Influence of HMTA ligand in MMA AGET ATRP emulsion polymerization

Interactions of hexamethylenetetramine ligand in atom transfer radical polymerization initiated by activator generated by electron transfer were studied. Polymerization of methyl methacrylate was done using two-step experimental procedure in 2 L emulsion batch reactor at 50, 60, and 80°C. The selection of reactant ratios was quite challenging for a reactor of this size. Replicate runs were conducted for data reproducibility purpose. Gravimetry method and gel permeation chromatography were used to determine monomer conversion, Mn, and PDI of polymer samples. PMMA produced was also characterized by means of dynamic light scattering, Fourier-transform infrared spectroscopy and nuclear Magnetic Resonance spectroscopy. Results showed high monomer conversion up to 93% and Mn ranging 243–274 kg/mol with PDI from 1.45 to 1.60. Besides, combining HMTA with sodium dodecyl sulfate, an anionic surfactant, a well-controlled polymer with a lower Mn of 201 kg/mol and PDI of 1.56 was obtained in 3 hr reaction time.     

HYDCOND: A Computer Program to Calculate Hydraulic Conductivity from Grain Size Data in Saudi Arabia

Hydrogeologists always look for reliable techniques to determine the hydraulic conductivity of the aquifers with which they are concerned, for better groundwater management and conservation. The use of grain size distribution for unconsolidated aquifer materials is considered feasible and sound. Several empirical equations to calculate hydraulic conductivity using grain size distribution are well established in the literature. The present paper describes a computer program, HYDCOND, which is designed to calculate hydraulic conductivity using grain size data. In addition, the program calculates grain size statistics and classifies the aquifer materials in terms of their main size percentage. HYDCOND is menu-driven, interactive and user friendly program. It was tested extensively and successfully using materials from Minjur aquifer in central Saudi Arabia. The results were found to be reliable and comparable to those obtained using other, costly techniques. HYDCOND can be implemented successfully to calculate hydraulic conductivity in all types of aquifers in Saudi Arabia and other regions of the world.     

An Eco-Friendly Approach to the Control of Pathogenic Microbes and Anopheles stephensi Malarial Vector Using Magnesium Oxide Nanoparticles (Mg-NPs) Fabricated by Penicillium chrysogenum

The discovery of eco-friendly, rapid, and cost-effective compounds to control diseases caused by microbes and insects are the main challenges. Herein, the magnesium oxide nanoparticles (MgO-NPs) are successfully fabricated by harnessing the metabolites secreted by Penicillium chrysogenum. The fabricated MgO-NPs were characterized using UV-Vis, XRD, TEM, DLS, EDX, FT-IR, and XPS analyses. Data showed the successful formation of crystallographic, spherical, well-dispersed MgO-NPs with sizes of 7–40 nm at a maximum wavelength of 250 nm. The EDX analysis confirms the presence of Mg and O ions as the main components with weight percentages of 13.62% and 7.76%, respectively. The activity of MgO-NPs as an antimicrobial agent was investigated against pathogens Staphylococcus aureus, Bacillus subtilis, Pseudomonas aeruginosa, Escherichia coli, and Candida albicans, and exhibited zone of inhibitions of 12.0 ± 0.0, 12.7 ± 0.9, 23.3 ± 0.8, 17.7 ± 1.6, and 14.7 ± 0.6 mm respectively, at 200 µg mL⁻¹. The activity is decreased by decreasing the MgO-NPs concentration. The biogenic MgO-NPs exhibit high efficacy against different larvae instar and pupa of Anopheles stephensi, with LC50 values of 12.5–15.5 ppm for I–IV larvae instar and 16.5 ppm for the pupa. Additionally, 5 mg/cm² of MgO-NPs showed the highest protection percentages against adults of Anopheles stephensi, with values of 100% for 150 min and 67.6% ± 1.4% for 210 min.     

Thermal and flammability properties of a silica–poly(methylmethacrylate) nanocomposite

PMMA, poly(metheylmethacrylate), nanocomposites were made by in situ radical polymerization of MMA, methylmethacrylate, with colloidal silica (ca. 12 nm) to study the effects of nanoscale silica particles on the physical properties and flammability properties of PMMA. Transparent samples resulted and the dispersity of the particles was examined by transmission electron microscopy and atomic force microscopy. The addition of nanosilica particles (13% by mass) did not significantly change the thermal stability, but it made a small improvement in modulus, and it reduced the peak heat release rate roughly 50%. Last, the flame‐retardant mechanism provided by the addition of nanosilica particles in PMMA is discussed. Published 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2072–2078, 2003     

Evaluation of rutting potential for asphalt concrete mixes containing copper slag

