Transmittance and cathodoluminescence of AlN ceramics sintered with Ca3Al2O6 as sintering additive

Aluminum nitride ceramics were prepared by sintering with 0–4.8 mass% of Ca₃Al₂O₆ (C₃A) as a sintering additive. The transmittance in the range of 260–550 nm increased with increasing amount of C₃A. The cathodoluminescence intensity attributed to oxygen-induced defects decreased with increasing amount of C₃A. From the results, the increase of the transmittance in the range of 260–550 nm was considered to be related to the decrease of the oxygen-induced defect density.     

Preparation of Self-Standing, Submillimeter-Thick Porous Titania Films with Anatase Nanocrystallites Using Evaporation-Induced Self-Assembly

Self-standing transparent submillimeter-thick (∼0.34 mm) mesoporous titania films were prepared using the evaporation-induced self-assembly (EISA) of a triblock copolymer template and titanium tetraethoxide. Performing EISA at low temperature and low humidity improved the transparency and continuity of the films. As synthesized films had a well-defined hexagonal mesostructure and the existence of both amorphous titania and anatase nanocrystallites (2 nm) was confirmed. The films that were calcined at 400°C were composed of anatase nanocrystallites (14–16 nm) and had a BET surface area of 90 m² g⁻¹ with 13-nm pores. The films were characterized using XRD, FE-SEM, TEM, and N² adsorption–desorption measurements. An erratum to this article can be found at     

A 63-year-old man with progressive cauda equina/conus medullaris syndrome

BACKGROUND: This article presents results of the acute treatment phase of a 2-site study comparing cognitive behavioral group therapy (CBGT) and treatment with the monoamine oxidase inhibitor phenelzine sulfate for social phobia. METHODS: One hundred thirty-three patients from 2 sites received 12 weeks of CBGT, phenelzine therapy, pill placebo administration, or educational-supportive group therapy (an attention-placebo treatment of equal credibility to CBGT). The "allegiance effect," ie, the tendency for treatments to seem most efficacious in settings of similar theoretical orientation and less efficacious in theoretically divergent settings, was also examined by comparing responses to the treatment conditions at both sites: 1 known for pharmacological treatment of anxiety disorders and the other for cognitive behavioral treatment. RESULTs: After 12 weeks, phenelzine therapy and CBGT led to superior response rates and greater change on dimensional measures than did either control condition. However, response to phenelzine therapy was more evident after 6 weeks, and phenelzine therapy was also superior to CBGT after 12 weeks on some measures. There were few differences between sites, suggesting that these treatments can be efficacious at facilities with differing theoretical allegiances. CONCLUSIONS: After 12 weeks, both phenelzine therapy and CBGT were associated with marked positive response. Although phenelzine therapy was superior to CBGT on some measures, both were more efficacious than the control conditions. More extended cognitive behavioral treatment and the combination of modalities may enhance treatment effect.     

Effect of Sliding History on Super-Low Friction of Diamond-Like Carbon Coating in Water Lubrication

Water lubrication using diamond-like carbon (DLC) coatings is regarded as being a promising eco-friendly technology. However, it has been reported that delamination of DLC coatings occurs in water. The authors clarified that the application of friction in ambient air prior to self-mating DLC water lubrication, in addition to the suppression of DLC delamination, caused the friction coefficient to decrease more than when no processing is performed in the boundary lubrication region. When compared to the case when there was no pre-sliding, in terms of the wear scar, in this case, a much more hydrophilic and smoother surface was formed. Therefore, the friction-reducing process in water due to the presence of a sliding history (pre-sliding in ambient air) was clarified by an analysis of the DLC geometry, structure, chemical state and an in situ analysis that can measure the friction properties and the chemical state of DLC. We clarified that the process in which the oxidation and structural changes of the DLC proceed at the time of pre-sliding in ambient air using in situ Fourier transform infrared spectroscopy–attenuated total reflection. It was also revealed that the OH termination subsequently accelerated rapidly due to the friction in water after pre-sliding process. In addition, a time-of-flight secondary ion mass spectrometry analysis revealed that this OH group was derived from the lubricating water and unlike the case in which there was no pre-sliding in ambient air, the rate at which OH terminates increased considerably.     

