Synthesis and physicochemical characterization of a well-defined poly(butadiene 1,3)-block-poly(dimethylsiloxane) copolymer

For the first time, order-order and order-disorder transitions were detected and characterized in a model diblock copolymer of poly(butadiene-1,3) and poly(dimethylsiloxane) (PB-b-PDMS). This model PB-b-PDMS copolymer was synthesized by the sequential anionic polymerization (high vacuum techniques) of butadiene 1,3 (B) and hexamethylciclotrisiloxane (D₃), and subsequently characterized by nuclear magnetic resonance (¹H and ¹³C NMR), size exclusion chromatography (SEC), Fourier Transform infrared spectroscopy (FTIR), Small-Angle X-ray scattering (SAXS) and rheology. SAXS combined with rheological experiments shows that the order-order and order-disorder transitions are thermoreversible. This fact indicates that the copolymer has sufficient mobility at the timescale and at the temperatures of interest to reach their equilibrium morphologies.     

Towards efficient partial evaluation in logic programming

Partial evaluation is a symbolic manipulation technique used to produce efficient algorithms when part of the input to the algorithm is known. Other applications of partial evaluators such as universal compilation and compiler generation are also known to be possible. A partial evaluator receives as input a program and partially known input to that program, and outputs a residual program which should run at least as efficient as the input program with restricted input. In this paper we study the case where both the input and residual programs are logic programs, being the partial evaluator itself a logic program. Up to now, partial evaluators have failed to process large “non=toy” examples. Here we present extensions to partial evaluators whic will allow us to produce more efficient residual programs using less computing resources, during partial evaluation. First, the introduced extensions allow the processing of large examples, which is not possible with the previous techniques. This is now possible since the extensions use less CPU time and memory consumption during the partial evaluation process. Second, the extended partial evaluator produces smaller residual programs, producing important CPU time optimizing effects. With the standard techniques, a partial evaluator will most probably act as a pessimizer, not as an optimizer. Examples are given.     

Industrial Plant for Olive Mill Wastewater from Two-Phase Treatment by Chemical Oxidation

Olive-oil production generates high and variable amounts of wastewaters from the olives and olive-oil washing (OMW), resulting to great environmental impact. These waters are normally stored in large holding ponds for evaporation during the summer. The present study examines the chemical-oxidation process using ferric chloride catalyst for the activation of H2O2 (Fenton reaction). Tests have been made on an industrial scale. The final average value of chemical oxygen demand (COD) was close to 371?mg?O2?L?1 (%CODremoval = 86%, CODinitial = 2684?mg?O2?L?1), and the water produced can be used for irrigation or can be discharged directly into the municipal wastewater system for tertiary treatment.     

The Mayo Clinic Florida Microdosimetric Kinetic Model of Clonogenic Survival: Application to Various Repair-Competent Rodent and Human Cell Lines

The relative biological effectiveness (RBE) calculations used during the planning of ion therapy treatments are generally based on the microdosimetric kinetic model (MKM) and the local effect model (LEM). The Mayo Clinic Florida MKM (MCF MKM) was recently developed to overcome the limitations of previous MKMs in reproducing the biological data and to eliminate the need for ion-exposed in vitro data as input for the model calculations. Since we are considering to implement the MCF MKM in clinic, this article presents (a) an extensive benchmark of the MCF MKM predictions against corresponding in vitro clonogenic survival data for 4 rodent and 10 cell lines exposed to ions from ¹H to ²³⁸U, and (b) a systematic comparison with published results of the latest version of the LEM (LEM IV). Additionally, we introduce a novel approach to derive an approximate value of the MCF MKM model parameters by knowing only the animal species and the mean number of chromosomes. The overall good agreement between MCF MKM predictions and in vitro data suggests the MCF MKM can be reliably used for the RBE calculations. In most cases, a reasonable agreement was found between the MCF MKM and the LEM IV.     

Spanish Melon Landraces: Revealing Useful Diversity by Genomic,Morphological, and Metabolomic Analysis