Copper slag (CS) is a by-product of the copper extraction process, which can be used as coarse and/or fine aggregate in hot mix asphalt (HMA) pavements. This study used CS as a replacement of the fine aggregate with a percentage of up to 40% by total aggregate weight. The objective of this study was to evaluate the effect of CS on the rutting potential of the asphalt concrete mix using two methods. One method is based on the Dynamic modulus |E*| testing result. Actual pavement temperature data from a test section were used with the developed |E*| master curves. EverStressFE finite element program was used to perform a linear elastic load-deformation analysis for a pavement section and to determine the vertical resilient strain in a 40-mm HMA surface layer. The M-E PDG permanent deformation model was used with and Excel Visual Basic for Applications code to predict the accumulated rutting for different CS mixes for 10 million ESALs. The other method used the data from the flow number (FN) test. Based on the |E*| approach, the results indicated that adding 5% CS in the mix increased the predicted rutting from 0.59 to 0.98 mm at 10 million ESALs (increase by 68%). When 40% CS was used, rutting increased by more than 700% compared with the control mix. After analysing the FN results with the Francken model, the results indicated a decrease in FN as CS content is increased, indicating higher rutting potential. The decrease in FN ranged from 9% for 5% CS to 95% for 40% CS. The mixes containing up to 10% CS satisfied the minimum FN criteria for rutting. A calibration process for the M-E PDG distress prediction models that allows the use of waste and by-product materials such as CS should be considered in the future.     

A 3-D visualization method for image-guided brain surgery

This paper deals with a 3D methodology for brain tumor image-guided surgery. The methodology is based on development of a visualization process that mimics the human surgeon behavior and decision-making. In particular, it originally constructs a 3D representation of a tumor by using the segmented version of the 2D MRI images. Then it develops an optimal path for the tumor extraction based on minimizing the surgical effort and penetration area. A cost function, incorporated in this process, minimizes the damage surrounding healthy tissues taking into consideration the constraints of a new snake-like surgical tool proposed here. The tumor extraction method presented in this paper is compared with the ordinary method used on brain surgery, which is based on a straight-line based surgical tool. Illustrative examples based on real simulations present the advantages of the 3D methodology proposed here.     

Ion Beam Analysis and Normal-State Conduction Mechanisms for (Bi, Pb)-2223 and (Tl, Pb)/Sr-1212 Superconducting Phases Substituted by Ruthenium

Superconducting samples of type Bi_1.8Pb_0.4Sr₂Ca_2.1Cu_3−x Ru _x O_10+δ , (Bi, Pb)-2223, with 0.0≤x≤0.4 and type Tl_0.5Pb_0.5Sr_1.6Ba_0.4CaCu_2−x Ru _x O_7−δ , (Tl, Pb)/Sr-1212, with 0.0≤x≤0.525 were synthesized using the standard solid-state reaction technique. The lattice parameters and the surface morphology for these samples were determined using X-ray powder diffraction (XRD) and scanning electron microscope (SEM) measurements, respectively. All element-contents of the samples prepared were estimated from the electron dispersive X-ray (EDX) technique, and their results were compared with those obtained from particle-induced X-ray emission (PIXE). In addition, the oxygen-content was determined using elastic Rutherford backscattering spectroscopy (RBS) technique at 3 MeV proton beam. The superconducting transition temperature T _c and the hole carrier concentration P were determined from the electrical resistivity measurement. The data of both T _c and P for Bi_1.8Pb_0.4Sr₂Ca_2.1Cu_3−x Ru _x O_10+δ and Tl_0.5Pb_0.5Sr_1.6Ba_0.4CaCu_2−x Ru _x O_7−δ phases increased up to x=0.05 and 0.075, respectively and then they decreased as x increased. The superconductivity was completely destroyed around x=0.4 and 0.525 for (Bi, Pb)-2223 and (Tl, Pb)/Sr-1212 phases, respectively. The normal-state electrical resistivity data were analyzed using the two and three dimensional variable range hopping (2D-VRH and 3D-VRH) and the Coulomb gab (CG).     

Modification of the electric properties of molecular devices via gradual increase of number of nitrogen atoms: A computational study

This paper introduces a new means to manipulate electronic structures and, consequently, the electrical properties of molecular devices via gradual increase of number of nitrogen atoms in the backbone of conjugated organic molecular systems. Diblock molecules were selected for this purpose. Density functional theory (DFT) was used to investigate geometrical and electronic structures in the absence and presence of external electric field. Furthermore, the tendency of the anchor sulfur atoms toward electrodes in a simulated closed circuit was estimated from the relative condensed Fukui function. The obtained results indicated that HOMO–LUMO gap decreases steadily with increasing the number of nitrogen atoms, which would be used as a means for modifying the electrical properties in a regular mode.