Visible transmission spectroscopy for the assessment of egg freshness

The objective of this research was to investigate the feasibility of visible transmission spectroscopy for the non‐destructive assessment of the freshness of an individual egg. A total of 600 intact white‐shelled eggs of the same flock (Lohmann, 40 weeks of age) were measured. To obtain a considerable variation in freshness, groups consisting of 60 eggs were stored (18 °C, 55% RH) for 0, 2, 4, 6, 8, 10, 12, 14, 16 and 18 days. The non‐destructive spectral measurements were compared with the two most widely used destructive freshness parameters, namely Haugh units and albumen pH. A partial least squares (PLS1) model was built in order to predict Haugh units and pH of the albumen based on the transmission spectra. The correlation coefficients between the predicted value and the measured value were 0.842 and 0.867 for Haugh unit and pH of the albumen, respectively. These results show that the light transmission spectrum of an egg provides quantitative information about egg freshness. Relevant information concerning egg freshness is restricted to the interval between 570 and 750 nm. Furthermore, the models obtained for both destructive parameters were strikingly similar, indicating that Haugh unit and pH have the same physico‐chemical background. Copyright © 2006 Society of Chemical Industry     

Analysis of diffraction gratings by using an edge element method

Typically the grating problem is formulated for TE and TM polarizations by using, respectively, the electric and magnetic fields aligned with the grating wall and perpendicular to the plane of incidence, and this leads to a one-field-component problem. For some grating profiles such as metallic gratings with a triangular profile, the prediction of TM polarization by using a standard finite-element method experiences a slower convergence rate, and this reduces the accuracy of the computed results and also introduces a numerical polarization effect. This discrepancy cannot be seen as a simple numerical issue, since it has been observed for different types of numerical methods based on the classical formulation. Hence an alternative formulation is proposed, where the grating problem is modeled by taking the electric field as unknown for TM polarization. The application of this idea to both TE and TM polarizations leads to a two-field-component problem. The purpose of the paper is to propose an edge finite-element method to solve this wave problem. A comparison of the results of the proposed formulation and the classical formulation shows improvement and robustness in the new approach.     

Sounds Stimulation on In Vitro HL1 Cells: A Pilot Study and a Theoretical Physical Model

Mechanical vibrations seem to affect the behaviour of different cell types and the functions of different organs. Pressure waves, including acoustic waves (sounds), could affect cytoskeletal molecules via coherent changes in their spatial organization and mechano-transduction signalling. We analyzed the sounds spectra and their fractal features. Cardiac muscle HL1 cells were exposed to different sounds, were stained for cytoskeletal markers (phalloidin, beta-actin, alpha-tubulin, alpha-actinin-1), and studied with multifractal analysis (using FracLac for ImageJ). A single cell was live-imaged and its dynamic contractility changes in response to each different sound were analysed (using Musclemotion for ImageJ). Different sound stimuli seem to influence the contractility and the spatial organization of HL1 cells, resulting in a different localization and fluorescence emission of cytoskeletal proteins. Since the cellular behaviour seems to correlate with the fractal structure of the sound used, we speculate that it can influence the cells by virtue of the different sound waves’ geometric properties that we have photographed and filmed. A theoretical physical model is proposed to explain our results, based on the coherent molecular dynamics. We stress the role of the systemic view in the understanding of the biological activity.     

Cell-membrane damage and element leaching in transplanted Parmelia sulcata lichen related to ambient SO2, temperature, and precipitation

Measurements were performed in lichen (Parmelia sulcata) transplants, to gain insight into the lichen vitality as possibly affected by both element deposition or lichen element content and further ambient atmospheric conditions (temperature, precipitation, SO2 levels). The electrical conductivity of rinsing solutions was used to assess cell-membrane damage in Parmelia sulcata in an experiment, which ran from August 2001 until August 2002. Element contents of the solutions and lichens were determined by inductively coupled plasma-optical emission spectrometry and by k0-instrumental neutron activation analysis, respectively. Factor analysis (MCATTFA) was used to determine grouping of elements of similar origin and/ or behavior. All in all, the data indicate that, apartfrom lichen Na and Cl levels, and for temperature and precipitation, no clear relationships with conductivity could be observed. Conductivity was mostly related to released Na, Cl, K, Mg, and Cs. On the basis of concentrations, Na, Cl, and K could be considered as largely determining the conductivity. The data suggest a different origin for K than that for Na and Cl: the latter two are most probably due to effects from sea salt sprays. Parmelia sulcata was sensitive enough to reflect appreciable ambient rises in air SO2 and resistant enough to recover afterward. MCATTFA on selected elements (K, Sc, Cu, V, As, and Sb) indicated the absence of any comparability between K and V, As and Sb, suggesting differences in origin and/or chemico-physical occurrence. Generally speaking, the present data suggest that the comparability of lichen vitality in large geographical areas may be limited and governed by the area's variability in temperature and precipitation rather than by variability in metal deposition rates. The leaching data on all elements and element groups, however, strongly suggest that wet deposition may also severely affect lichen elemental levels. This latter observation means that comparing outcomes for time or spatial series of lichen samples should be accompanied by a comparably careful monitoring of (preceding) ambient conditions.     

