End‐Capping as a Method for Improving Carrier Injection in Electrophosphorescent Light‐Emitting Diodes

The electronic properties, carrier injection, and transport into poly(9,9‐dioctylfluorene) (PFO), PFO end‐capped with hole‐transporting moieties (HTM), PFO–HTM, and PFO end‐capped with electron‐transporting moieties (ETM), PFO–ETM, were investigated. The data demonstrate that charge injection and transport can be tuned by end‐capping with HTM and ETM, without significantly altering the electronic properties of the conjugated backbone. End‐capping with ETM resulted in more closely balanced charge injection and transport. Single‐layer electrophosphorescent light‐emitting diodes (LEDs), fabricated from PFO, PFO–HTM and PFO–ETM as hosts and tris[2,5‐bis‐2′‐(9′,9′‐dihexylfluorene)pyridine‐κ²NC_3′]iridium(III ), Ir(HFP)₃ as the guest, emitted red light with brightnesses of 2040 cd m^–2, 1940 cd m^–2 and 2490 cd m^–2 at 290 mA cm^–2 (16 V) and with luminance efficiencies of 1.4 cd A^–1, 1.4 cd A^–1 and 1.8 cd A^–1 at 4.5 mA cm^–2 for PFO, PFO–HTM, and PFO–ETM, respectively.     

Transcutaneous balloon angioplasty in the treatment of subclavian steal syndrome. Characteristics of vertebral basal flow with transcranial Doppler technique

Subclavian steal syndrome (SSS) appears when the origin of the subclavian artery (SA) is occluded or stenosed. Introduction of transcranial Doppler sonography (TCD) provided an opportunity to evaluate parameters of the blood flow in the vertebral (VA) and basilar artery (BA). Measurements of blood flow velocities performed at rest and after the brachial hyperemia test allow one to classify hemodynamic types of SSS. The aim of the study was to categorize types of steal and to compare the differences of flow patterns before and after percutaneous transluminal SA balloon angioplasty (SA-PTA). Fourty-eight patients with angiographically confirmed SSS (aged from 27 to 68 years, mean 53; 2/1 f/m ratio) were examined with 2 MHz range-gated, pulsed transcranial Doppler device (TC 2-64B EME). Both VA and BA were evaluated by the transoccipital approach at rest and during the brachial hyperemia. In 5 cases (10.4%) permanent reversal blood flow in the BA was observed (complete basilar steal). In flow in the BA blood flow was in the normal direction at rest and altered (reversed or decreased) when induced with brachial hyperemia test (transient basilar steal). In the next 14 patients (29.2%) permanently reversed VA blood flow was observed with only a slight or no alterations of the BA flow after the hyperemia test (complete vertebral steal). In the last 19 cases (39.6%) alterations of the VA blood flow without changes in BA flow were observed (latent vertebral steal). Between 1991 and 1994 twenty seven symptomatic patients with different hemodynamic types of SSS were treated with SA-PTA. TCD evaluation of VA's and BA using the hyperemia test was performed before, 3 to 7 days and 3 months after morphologically and hemodynamically successful subclavian artery balloon PTA. Normal results of vertebrobasilar examinations were obtained in 26 cases after this procedure. In one case the latent vertebral steal was detected. The 28 months mean follow-up revealed no significant changes in TCD flow patterns recorded from VA's and BA. After collecting data of about 60 patients with SSS we examined with TCD we conclude that: in patients with a hemodynamically significant SA stenosis the presence of reversed ipsilateral VA blood flow (a radiologic steal) its not a good determinant of either the presence or type of presenting symptoms and after successful PTA or recanalisation and PTA of SA in almost all cases we examined close to normal TCD recordings in BA and VA.     

Non-contact methods of measuring moisture concentration in external layers of building partitions: III—Water vapour condensation on the cementitious surfaces

This paper presents the results of the larger study into a potential application of laser radiation for the detection of phase transition processes in low temperatures occurring on the surface layers of cementitious materials. An attempt was made to identify relationships between the environmental conditions—temperature and air humidity, and the selected parameters of the reflected light. Onset of the condensation process and formation of water microdrops on the surface of the material leads to the phase displacement of individual laser rays, which are represented by different speckle images.

