Chromophore-Free Sealing and Repair of Soft Tissues Using Mid-Infrared Light-Activated Biosealants

Poor strength, infection, leakage, long procedure times, and inflammation limit the efficacy of common tissue sealing devices in surgeries and trauma. Light-activated sealing is attractive for tissue sealing and repair, and can be facilitated by the generation of local heat following absorption of nonionizing laser energy by chromophores. Here, the inherent ability of biomaterials is exploited to absorb nonionizing, mid-infrared (midIR) light in order to engender rapid photothermal sealing and repair of soft tissue wounds. In this approach, the biomaterial simultaneously acts as a photothermal convertor as well as a biosealant, which dispenses the need for exogeneous light-absorbing nanoparticles or dyes. Biomechanical recovery, mathematical modeling, histopathology analyses, tissue strain mapping using digital imaging correlation, and visualization of the biosealant-tissue interface using hyperspectral imaging indicate superior performance of midIR sealing in live mice compared to conventional sutures and glue. The midIR-biosealant approach demonstrates rapid sealing of soft tissues, improves cosmesis, lowers potential for scarring, obviates safety concerns because of the nonionizing light used, and allows adoption of a wide diversity of biomaterials. Taken together, the studies demonstrate a novel advance both in biomaterials for surgical sealing along with the use of nonionizing midIR light, with high potential for clinical translation.     

Computer Aided Tolerance assignment

Tolerances are basic to the production of every part. This is because perfect parts cannot be produced with existing processes and machines. The determination of tolerances for the individual parts of a functional assembly is critical, but not trivial. Numerous approaches are suggested in past literature for (analytical) tolerance allocation. With the advent of total automation, more attempts are being made to computerize manual design tasks. Tolerance design, assignment and allocation can also be fully automated if the assembly function can be estimated by the computer.

In the present paper, an attempt is made to computerize tolerance assignment. A simple example of a two piece assembly, viz., a fit, is used to demonstrate the developed methodology. A feature extraction is first performed from both detail and assembly drawings. Then, probable assembly interfaces are determined using a rule based procedure. Consequently, tolerances are assigned to the basic dimensions of each feature and to the assembly interfaces using a tolerance database and user interaction. More complex analysis for tolerance allocation is also under study.     

Features of ultrasonic wave propagation to identify defects in composite materials modelled by finite element method

A two-dimensional plane strain finite element model with absorbing boundary condition has been developed to investigate the ultrasonic wave propagation in isotropic and orthotropic media. It is capable of simulating the experimental pulse echo technique to obtain A-scan data, when a short duration pulse is transmitted into a domain with or without a flaw. The flaw can either be a crack or an inclusion of different material such as a Teflon insert or a resin rich zone. After performing FFT on the A-scan data, frequency domain feature analysis is done. The study provides a guideline regarding the suitability of certain harmonics sensitive to certain types of flaw. The simulation shows other important artifacts of wave propagation such as mode conversion and scattering due to the presence of flaws.     

Structural and electrical measurements of CdZnSe composite

TheI—Vcharacterization and the electrical resistivity of selenium rich Se₈₅Cd_15-xZn_x (x = 0, 3, 7, 11 and 15) system at room temperature have been studied. Samples were obtained using melt cooling technique. So prepared samples were then characterized in terms of their crystal structure and lattice parameter using X-ray diffraction method. The materials were found to be poly crystalline in nature, having zinc blend structure over the whole range of zinc concentration. The measurements ofI—V bdcharacteristics have been carried out at different temperatures from room to 140°C. The electrical resistivity of the samples with composition at room temperature has been found to vary between maximum 2.7 x 10⁸ Ωm and minimum 7.3 x 10⁵ Ωm and shows a maximum at 3 at. wt.% of Zn. The carrier activation energy of the samples with composition has also been determined and found to vary from 0.026 eV to 0.111 eV.     

