Studies on applications of lypolytic enzymes in detergency II. Evaluation of adaptability of various kinds of lipases in practical laundry conditions

Journal of the American Oil Chemists' Society - Kinetic parameter of hydrolysis, degree of hydrolysis, pH and temperature characteristics and positional specificity of hydrolysis of seven kinds...     

Advances in speech transcription at IBM under the DARPA EARS program

This paper describes the technical and system building advances made in IBM's speech recognition technology over the course of the Defense Advanced Research Projects Agency (DARPA) Effective Affordable Reusable Speech-to-Text (EARS) program. At a technical level, these advances include the development of a new form of feature-based minimum phone error training (fMPE), the use of large-scale discriminatively trained full-covariance Gaussian models, the use of septaphone acoustic context in static decoding graphs, and improvements in basic decoding algorithms. At a system building level, the advances include a system architecture based on cross-adaptation and the incorporation of 2100 h of training data in every system component. We present results on English conversational telephony test data from the 2003 and 2004 NIST evaluations. The combination of technical advances and an order of magnitude more training data in 2004 reduced the error rate on the 2003 test set by approximately 21% relative-from 20.4% to 16.1%-over the most accurate system in the 2003 evaluation and produced the most accurate results on the 2004 test sets in every speed category.     

Elevated levels of tumor necrosis factor-alpha (TNF-alpha) and interleukin-6 (IL-6) activities in the sera and milk of cows with naturally occurring coliform mastitis

The presence of tumor necrosis factor-alpha (TNF-alpha) and interleukin-6 (IL-6) activities was determined in milk and serum of cows with naturally occurring coliform mastitis (CFM). TNF-alpha was detected in the sera from 26 of 32 cows with CFM. TNF-alpha levels were higher in the sera than in the milk. IL-6 was high in the sera of surviving CFM animals, but was low in animals that died and in healthy controls. Furthermore, the mean level of IL-6 was 20-fold higher in the milk than in the sera of mastitic cows. The level of IL-6 in the serum was correlated to that in the milk in individual animals. The presence of IL-6 and TNF-alpha in the sera appears to relate to severe clinical condition of CFM, in the milk whereas they may play a role in generating inflammation of the mammary gland.     

Surface geometry of slide bearings after percussive burnishing

A review of literature about the effect of oil pockets on improvement of sliding elements tribological performance as well as about the changes of surface topography during “zero-wear” process is shown. The paper presents also the results of experimental investigations done in the Department of Manufacturing Processes and Production Organisation of Rzeszow University of Technology, connected with the creation of oil pockets on sliding surfaces. In order to simulate a deterministic surface a program for the visualisation of pits was written. The procedures for assessment of the oil pocket size of specific shape and oil pockets coverage are presented. The tendencies of changes of surface topography and oil pockets dimensions during “zero-wear” process are also described.     

Design of High-Quality Pt–CeO2 Composite Anodes Supported by Carbon Black for Direct Methanol Fuel Cell Application

A Pt on nano-sized CeO₂ particles that in turn are supported on carbon black (CB) was synthesized using the co-impregnation method. This potential anode material for fuel cell applications was synthesized in a stepwise process. The pure CeO₂ was synthesized using an ammonium carbonate precipitation method, and the Pt particles dispersed on the CeO₂ in such a way that a uniform dispersion with the CB was obtained (Pt–CeO₂/CB). The electrochemical activity of the methanol (CH₃OH) oxidation reaction on the Pt–CeO₂/CB was investigated using cyclic voltammetry and chronoamperometry experimentation. The onset potential of CH₃OH oxidation reaction on the Pt–CeO₂/CB anode was shifted to a lower potential as compared with that on commercially available Pt–Ru/carbon (C) alloy anode. In addition, the activation energy of the Pt–CeO₂/CB anode was much lower than that of the Pt–Ru/C alloy anode. Moreover, the current density of the Pt–CeO₂/CB anode was much higher than that of the Pt–Ru/C alloy anode at temperatures between 28° and 60°C. These results suggest that the anode performance of the Pt–CeO₂/CB anode at the operating temperature of typical fuel cells (80°C) is superior to that of the more usual Pt–Ru/C alloy anode. Importantly, the rare metal, Ru, is not required in the present anode material and the amount of Pt required is also significantly reduced. As a consequence, we report a promising candidate Pt–CeO₂/CB composite anode for application in the development of direct methanol fuel cells.     

Silicon‐containing heterocyclic polymers and thin films made therefrom

Thin films, in the range of tens of micrometers thickness, have been prepared by casting onto glass plates the chloroform or N‐methylpyrrolidone solutions of polyimides or poly(imide‐amide)s containing silicon and phenylquinoxaline units in the main chain. The polymers have been synthesized by solution polycondensation reaction of aromatic diamines having preformed phenylquinoxaline rings with bis(3,4‐dicarboxyphenyl)dimethylsilane dianhydride or with a diacid chloride resulting from the reaction of this dianhydride with p‐aminobenzoic acid. The polymers were easily soluble in polar aprotic solvents and showed high thermal stability. The free‐standing films exhibited good mechanical properties with tensile strengths in the range of 48–86 MPa, tensile modulus in the range of 1.25–2.22 GPa and elongation at break in the range of 3–37%. Electrical insulating properties of some polymer films were evaluated on the basis of dielectric constant and dielectric loss and their variation with frequency and temperature. The values of the dielectric constant at 10 kHz were in the range of 2.94–3.08 for polyimides and 3.89–4.49 for poly(imide‐amide)s. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3062–3068, 2006     

<Emphasis Type="Italic">In situ</Emphasis> monitoring of solid fat content by means of pulsed nuclear magnetic resonance spectrometry and ultrasonics

An ultrasonic technique was developed to study the crystallization process of edible fats on-line. A chirp wave was used instead of the conventional pulser signal, thus achieving a higher signal-to-noise ratio. This enabled measurements to be made in concentrated systems [≈20% solid fat content (SFC)] through a 8.11-cm thick sample without significant signal loss. Fat samples were crystallized at 20, 25, and 30°C at a constant agitation rate of 400 rpm for 90 min. The crystallization process was followed by ultrasonic spectroscopy and a low-resolution pulsed nuclear magnetic resonance spectrometer. Specific relationships were found between ultrasonic parameters [integrated response, time of flight (TF), and full width half maximum] and SFC. TF, which is an indirect measurement of the ultrasonic velocity (v), was highly correlated to SFC (r ²>0.9) in a linear fashion (v=2.601 SFC+1433.0).