A data collection protocol for real-time sensor applications

The nature of many sensor applications as well as continuously changing sensor data often imposes real-time requirements on wireless sensor network protocols. Due to numerous design constraints, such as limited bandwidth, memory and energy of sensor platforms, and packet collisions that can potentially lead to an unbounded number of retransmissions, timeliness techniques designed for real-time systems and real-time databases cannot be applied directly to wireless sensor networks. Our objective is to design a protocol for sensor applications that require periodic collection of raw data reports from the entire network in a timely manner. We formulate the problem as a graph coloring problem. We then present TIGRA (Timely Sensor Data Collection using Distributed Graph Coloring) — a distributed heuristic for graph coloring that takes into account application semantics and special characteristics of sensor networks. TIGRA ensures that no interference occurs and spatial channel reuse is maximized by assigning a specific time slot for each node. Although the end-to-end delay incurred by sensor data collection largely depends on a specific topology, platform, and application, TIGRA provides a transmission schedule that guarantees a deterministic delay on sensor data collection.     

Harmonic-balance analysis and synthesis of coupled-oscillator arrays

A new harmonic-balance technique for the analysis and synthesis of coupled-oscillator systems with adjustable phase progression is presented here. It allows an accurate determination of the phase-shift versus the tuning elements, since detailed models are used for the individual oscillator circuits. It is also possible to impose the synchronization frequency at which the in-phase oscillation takes place and calculate the values of the tuning elements for a pre-fixed phase distribution. The phase noise of the system is analyzed through the carrier modulation approach. The phase-change rapidity versus a control voltage is analyzed through the envelope-transient method. A four-element oscillator array at 5 GHz has been designed through this method and experimentally characterized obtaining very good agreement with the simulation results.     

Analysis and simulation of the effects of distributed nonlinearities in microwave superconducting devices

This paper presents a comprehensive study of microwave nonlinearities in superconductors, with an emphasis on intermodulation distortion and third-harmonic generation. It contains the analysis of various resonant and nonresonant test devices and its validation using numerical simulations based on harmonic balance (HB). The HB simulations made on test devices show that the closed-form equations for intermodulation and third-harmonic generation are only valid at low power levels. The paper also contains examples of application of HB to illustrate that this technique is useful to simulate superconductive devices other than simple test devices, and that the validity of the simulations is not restricted to low drive power levels. Most of the analyses and simulations of this paper are based on electrical parameters that describe the nonlinearities in the superconducting material. These parameters are compatible with many existing models of microwave nonlinearities in superconductors. We discuss the particulars on how to relate these electrical parameters with one of the existing models that postulates that the nonlinear effects are due to a dependence of the penetration depth on the current density in the superconductor.     

Analytical analysis of applying packet fragmentation mechanism on IEEE 802.11b DCF network in non ideal channel with infinite load conditions

The analytical modeling and performance analysis of the 802.11 network in all its various extensions (802.11b, 802.11a, 802.11g, 802.11e, 802.11n, etc.) have already been widely explored over the past years. However, the packet fragmentation mechanism (PFM), which is proposed by the IEEE work group to reduce the impact of bit error rate (BER) on the packet error rate (PER), has not been considered in the analytical models proposed in the literature. Yet, the PFM constitutes a key parameter to achieve the best performances of 802.11 networks. In this paper, we extend the Bianchi’s Markov chain model with the PFM and the PER. Then, we analyze the performance improvement level achieved with the PFM in an IEEE 802.11 network under the impact of BER and packet length. The proposed analysis has been applied on the basic access method of 802.11b network in saturated traffic conditions. So, we have analyzed the throughput and the mean response time of the 802.11 network. The obtained theoretical results are validated by simulation.     

Candida albicans homologue of GGP1/GAS1 gene is functional in Saccharomyces cerevisiae and contains the determinants for glycosylphosphatidylinositol attachment

The GGP1/GAS1/CWH52 gene of Saccharomyces cerevisiae encodes a major exocellular 115 kDa glycoprotein (gp115) anchored to the plasma membrane through a glycosylphosphatidylinositol (GPI). The function of gp115 is still unknown but the analysis of null mutants suggests a possible role in the control of morphogenesis. PHR1 gene isolated from Candida alibicans is homologous to the GGP1 gene. In this report we have analysed the ability of PHR1 to complement a ggp1Δ mutation in S. cerevisiae. The expression of PHR1 controlled by its natural promoter or by the GGP1 promoter has been studied. In both cases we have observed a complete complementation of the mutant phenotype. Moreover, immunological analysis has revealed that PHR1 in budding yeast gives rise to a 75–80 kDa protein anchored to the membrane through a GPI, indicating that the signal for GPI attachment present in the C. albicans gene product is functional in S. cerevisiae.     

Bromine, Chlorine, and Iodine Determination in Soybean and its Products by ICP-MS After Digestion Using Microwave-Induced Combustion

A method for bromine, chlorine, and iodine determination in soybean and related products was developed by inductively coupled plasma mass spectrometry (ICP-MS) after digestion by microwave-induced combustion (MIC). Samples were pressed as pellets and combusted using pressurized oxygen (20 bar) and ammonium nitrate solution (50 μL of 6 mol L^?1) as the igniter. Analytes were absorbed in alkaline solution (100 mmol L^?1 NH₄OH), and a reflux step of 5 min, microwave power of 1,400 W, was applied after combustion in order to improve analyte recoveries. For Cl determination by ICP-MS, a dynamic reaction cell was used with ammonia as the reaction gas. The accuracy was evaluated using certified reference materials (CRMs) and spiked samples. Using MIC, the agreement with CRM values and spike recoveries was higher than 95 % for all analytes for certified reference materials of a similar composition (National Institute of Standards and Technology (NIST), corn bran and NIST, whole milk). Limits of detection were 0.03, 1.2, and 0.002 μg g^?1 for Br, Cl, and I, respectively. The residual carbon content in the digests obtained after MIC procedure was lower than 0.5 %. Blanks were always negligible and no memory effects were observed. Digestion by MIC allowed processing up to eight samples by each run in 25 min with high efficiency of digestion providing a suitable medium for further bromine, chlorine, and iodine determination by ICP-MS.     