Spain is a secondary centre of the diversification of the melon (Cucumis melo L.), with high diversity represented in highly appreciated landraces belonging to the Flexuosus and Ibericus groups. A collection of 47 accessions of Flexuosus, Chate, Piel de Sapo, Tendral, Amarillo, Blanco, and Rochet was analysed using a genotyping-by-sequencing (GBS) approach. A total of 66,971 quality SNPs were identified. Genetic analysis differentiated Ibericus accessions and exotic materials (Ameri, Momordica, Kachri, and Agrestis), while Flexuous accessions shared ancestry between them. Within the Ibericus group, no clear genomic distinction could be identified for the different landraces evaluated, with accessions of different landraces showing high genetic similarity. The morphological characterization confirmed that the external colour and fruit shape had been used as recognition patterns for Spanish melon landraces, but variability within a landrace exists. Differences were found in the sugars and acid and volatile profiles of the materials. Flexuosus and Chate melons at the immature commercial stage accumulated malic acid and low levels of hexoses, while Ibericus melons accumulated high contents of sucrose and citric acid. Specific trends could be identified in the Ibericus landraces. Tendral accumulated low levels of sugars and citric acid and high of malic acid, maintaining higher firmness, Rochet reached higher levels of sugars, and Amarillo tended to lower malic acid contents. Interestingly, high variability was found within landraces for the acidic profile, offering possibilities to alter taste tinges. The main volatile organic compounds (VOCs) in Flexuosus and Chate were aldehydes and alcohols, with clear differences between both groups. In the Ibericus landraces, general trends for VOC accumulation could be identified, but, again, a high level of variation exists. This situation highlights the necessity to develop depuration programs to promote on-farm in situ conservation and, at the same time, offers opportunities to establish new breeding program targets and to take advantage of these sources of variation.     

Application of Fast Gas Chromatography–Mass Spectrometry in Combination with the QuEChERS Method for the Determination of Pesticide Residues in Fruits and Vegetables

A fast gas chromatography–mass spectrometry method has been developed for multiresidue determination of up to 56 pesticides in fruits and vegetables in a chromatographic run time of <10 min, using a single quadrupole mass spectrometer operating in selected ion monitoring mode. The well-known acetate-buffering version of the QuEChERS method has been used for sample preparation. Programmable temperature vaporizer injection of 3 μL allowed reaching limits of detection between 0.15 and 15 μg/kg for most compounds in the sample matrices tested. The applicability of the method has been evaluated in apple, orange, carrot, and tomato. Recoveries at three fortification levels (0.01, 0.1 and 0.5 mg/kg) ranged from 70 to 120 % for most compounds, with relative standard deviations below 20 % in all cases. The developed method has been applied to fruit and vegetable samples from different Spanish provinces.     

Contour-based focus of attention mechanism to speed up object detection and labeling in 3D scenes

In this paper, a contour-based focus of attention approach is presented. Fast to compute, contour based features are extracted from 3D scenes and matched to model parts of objects. Local reference frames associated with the features induce a translation and rotation, resulting in a vote being cast for the presence of the object in a certain position within the scene. In these positions, HoG features are extracted and SVM classification is applied. Detection results and computation times are compared to those corresponding to a sliding window approach.     

Experimental evaluation of geosynthetics as reinforcement for shotcrete

One of the commonly used stabilization systems for rock tunnels is shotcrete. This fine aggregate mortar is usually reinforced for improving its tensile and shear strength. In deep tunnels, its capacity to absorb energy has been recently considered for design purposes, as large displacements of the wall are expected. Two of the most used materials of reinforcement are steel welded-wire mesh and fibers (steel or polypropylene) in the shotcrete mix. This study presents the results and discussion of an experimental test program conducted to obtain the load-deformation curves of reinforced shotcrete, according to ASTM C 1550, using geosynthetics grids and geotextiles as alternative reinforcement materials. In addition, plain shotcrete and steel welded-wire mesh reinforced shotcrete specimens are also considered in the experimental program as benchmark cases. The experimental results are analyzed in terms of maximum strength and toughness. Results show that the use of geosynthetics as a reinforcement material is a promising alternative to obtain shotcrete with energy absorption capacity comparable with the most common reinforcement materials used.     

Structural and electrical properties of grain boundaries in Ce0.85Gd0.15O1.925 solid electrolyte modified by addition of transition metal ions

In this work we present studies on applicability of transition metal additives as sintering and electrical conductivity aids for cerium gadolinium oxide electrolyte. The nanosized Ce_0.85Gd_0.15O_1.925 powder obtained by coprecipitation method was modified with Cr³⁺, Fe³⁺, Ni²⁺ or Cu²⁺ ions. Using high-intensity high-resolution X-ray powder diffraction data we have determined that Cr, Fe and Ni ions do not incorporate into the cerium gadolinium oxide surface or bulk when sintered at 1300 °C, but react with Gd ions to form Cr_0.9Gd_0.1O, GdFeO₃ and GdNiO₃ phases, while Cu incorporates in the material up to 0.7 mol% with a significant fraction of remaining material showing poorly crystalline CuO phase. The nanosized Ce_0.85Gd_0.15O_1.925 material shows already improved sintering properties than previous reports but full sintering is not achieved below 1300 °C, however Cr, Fe and mainly Cu impregnation allows full sintering at 1300 °C. 0.5 mol% Ni impregnated material sintered at 1500 °C shows enhanced grain boundary conductivity that probably indicates that Ni incorporates into Ce_0.84Gd_0.15O_1.925 above 1300 °C. The global results indicate, however, that optimization of ceria microstructure is at least of equal importance for sinterability and grain boundary conductivity than impregnation of the material with transition metal ions.