Fabrication of Functionally Graded SiO2‐Mo Material by Centrifugation and Floc‐Casting of Highly Concentrated Slurry

To fabricate functionally graded materials, a highly concentrated slurry of SiO₂‐Mo system was prepared and centrifugal force was applied in an attempt to achieve a graded composition. Subsequently, we formed a homogeneous green body with compositional gradation by floc‐casting at 80°C, which was then fired at 1750°C for 10 min in Ar. The sintered body had compositional ratios of SiO₂ and Mo as well as electrical conductivities that changed gradually along the direction of centrifugal force. The results demonstrate that centrifugation and control of slurry characteristics such as flocculation are effective in fabricating functionally graded SiO₂‐Mo materials.     

Patterning of Non-Linear Optical Crystals in Glass by Laser-Induced Crystallization

This paper reports recent progress in the patterning of non-linear optical crystals on the glass surface by laser irradiation. Two techniques for the writing of crystal lines have been developed, i.e., rare-earth (samarium) atom heat processing and transition metal atom heat processing, in which a continuous wave Nd:YAG laser (wavelength: λ=1064 nm) is irradiated to the glasses containing rare-earth (RE: Sm³⁺, Dy³⁺) ions or transition metal (TM: Ni²⁺, Fe²⁺, V⁴⁺) ions. The writing of crystal lines such as β-BaB₂O₄, Sm _x Bi_{1− x} BO₃, and Ba₂TiGe₂O₈ showing second harmonic generations has been successful. It is clarified from the azimuthal dependence of second harmonic intensity and polarized micro-Raman scattering spectra that crystal lines consist of highly oriented crystals along the crystal line growth direction. It is also possible to write two-dimensional crystal bending or curved lines by just changing the laser scanning direction. The mechanism of the laser-induced crystallization has been proposed.     

19-Allylaminoherbimycin A, an analog of herbimycin A that is stable against treatment with thiol compounds or granulocyte-macrophage colony-stimulating factor in human leukemia cells

OBJECTIVE: To investigate the effects on lipid and lipoprotein metabolism of two doses (5- or 10 micrograms/24 h) of levonorgestrel released from an intrauterine device (IUD) in combination with orally administered estradiol (2 mg estradiol valerate) in perimenopausal women. DESIGN: A 1-year prospective randomized single blind clinical trial. SETTING: Department of Obstetrics and Gynaecology, Ostra Hospital, G?teborg, Sweden. SUBJECTS: Fifty-one perimenopausal women with climacteric symptoms. OUTCOME MEASURES: Cholesterol in serum and in lipoprotein fractions; high-density lipoprotein (HDL), low-density lipoprotein (LDL). Triglycerides in serum and in very low-density lipoprotein. RESULTS: In both treatment groups significant elevations in HDL-cholesterol of similar magnitude were observed after 1 month and these changes were maintained during the 12 month observation period. In both treatment groups an initial significant decrease of LDL-cholesterol was observed and the decrement was maintained after 12 months. Serum levels of cholesterol decreased significantly in both groups after 1 month and were maintained after 12 months in the levonorgestrel-IUD (LNG-IUD) 5 micrograms group. However, the initial reduction of serum cholesterol in the LNG-IUD 10 micrograms group did not differ from baseline after 12 months. Serum triglyceride levels fluctuated during the observation period. No significant changes occurred. CONCLUSION: Continuous combined HRT with intrauterine administration of levonorgestrel, 5- or 10 micrograms/24 h, in perimenopausal women was observed to increase HDL-cholesterol and to decrease LDL-cholesterol compared with pretreatment values. The low doses of levonorgestrel did not reverse the beneficial effects on lipid metabolism usually seen after estradiol administration.     

Precipitation-hardenable Mg–2.4Zn–0.1Ag–0.1Ca–0.16Zr (at.%) wrought magnesium alloy

A new precipitation-hardenable wrought magnesium alloy based on the Mg–Zn system with an excellent combination of high tensile yield strength, good ductility and low tensile-compression anisotropy has been developed. The Mg–2.4Zn–0.1Ag–0.1Ca(–0.16Zr) (at.%) alloys show significantly higher age-hardening responses compared to that of the binary Mg–2.4Zn alloy due to the increased number density and refinement of rod-like MgZn₂ precipitates. The addition of Zr to the Mg–2.4Zn–0.1Ag–0.1Ca alloy resulted in a significant refinement of the grain size. A high number density of precipitates was observed in the Mg–2.4Zn–0.1Ag–0.1Ca–0.16Zr alloy in both the as-extruded condition and following isothermal ageing at 160 °C. The tensile yield strength of the as-extruded and aged alloys was 289 and 325 MPa, with an elongation of 17% and 14%, respectively. These alloys show relatively low compression and tensile anisotropy. The origins of these unique mechanical properties are discussed based on the detailed microstructural investigation.