Osteoblast cell membrane hybrid bilayers for studying cell-cell interactions

Osteoblast-like cells were grown on a surface that presents cell membrane components to the cells in culture. The culture surface was a bimolecular layer formed by the interaction of osteoblast plasma membrane vesicles with an alkanethiol monolayer. The potential of these osteoblast-membrane hybrid bilayers for promoting osteoblast adhesion, growth and differentiation was examined. UMR-106 osteoblast-like cells cultured on these surfaces are normal in appearance, and in the presence of serum, proliferate as well or better than on control surfaces. The level of alkaline phosphatase production in the presence and absence of serum suggests that the osteoblast-like cells retain their differentiated phenotype, and appear to respond to the cell surface ligands presented by the osteoblast-membrane biomimetic surface. These observations suggest that biomimetic membrane films prepared from osteoblast cell membranes support osteoblast cell growth, allow the cells to maintain their differentiation state and may be suitable as a model system to probe cell-cell interactions.     

Study on How to Adapt Raw Clay Housing to Climate Change： Locust Bean Tree （Parkia Biglobosa） Used as Protecting Material

The use of raw clay in housing construction dates back from ancient times and is still living on. Traditional habitat comprising various buildings all over different places of our planet, give evidence. Among any other pathologies affecting naked earthen walls, the rain water wash remains a major concern and deserves careful consideration. Which justifies the interest of this research focused on the protection means of such types of walls. This article relates the experiment conducted on low walls made out of raw clay mixed with composite protecting products （traditional and modern ones as well）, being tested to intensive water floods. The result of the tests assessed through efficiency of the protecting materials, shows that the locust bean tree （local tree） fruit husk extract added to raw clay mortar and carefully blended seems to provide better ability to protect walls against water assault. Moreover, consistency check and plasticity reveal better performance in clay material properties.     

Response of hypertension to conventional antihypertensive treatment and/or steroidogenesis inhibitors in Cushing's syndrome

OBJECTIVES: To evaluate the effect of conventional antihypertensive drugs and/or inhibitors of steroid production in the management of hypertension in Cushing's syndrome. DESIGN: A retrospective open clinical study with pre- and post-treatment assessment. SETTING: A university hospital, where patients were initially admitted and then followed-up in an ambulatory clinic over a period of 6 years. SUBJECTS: Forty consecutive hypertensive patients with Cushing's syndrome. INTERVENTIONS: Patients were divided into two groups according to the different management of hypertension. The first group (group 1) of 28 patients included those treated with antihypertensive drugs at full dose (diuretics, calcium antagonists, angiotensin converting enzyme [ACE] inhibitors, as single agents or in combination). The second group (group 2) of 12 patients received ketoconazole alone. MAIN OUTCOME MEASURES: Blood pressure variations compared to pre-treatment levels. RESULTS: Blood pressure normalization was obtained in four of the 28 patients of group 1. In 12 of the remaining patients, ketoconazole, an inhibitor of steroid production, was subsequently added and this normalized blood pressure in all but the one in whom cortisol was not decreased. In the 12 patients of group 2, ketoconazole alone lowered blood pressure within normal limits in all but one who had long-standing hypertension. CONCLUSIONS: In hypertensive patients with Cushing's syndrome, conventional antihypertensive therapy is mostly ineffective. Blood pressure response is satisfactory only after the restoration of normal cortisol levels, indicating the need for a specific treatment for hypertension in this disorder.     

Design of nonlinear photonic crystal fibers with ultra‐flattened zero dispersion for supercontinuum generation

The study reports on the design and performance of two air‐filled and two partial ethanol‐filled photonic crystal fiber (PCF) structures with a tetra core for supercontinuum generation. The PCFs are nonlinear with ultra‐flattened zero dispersion. Holes with smaller areas are used to create a tetra‐core PCF structure. Ethanol is filled in the holes of smaller area while the larger holes of cladding region are air‐filled. Optical properties including dispersion, effective mode area, confinement loss, normalized frequency, and nonlinear coefficient of the designed PCF structures are investigated via full vector finite difference time domain (FDTD) method. A PCF structure with lead silicate as wafer exhibits significantly better results than a PCF structure with silica as wafer. However, both structures report dispersion at a telecommunication wavelength corresponding to 1.55 μm. Furthermore, the PCF structure with lead silicate as wafer exhibits a very high nonlinear coefficient corresponding to 1375 W^?1 km^?1 at the same wavelength. This scheme can be used for optical communication systems and in optical devices by exploiting the principle of nonlinearity.     

Semantic-based Merging of RSS Items

Merging XML documents can be of key importance in several applications. For instance, merging the RSS news from same or different sources and providers can be beneficial for end-users in various scenarios. In this paper, we address this issue and explore the relatedness measure between RSS elements. We show here how to define and compute exclusive relations between any two elements and provide several predefined merging operators that can be extended and adapted to human needs. We also provide a set of experiments conducted to validate our approach.     

Modal formulation for diffraction by absorbing photonic crystal slabs

A finite element-based modal formulation of diffraction of a plane wave by an absorbing photonic crystal slab of arbitrary geometry is developed for photovoltaic applications. The semianalytic approach allows efficient and accurate calculation of the absorption of an array with a complex unit cell. This approach gives direct physical insight into the absorption mechanism in such structures, which can be used to enhance the absorption. The verification and validation of this approach is applied to a silicon nanowire array, and the efficiency and accuracy of the method is demonstrated. The method is ideally suited to studying the manner in which spectral properties (e.g., absorption) vary with the thickness of the array, and we demonstrate this with efficient calculations that can identify an optimal geometry.