Hydrocarbon exploration risk evaluation through uncertainty and sensitivity analyses techniques

The evaluation of the exploration risk in the oil industry is a fundamental component of the decision process related to the exploratory phase. In this paper the two basic components of the exploratory risk: trap geometry and trapped hydrocarbon quantities (fluid), are compounded in a single coherent uncertainty and sensitivity approach. The results clarify that the model geometry influences each Petroleum System Modeling step and that the geometric uncertainty is correlated with the fluid uncertainty. The geometric uncertainty evaluation makes use of geostatistical techniques that produce a number of possible realizations of the trap geometry, all compatible with available data. The evaluation of the fluid uncertainty, through a Monte Carlo methodology, allows us to compute the possible quantities of oil and gas, generated in a basin and migrated from the hydrocarbon source location to each single trap. The final result is the probability distribution of oil and gas for each trap in the basin, together with other useful indicators like: the hydrocarbon filling probability map, the closure probability map, the drainage area probability map, the spilling paths probabilities, the trap-filling scenarios.     

Assessing Human Impact of Organizational Crises: Reliability and Validity of the Triage Assessment Scale for Organizations (TAS:O)

The present study evaluated the reliability and validity of the Triage Assessment Survey: Organizations (TAS:O), a 27-item, 5-point, Likert summated rating scale. One hundred and seventeen participants responded to the TAS:O after reading mild, moderate, marked and severe organizational crisis scenarios. The overall Cronbach's alpha and split-half reliability were both .93. Confirmatory factor analysis revealed three factors, supporting the hypothesis that the TAS:O is comprised of three distinct factors (i.e., Affect, Behavior, and Cognition). An analysis of variance provided evidence that the TAS:O has the capacity to distinguish among mild, moderate, marked, and severe crises. Because this research is the first to evaluate the TAS:O, further studies are needed to strengthen confidence in the psychometric properties of this scale.     

Response of shielding structures to explosive loading

This paper presents the results of a numerical and experimental study of the behaviour of a brass hopper held in a supporting structure subjected to internal explosive loading. The structure is typical of those employed during the manufacture of explosive accessories. In such processes the hopper acts as a feed for the explosive while the encasing structure both supports the hopper and provides protection to the surroundings in the event of accidental initiation. The finite element model includes representations of the explosive, the brass hopper and the steel supporting structure. The boundaries between the components are treated as sliding and separable interfaces. Analysis is performed using the Oasys DYNA3D (version 5.1) finite element program. The numerical predictions for the deformations are compared with test results. The DYNA3D finite element code is shown to be an effective tool for the appriasal of this type of protective structure under explosive loading. Both the numerical and experimental studies point the way to improvements in the current design.     

The SCD – Stem Cell Differentiation ESA Project: Preparatory Work for the Spaceflight Mission

Due to spaceflight, astronauts experience serious, weightlessness-induced bone loss because of an unbalanced process of bone remodeling that involves bone marrow mesenchymal stem cells (BMSCs), as well as osteoblasts, osteocytes, and osteoclasts. The effects of microgravity on osteo-cells have been extensively studied, but it is only recently that consideration has been given to the role of BMSCs. Previous researches indicated that human BMSCs cultured in simulated microgravity (sim-μg) alter their proliferation and differentiation. The spaceflight opportunities for biomedical experiments are rare and suffer from a number of operative constraints that could bias the validity of the experiment itself, but remain a unique opportunity to confirm and explain the effects due to microgravity, that are only partially activated/detectable in simulated conditions. For this reason, we carefully prepared the SCD – STEM CELLS DIFFERENTIATION experiment, selected by the European Space Agency (ESA) and now on the International Space Station (ISS). Here we present the preparatory studies performed on ground to adapt the project to the spaceflight constraints in terms of culture conditions, fixation and storage of human BMSCs in space aiming at satisfying the biological requirements mandatory to retrieve suitable samples for post-flight analyses. We expect to understand better the molecular mechanisms governing human BMSC growth and differentiation hoping to outline new countermeasures against astronaut bone loss.     

Selective voltammetric determination of electroactive neuromodulating species in biological samples using iron(II) phthalocyanine modified multi-wall carbon nanotubes paste electrode

Iron(II) phthalocyanine (FePc) modified multi-wall carbon nanotubes paste electrodes (MWCNTPEs) were used as voltammetric sensors to selectively detect dopamine (DA) in the presence of serotonin (5-HT). The electrochemical behavior of DA at the new modified electrode was investigated using CV. The enhanced current response of DA indicates that FePc modification of the MWCNTPE surface results in a high catalytic activity for the redox reaction of DA. Differential pulse voltammetry was applied in detection of DA and 5-HT at FePc-MWCNTPE. The method parameters were optimized. Detection limit of 2.05 × 10⁻⁷ M was obtained for DA by using the electrocatalytic oxidation signal corresponding to the Fe^II/Fe^III redox process. The separation between the peak potentials of DA and 5-HT is 170 mV which is large enough for the simultaneously, selective determination of the two chemical species in their mixtures. There was no electrochemical response for ascorbic acid (AA) added in the sample. The monoamine neurotransmitter measuring method has been tested in analyzing deproteinized serum samples.     

