Role of Epithelial–Mesenchymal Plasticity in Pseudomyxoma Peritonei: Implications for Locoregional Treatments

The mechanisms by which neoplastic cells disseminate from the primary tumor to metastatic sites, so-called metastatic organotropism, remain poorly understood. Epithelial–mesenchymal transition (EMT) plays a role in cancer development and progression by converting static epithelial cells into the migratory and microenvironment-interacting mesenchymal cells, and by the modulation of chemoresistance and stemness of tumor cells. Several findings highlight that pathways involved in EMT and its reverse process (mesenchymal–epithelial transition, MET), now collectively called epithelial–mesenchymal plasticity (EMP), play a role in peritoneal metastases. So far, the relevance of factors linked to EMP in a unique peritoneal malignancy such as pseudomyxoma peritonei (PMP) has not been fully elucidated. In this review, we focus on the role of epithelial–mesenchymal dynamics in the metastatic process involving mucinous neoplastic dissemination in the peritoneum. In particular, we discuss the role of expression profiles and phenotypic transitions found in PMP in light of the recent concept of EMP. A better understanding of EMP-associated mechanisms driving peritoneal metastasis will help to provide a more targeted approach for PMP patients selected for locoregional interventions involving cytoreductive surgery and hyperthermic intraperitoneal chemotherapy.     

A comparison between the axial flux and the radial flux structures for PM synchronous motors

The aim of this paper is the comparison of the axial flux (AF) structures versus the conventional radial flux (RF) structures for permanent-magnet synchronous motors. The comparison procedure is based on simple thermal considerations. Two motor typologies are chosen and compared in terms of delivered electromagnetic torque. The comparison is developed for different motor dimensions and the pole number influence is put into evidence. The paper reports the complete comparison procedure and the related results analysis. The obtained results show that, when the axial length is very short and the pole number is high, the AF motors can be an attractive alternative to the conventional RF solutions.     

No tooling cost process for induction motors energy efficiency improvements

In this paper, the analysis of some possibilities for increasing the induction motor efficiency using production technological process modifications is reported. This approach is known as the "no tooling cost" (NTC) strategy because it does not require a complete redesign of new laminations with a consistent cost in terms of investments. The paper shows the results obtained by a full experimental approach, using "ad hoc" prototypes. The NTC design modification and the technological processes analyzed in this paper have been done on totally enclosed fan-cooled standard induction motors. Obviously, the original motors have been compared from the energetic point of view with these prototypes. The energetic performance has been measured in accordance with the IEEE Std. 112-96 Method B. In particular, the following modifications, for obtaining an increase in efficiency, have been taken into consideration: rotor with copper bar included in the slot before the aluminum die cast, increase of the core axial length, and annealing of the stator core.     

Evaluation of the uncertainty of an optical machine with a vision system for contact-less three-dimensional measurement

Optical machines with a vision system containing a video camera are designed to perform contact-less three-dimensional measurements. They are becoming more widely used in the industrial sector because of the many possibilities for automation they permit and because of the speed and economies in measurement tasks that can consequently be obtained. Within dimensional control these machines introduce significant characteristics of flexibility, savings and reliability. Therefore the purpose is to identify the principal metrological characteristics of such machines and so characterise the metrological traceability of the measurements obtained from them. The aim is to qualify each part of the optical machine as well as on the whole. Previously, no metrological traceability of this equipment has been provided in primary metrology, either at national (SIT—Sistema di Taratura in Italia—Calibration System in Italy) or at international level (EA–European co-operation for Accreditation). For this reason we develop a mathematical model that permits the evaluation of the measurement uncertainties in the use of such a device. The purpose is to obtain the certification of the measurement results furnished by the optical machine in as broad a context as possible. The experimental results of the tests are introduced for validating the proposed method. This paper provides the basis of the expression of the uncertainty of a measurement result obtained using the optical measurement machines and it shows the necessary requirements for the numerical evaluation of such uncertainty.     

