Effect of cognitive load on speech prosody in aviation: Evidence from military simulator flights

Mental overload directly affects safety in aviation and needs to be alleviated. Speech recordings are obtained non-invasively and as such are feasible for monitoring cognitive load. We recorded speech of 13 military pilots while they were performing a simulator task. Three types of cognitive load (load on situation awareness, information processing and decision making) were rated by a flight instructor separately for each flight phase and participant. As a function of increased cognitive load, the mean utterance-level fundamental frequency (F0) increased, on average, by 7 Hz and the mean vocal intensity increased by 1 dB. In the most intensive simulator flight phases, mean F0 increased by 12 Hz and mean intensity, by 1.5 dB. At the same time, the mean F0 range decreased by 5 Hz, on average. Our results showed that prosodic features of speech can be used to monitor speaker state and support pilot training in a simulator environment.     

Solutions to electromagnetic interference problems between cochlear implants and GSM phones.

For persons using cochlear implants, electromagnetic compatibility (EMC) problems may sometimes be an obstacle to using digital cellular telephones. This study aimed at exploring the benefit of three new assistive listening device prototypes that eliminate or diminish EMC problems. Ten experienced cochlear implant users listened in quiet to running speech samples and a sentence test on a landline phone, a digital cellular phone with and without three prototypes. The subjects' performance was assessed using a sentence test, a subjective visual analog scale, and by ranking the best and the poorest listening condition. Compared to the other test conditions, listening to a digital cellular phone alone revealed, on average, the poorest sentence recognition scores (29%) and the poorest results in four different subjective judgments (the amount of disturbances, the clarity of the message, the quality of the sound, overall judgment) with all three implant systems tested. The prototypes generally helped the implantees to recognize speech better on the cellular telephone (by 10-21 percent units, on average). Use of assistive listening devices and further development of EMC of both cochlear implant systems and digital cellular phones needs to take place to enable smooth use of digital cellular phones for all implantees.     

High Temperature‐Stable Perovskite Solar Cell Based on Low‐Cost Carbon Nanotube Hole Contact

Mixed ion perovskite solar cells (PSC) are manufactured with a metal‐free hole contact based on press‐transferred single‐walled carbon nanotube (SWCNT) film infiltrated with 2,2,7,‐7‐tetrakis(N,N‐di‐p‐methoxyphenylamine)‐9,90‐spirobifluorene (Spiro‐OMeTAD). By means of maximum power point tracking, their stabilities are compared with those of standard PSCs employing spin‐coated Spiro‐OMeTAD and a thermally evaporated Au back contact, under full 1 sun illumination, at 60 °C, and in a N₂ atmosphere. During the 140 h experiment, the solar cells with the Au electrode experience a dramatic, irreversible efficiency loss, rendering them effectively nonoperational, whereas the SWCNT‐contacted devices show only a small linear efficiency loss with an extrapolated lifetime of 580 h.     

Review of materials and manufacturing options for large area flexible dye solar cells

This review covers the current state of the art related to up-scaling and commercialization of dye solar cells (DSC). The cost analysis of the different components and manufacturing of DSC gives an estimate on the overall production costs. Moreover, it provides an insight in which areas improvement is needed in order to reach significant cost reductions. As a result of the cost analysis, transferring the technology to flexible substrates and employment of simple roll-to-roll production methods were found the key issues. The focus of this work was set accordingly. In this work, appropriate materials along with their unique fabrication processes and different design methods are investigated highlighting their advantages and limitations. The basic goal is to identify the best materials and preparation techniques suitable for an ideal roll-to-roll process of flexible dye solar module fabrication as well as the areas where further development is still needed.     

Comparison of dye solar cell counter electrodes based on different carbon nanostructures

Three characteristically different carbon nanomaterials were compared and analyzed as platinum-free counter electrodes for dye solar cells: 1) single-walled carbon nanotube (SWCNT) random network films on glass, 2) aligned multi-walled carbon nanotube (MWCNT) forest films on Inconel steel and quartz, and 3) pressed carbon nanoparticle composite films on indium tin oxide-polyethylene terephtalate plastic. Results from electrochemical impedance spectroscopy and electron microscopy were discussed in terms of the catalytic activity, conductivity, thickness, transparency and flexibility of the electrode films. The SWCNT films showed reasonable catalytic performance at similar series resistance compared to platinized fluorine doped tin oxide-coated glass. The MWCNTs had similar catalytic activity, but the electrochemical performance of the films was limited by their high porosity. Carbon nanoparticle films had the lowest charge transfer resistance resulting from a combination of high catalytic activity and dense packing of the material.     

Synergism of enzymes in chemical pulp bleaching from an industrial point of view: A critical review

Enzymes are biological catalysts and are very specific, catalyzing either a single chemical reaction or a limited number of closely related reactions. For example, xylanases are enzymes that catalyze the cleavage of polymeric xylan and thereby break down this hemicellulose. The first xylanase enzyme preparations used in the bleaching process of chemical pulp also contained cellulase, which catalyzes the hydrolysis of cellulose. This obviously had an adverse effect on pulp yield and quality. Unfortunately, this setback gave enzyme-assisted pulp bleaching a negative reputation. At a later stage, enzyme producers managed to engineer enzyme production strains that generated cellulase-free xylanase preparations. However, due to the initial negative experiences with the earlier enzyme mixtures, only a limited number of companies in the pulp industry have seriously considered using these so-called second-generation enzymes in their bleach plants. It is apparent that these improved enzyme preparations would bring about significant benefits in terms of chemical cost savings and effluent quality. In addition to xylanase-aided bleaching, it is possible to improve the effectivity further by adding other enzymes, such as lipase and esterase, to create an enzyme cocktail. This may be particularly beneficial in the bleaching of hardwood pulp, such as white birch, which often encounters complex and troublesome problems with wood extractives. By adding different types of enzymes at more than one position in the fiberline, even further improvements are possible. The main objective of this review is to discuss the advantages of incorporating modern enzyme preparations in the bleaching of chemical pulp.     

Screening of chemical pulp,revisiting technology options,and the state-of-the-art equipment—A critical review

Screening of pulp can be expressed as a process where solid contaminants are removed from a pulp slurry without an excessive loss of fibres of acceptable quality. The impurities originate from the feedstock, or they are generated during the transport, handling, storage, or pulping process. The most typical impurities include bark, fibre bundles or shives, knots, plastic, rubber, and sand. Moreover, there are also other objectives for screening, such as the improvement of the pulp quality, savings in bleaching chemical consumption, and protection of process equipment. In industrial applications, pulp screening is typically carried out with more than one screen for a more beneficial screening result. The pulp screening equipment can be divided into different types by the separation technique employed, such as atmospheric or pressurized screens, centrifugal screens, vibrating screens, etc. In addition, there are other types of related equipment that are common in the pulp screening process, such as knotters, refiners, and hydrocyclones. The main objective of this review is to discuss the advantages and disadvantages of modern screening equipment as well as introduce contemporary screening strategies for chemical pulp mills.