Deceleration of a porous rotating disk in a viscous fluid

The flow due to a rotating disk decelerating with an angular velocity inversely proportional to time with either surface suction (or injection) which again varies with time is investigated. The unsteady Navier-Stokes equations are transformed to non-linear ordinary differential equations using similarity transformations. The resulting equations are solved numerically using a globally convergent homotopy method. The flow depends on two non-dimensional parameters, namely an unsteadiness parameter $\text{S}$ and a suction (or injection) parameter $\text{A}$. Some interesting numerical results are presented graphically and discussed.     

Meprin A, the major matrix degrading enzyme in renal tubules, produces a novel nidogen fragment in vitro and in vivo

We examined the effect of meprin A, the major matrix degrading metalloproteinase in rat kidney, on the laminin-nidogen complex. N-terminal sequence information from the most abundant 55 kDa fragment revealed that it was a breakdown product of nidogen rather than laminin. In comparison with over 50 nidogen cleavage sites produced by other proteases, the meprin A-induced nidogen cleavage site at amino acid position 899-900, a glutamine-glycine site in the G3 domain, is unique. In addition, these data demonstrate that meprin A degrades the G3 domain of nidogen even in the presence of laminin binding, which usually accords protection from proteolytic degradation. Meprin A also degraded purified nidogen into similar breakdown products. Given that the tubular basement membrane is located on the basilar side of the cell, the location of meprin A on the apical brush border makes it difficult to envision a role for meprin A in injury-induced basement membrane component breakdown. Thus, we examined the possibility that following renal tubular epithelial cell injury, meprin A undergoes a translocation to reach the underlying basement membrane. After renal ischemia-reperfusion there was a marked alteration in meprin A staining with meprin A now distributed throughout the renal tubular cell cytoplasm and directly adherent to the tubular basement membrane. This was in contrast to the usual linear staining of the brush border of tubules in the corticomedullary junction. These data provide unequivocal evidence that following injury, meprin A undergoes redistribution and/or adherence to the tubular basement membrane. Since in our in vitro studies, we identified a distinct meprin-induced 55 kDa nidogen breakdown product, the urine was also examined for the presence of nidogen degradation products after rat renal ischemia-reperfusion injury. Western blots showed a marked increase in the urinary 55 kDa nidogen fragment as early as the first day following ischemia-reperfusion injury and continuing for six days. Taken together, these in vivo data strongly support the notion that the nidogen breakdown products are the result of partial degradation of tubular basement membrane by meprin A following renal tubular ischemia-reperfusion injury.     

Low-K Dielectric Pocket and Workfunction Engineering for DC and Analog/RF Performance Improvement in Dual Material Stack Gate Oxide Double Gate TFET

Silicon - In this paper, we investigate the effect of low K dielectric pocket on DC and analog/RF performance in dual material stack gate oxide double gate tunnel field effect transistor. For this,...     

Methacrylic acid and dodecyl methacrylate (MAc‐DMA) hydrogel for enhanced catalytic activity of lipase of Bacillus coagulans MTCC‐6375

An alkaline thermotolerant bacterial lipase of Bacillus coagulans MTCC‐6375 was purified and immobilized on a methacrylic acid and dodecyl methacrylate (MAc‐DMA) hydrogel. The lipase was optimally bound to the matrix after 20 min of incubation at 55°C and pH 9 under shaking conditions. The matrix‐bound lipase retained approximately 50% of its initial activity at 70–80°C after 3 h of incubation. The immobilized lipase was highly active on medium chain length p‐nitrophenyl acyl ester (C: 8, p‐nitrophenyl caprylate) than other p‐nitrophenyl acyl esters. The presence of Fe³⁺, NH₄⁺, K⁺, and Zn²⁺ ions at 1 mM concentration in the reaction mixture resulted in a profound increase in the activity of immobilized lipase. Most of the detergents partially reduced the activity of the immobilized lipase. The immobilized lipase performed ～62% conversion in 12 h at temperature 55°C. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1420–1426, 2006