Although the analysis of parameters of the reflected light are very difficult in the case of porous materials because of highly developed roughness of the surface structure it has been proved that a dynamic study of the phase transition phenomena can be successfully carried out without mechanical intervention.     

Non-contact methods of measuring moisture concentration in external layers of building partitions II—Monitoring of the water vapour condensation on porous surfaces

This paper present the results of the investigation into a potential application of laser radiation for the detection of phase transition processes occurring on the surface layers of porous materials. An attempt was made to discuss in the approximation equations, the relationships between coefficients of the reflected light, the temperature and humidity of the surrounding environment. Laser light reflected from the porous surface carries information about the roughness of the structure. The presence of water microdrop on the surface of the porous material, as a result of condensation and thus a phase transition, leads to the phase displacement of individual rays, which is represented by different images. Therefore, a comprehensive analysis of the reflected light parameters allows a dynamic study of the phase transition phenomena without mechanical intervention.     

ISDN and new services in Poland: opportunities and obstacles

Presents an overview of problems involved in introducing ISDN and new services in the public network of Poland. The technical aspects of the assumed network and services development strategy are considered. The focus is on development alternatives and the process of establishing national requirements for the development     

TSV constraints related to temperature excursion, pressure during molding, materials used and handling loads

The current paper focuses on several mechanical aspects of a waferlevel packaging approach using a direct face-to-face Chip-to-Wafer (C2W) bonding of a MEMS device on an ASIC substrate wafer. Requirements of minimized inherent stress from packaging and good decoupling from forces applied in manufacturing and application are discussed with particular attention to the presence of through-silicon vias (TSV) in the substrate wafer. The paper deals with FEM analysis of temperature excursion, pressure during molding, materials used and handling load influence on mechanical stress within the TSV system and on wafer level, which can be large enough to disintegrate the system.     

Quantitative microstructural characterisation of Fe–30Ni alloy after martensitic transformations by means of stereological and magnetic methods

In the Fe–30Ni alloy investigated a martensitic transformation can occur both during quenching or plastic deformation. Martensite formed during plastic deformation, depending on the thermo-mechanical treatment applied, exhibits a different morphology from that achieved during quenching and forms the so-called composite-like structure. The morphology and volume fraction of martensite depends both on strain and temperature. In the present studies Fe–30Ni alloy was deformed by monotonic rolling in one path and perpendicular rolling in the temperature range M_D–M_S. The aim of the investigations was a determination of martensite volume fraction depending on the strain and temperature. To examine the influence of strain, the alloy was deformed by rolling in one path or perpendicular rolling at a temperature of − 30 °C, in the strain range of 10–30%. The dependence of temperature was investigated by rolling with 30% strain in a temperature range from − 30 °C to − 80 °C. The variants of thermo-mechanical treatment performed enabled us to achieve different martensite morphologies and volume fractions. Microstructural analysis was performed by means of light microscopy and transmission electron microscopy. The results of quantitative microstructural analysis of martensite and retained austenite volume fractions formed in different thermo-mechanical treatments were compared with those obtained by magnetic measurements. The fraction of deformation-induced martensite determined varied from 2% to 86%. The partial volume fractions V_V^MF of martensite formed in different deformation directions were also determined. It was found that the influence of the temperature on the martensite volume fraction is more pronounced than the influence of strain.     

The Effect of Implanted Al and/or Y on the Scale Formation on Low-Al Fe20Cr2Al Alloy

The very early stages of the oxidation of an Fe20Cr2Al alloy, unmodified and ion-implanted by aluminium, yttrium and a combination of both elements, Al and Y, were studied at 1100 °C in oxygen using two-stage-oxidation exposures with ¹⁸O₂ as a tracer and subsequent characterisation of the scales using SIMS analyses of distribution of oxygen isotopes and oxide-related negative ion clusters, SEM observations of the surface morphology and photoluminescence spectroscopy analysis of the phase composition. The scales formed in all cases, except for the Al-implanted alloy, exhibited layered structures, with the outer part comprising Fe- and Cr-rich oxide, and the inner part being Al₂O₃, which grew due to a mixed outward–inward mechanism . The alumina sub-layers contained the transient oxides and α-Al₂O₃. Implanted Al significantly affected the mechanism of the scale growth, providing that the scale consisted essentially of α-Al₂O₃, and grew via a mixed inward-outward mechanism typical for scales on alumina formers.