recently, due to a rapid increase of demand for air conditioning in summer, peak power demand is becoming increasingly acute. Therefore, the load factor has a tendency to drop every year. The drop of the load factor is leading to a drop in the utilization factor of the power facilities and an increase in the cost of installation. In this paper, we propose an energy storage system for peak‐cut of power demand, in which we use large‐capacity electric double‐layer capacitors. This energy storage system has some distinctive characteristics, including long life span, maintenance‐free operation, preservation of environment, high efficiency at charge/discharge, and so on. This paper deals with the circuit arrangement of the proposed energy storage system, the charge equalization method of the capacitors, and the control method of the converter at charge/discharge. Finally, the operating characteristics of this system are evaluated by simulation analysis. © 2000 Scripta Technica, Electr Eng Jpn, 133(3): 83‐92, 2000     

A model for the structure and growth of carbon nanofibers synthesized by the CVD method using nickel as a catalyst

Carbon nanofibers were synthesized at 450-800 °C by the catalytic CVD method using alumina plate-supported nickel as catalyst and acetylene as carbon source. It was found that Ni/alumina catalyst exhibited a large catalytic effect on the growth of carbon nanofibers at the temperatures between 550 and 700 °C. TEM observation revealed that most of the carbon nanofibers synthesized at 550 °C had a coil-like shape, and many thick platelet nanofibers were found in the product at 700 °C. A growth model was proposed to explain the structural diversity of the carbon nanofibers. Although the carbon nanofibers showed low crystallinity, they can be easily graphitized at 2500 °C.