Synthesis and characterization of nanocomposites of thermoplastic polyurethane with both graphene and graphene nanoribbon fillers

Thermoplastic polyurethane (TPU) nanocomposites containing graphene and graphene nanoribbons were obtained by polymerizing 1,4-butanediol with two diisocyanates (namely, 1,6-hexane diisocyanate or isophorone diisocyanate), in which the nanofillers were previously dispersed. Raman spectroscopy and Transmission Electron Microscopy demonstrated the formation of few-layer graphene and graphene nanoribbons dispersed in the monomers. At variance to the methods commonly reported in literature, that used in this work consists of the direct exfoliation of graphite without any chemical manipulation. Apart from the obvious cost and ease advantages, the so-obtained graphene does not contain any carboxy or alkoxy groups formed during the exfoliation process, which, at variance, are typically present in the most commonly reported methods. This finding paves the way toward the large-scale production of graphene and its nanoribbons, which are considered even more interesting than graphene itself for many potential applications. The obtained nanocomposites show a peculiar thermal and rheological behavior due to the presence of the nanofillers and to their reinforcing or plasticizing effect exerted on the TPU matrices.     

Whey fractionation through the membrane separation process

The aim of this work is to improve the utilisation of fractions of whey through membrane separation processes. From a solution of whey treated by ultrafiltration (UF) associated with diafiltration (DF), two streams were obtained: a concentrate and a permeate. In this process, a purified protein concentrate with about 70% of protein was obtained. Permeate was treated by electrodialysis (ED) to obtain a fraction rich in lactose (90%). The final effluent was treated by reverse osmosis (RO) in order to recover water free of salts. RO made it possible to recover 50% water and retain 85% of the salts.     

Cathodic protection monitoring of buried carbon steel pipeline: measurement and interpretation of instant-off potential

The criterion used to verify the cathodic protection condition of a structure is based on structure-to-electrolyte potential measurement, which can include an ohmic drop contribution. Among the available techniques, the use of potential probes with internal reference electrode and of corrosion coupons with a so-called soil-access tube represents the most appropriate way to measure the IR-free potential, eliminating the ohmic drop contribution. An alternative is represented by on-off technique if equalising, galvanic or stray currents are not present. Laboratory tests have been carried out in soil-simulating solution on cathodically protected carbon steel in order to evaluate the effectiveness of off-potential for the assessment of cathodic protection. Instant-off potential is not reliable in overprotection condition; moreover, the accuracy of the measurement is strongly influenced by the presence of external current as galvanic or equalising currents. The effect of low-pass filter in the data acquisition system on the potential reading is discussed.     

Effect of cumulus morphology and maturation stage on the cryopreservability of equine oocytes

Oocyte cryopreservation is a potentially valuable way of preserving the female germ line. However, the developmental competence of cryopreserved oocytes is presently poor. This study investigated whether the morphology of the cumulus complex surrounding an immature equine oocyte and/or the oocyte's stage of maturation affect its cryopreservability. Compact (Cp) and expanded (Ex) cumulus oocyte complexes (COCs) were vitrified either shortly after recovery (germinal vesicle stage, GV) or after maturation in vitro (IVM); cryoprotectant-treated and -untreated non-frozen oocytes served as controls. In Experiment I, oocytes matured in vitro and then vitrified, or vice versa, were examined for maturation stage and meiotic spindle quality. Cp and Ex COCs vitrified at the GV stage matured at similar rates during subsequent IVM (41 vs 46% MII), but meiotic spindle quality was better for Cp than Ex (63 vs 33% normal spindles). Vitrifying oocytes after IVM resulted in disappointing post-warming spindle quality (32 vs 28% normal for Cp vs Ex). In Experiment II, oocytes from Cp and Ex COCs vitrified at the GV or MII stages were fertilized by intracytoplasmic sperm injection (ICSI) and monitored for cleavage and blastocyst formation. Oocytes vitrified prior to IVM yielded higher cleavage rates (34 and 27% for Cp and Ex COCs) than those vitrified after IVM (16 and 4%). However, only one blastocyst was produced from a sperm-injected vitrified-warmed oocyte (0.4 vs 9.3% and 13% blastocysts for cryoprotectant-exposed and -untreated controls). It is concluded that, when vitrification is the chosen method of cryopreservation, Cp equine COCs at the GV stage offer the best chance of an MII oocyte with a normal spindle and the potential for fertilization; however, developmental competence is still reduced dramatically.