Sirtuin 7 Deficiency Reduces Inflammation and Tubular Damage Induced by an Episode of Acute Kidney Injury

Acute kidney injury (AKI) is a public health problem worldwide. Sirtuins are a family of seven NAD+-dependent deacylases, Overexpression of Sirtuin 1, 3, and 5 protect against AKI. However, the role of Sirtuin 7 (Sirt7) in AKI is not known. Here, we analyzed how Sirt7 deficient mice (KO-Sirt7) were affected by AKI. As expected, wild-type and Sirt7 heterozygotes mice that underwent renal ischemia/reperfusion (IR) exhibited the characteristic hallmarks of AKI: renal dysfunction, tubular damage, albuminuria, increased oxidative stress, and renal inflammation. In contrast, the KO-Sirt7+IR mice were protected from AKI, exhibiting lesser albuminuria and reduction in urinary biomarkers of tubular damage, despite similar renal dysfunction. The renoprotection in the Sirt7-KO+IR group was associated with reduced kidney weight, minor expression of inflammatory cytokines and less renal infiltration of inflammatory cells. This anti-inflammatory effect was related to diminished p65 expression and in its active phosphorylation, as well as by a reduction in p65 nuclear translocation. Sirt7 deficient mice are protected from AKI, suggesting that this histone deacetylase promotes tubular damage and renal inflammation. Therefore, our findings indicate that Sirt7 inhibitors may be an attractive therapeutic target to reduce NFκB signaling.     

Effect of itaconic acid on the wet scrub resistance of highly pigmented paints for architectural coatings

This study investigates the influence of carboxylic monomers, such as itaconic acid (IA), on the colloidal properties of the latexes made by semi-continuous emulsion copolymerization of styrene (STy) with n-butyl acrylate (BA). A number of copolymerization runs were carried out with different IA concentrations. The effect of functional monomer on the overall conversion, the colloidal properties of the latexes, and the distribution of the carboxylic groups (buried, particle surface and aqueous phase) were examined. The carboxylic groups present in the latexes were analyzed using conductimetric and potentiometric titrations. The behavior of the IA on the wet scrub resistance of highly pigmented paints for architectural coatings was examined and correlated with the distribution of the carboxylic groups. The results obtained showed that the properties of highly pigmented paints are greatly dependent on the amount and distribution of the carboxylic groups. The carboxylic acid distributed in the aqueous phase has a strong influence on the wet scrub resistance and on the characteristics of the final products.     

Evaluation of emu oil extraction methods and their effects on physical and rheological behavior

In this study we evaluated the efficiency of six extraction methods for emu fat based on the quantification of yield, color, density, refraction index, and rheological behavior. Both physical methods (Bain Marie, rotary evaporator, fusion, ultrasound, and microwave) and chemical methods (solvents) were evaluated. Oil properties were compared with commercial emu oil as a reference. Solvent‐based extraction produced the greatest yield (72.8%). Among the physical methods, the greatest yield was produced by the ultrasound method (42.8%). In general, properties were similar to those reported for vegetable oils. The rotary evaporator method showed the greatest difference in total color (ΔE) in comparison with a commercially‐produced reference, while the fusion method showed the smallest ΔE. No statistically significant differences were found between the density and refraction index of the treated samples and those of the reference. Kinematic viscosity increased significantly in samples extracted via microwave method. All samples displayed pseudoplastic behavior. The data showed a good fit to the power law model (R² > 0.90). The consistency coefficient and flow behavior index were determined for all methods. Practical applications: Therapeutic applications for oil have been posited for emu oil. In pharmaceutical products, oils are used as emollients and as carriers for medicinal substances. The practical importance of an oil depends on its physical properties, thus a thorough understanding of those physical properties is very important for identifying potential applications. These properties are affected by the extraction method employed; the present paper evaluates the effects of a range of extraction methods on yield efficiency, as well as physical and rheological properties. Novel extraction methods such as ultrasound and microwave are also evaluated in this study.     

Thermodynamics of gas-solid flow

New thermodynamic fundamentals for vertical pneumatic conueying are proposed with derivation based strictly on mass conservation and continuum concept. For a 1-D, vertical, steady gas-solid flow, these new mass and energy balances allowed the derivation of a new nondimensional energy factor containing the pressure drop. This energy factor correlated quite well with the difference between the inlet gas velocity and solids terminal velocity, when tested against high-pressure, 15-m-high, vertical pneumatic transport data from Institute of Gas Technology. The energy factor was also checked against atmospheric-pressure data of the 5-m lift line of the Pennsylvania State Uniuersity. The new energy factor covers quite well both the atmospheric- and high-pressure sets of data (923 tests) including two heights, lean- and dense-phase transports, several pipe diameters, broad and narrow particle-size distributions, and different materials. The dissipation terms in gas-solid flow were also clearly identified.