Registration of confocal scanning laser microscopy and quantitative backscattered electron images for the temporospatial quantification of mineralization density in 18-month old thoroughbred racehorse articular calcified cartilage

Combined backscattered electron scanning electron microscopy (BSE SEM) and confocal scanning laser microscopy (CSLM) have been used to put tissue mineralization data into the context of soft tissue histology and fluorescent label information. Mineralization density (Dm) and linear accretion rate (LAR) are quantifiable parameters associated with mineralizing fronts within calcified tissues. Quantitative BSE (qBSE) may be used to determine Dm, while CSLM may be used to detect label fluorescence from which LAR is calculated. Eighteen-month old Thoroughbred horses received single calcein injections 19 and 8 days prior to euthanasia, labeling sites of active mineralization with fluorescent bands. Confocal scanning laser microscopy images of articular calcified cartilage (ACC) from distal third metacarpal condyles were registered to qBSE images of the same sites using an in-house program. ImageJ and Sync Windows enabled the simultaneous collection of LAR and Dm data. The repeatability of the registration and measurement protocols was determined. Dm profiles between calcein labels were explored for an association with time. Dm was 119.7 +/- 24.5 (mean +/- standard deviation) gray levels (where 0 = backscattering from monobrominated and 255 from monoiodinated dimethacrylate standards, respectively), while modal and maximum LAR were 0.45 and 3.45 microm/day, respectively. Coefficients of variation (CV) for Dm were 0.70 and 0.77% with and without repeat registration, respectively; CVs for LAR were 1.90 and 2.26% with and without repeat registration, respectively. No relationship was identified between Dm and time in the 11-day interlabel interval. Registration of CSLM to qBSE images is sufficiently repeatable for quantitative studies of equine ACC.     

Polymer Encapsulated Liposomes for Oral Co-Delivery of Curcumin and Hydroxytyrosol

Curcumin (Cur) is a hydrophobic polyphenol from the rhizome of Curcuma spp., while hydroxytyrosol (HT) is a water-soluble polyphenol from Olea europaea. Both show outstanding antioxidant properties but suffer from scarce bioavailability and low stability in biological fluids. In this work, the co-encapsulation of Cur and HT into liposomes was realized, and the liposomal formulation was improved using polymers to increase their survival in the gastrointestinal tract. Liposomes with different compositions were formulated: Type 1, composed of phospholipids and cholesterol; Type 2, also with a PEG coating; and Type 3 providing an additional shell of Eudragit^® S100, a gastro-resistant polymer. Samples were characterized in terms of size, morphology, ζ-potential, encapsulation efficiency, and loading capacity. All samples were subjected to a simulated in vitro digestion and their stability was investigated. The Eudragit^®S100 coating demonstrated prevention of early releases of HT in the mouth and gastric phases, while the PEG shell reduced bile salts and pancreatin effects during the intestinal digestion. In vitro antioxidant activity showed a cumulative effect for Cur and HT loaded in vesicles. Finally, liposomes with HT concentrations up to 40 μM and Cur up to 4.7 μM, alone or in combination, did not show cytotoxicity against Caco-2 cells.     

The Greatwall–Endosulfine Switch Accelerates Autophagic Flux during the Cell Divisions Leading to G1 Arrest and Entry into Quiescence in Fission Yeast

Entry into quiescence in the fission yeast Schizosaccharomyces pombe is induced by nitrogen starvation. In the absence of nitrogen, proliferating fission yeast cells divide twice without cell growth and undergo cell cycle arrest in G1 before becoming G0 quiescent cells. Under these conditions, autophagy is induced to produce enough nitrogen for the two successive cell divisions that take place before the G1 arrest. In parallel to the induction of autophagy, the Greatwall–Endosulfine switch is activated upon nitrogen starvation to down-regulate protein phosphatase PP2A/B55 activity, which is essential for cell cycle arrest in G1 and implementation of the quiescent program. Here we show that, although inactivation of PP2A/B55 by the Greatwall–Endosulfine switch is not required to promote autophagy initiation, it increases autophagic flux at least in part by upregulating the expression of a number of autophagy-related genes.     

Early Osteogenic Marker Expression in hMSCs Cultured onto Acid Etching-Derived Micro- and Nanotopography 3D-Printed Titanium Surfaces

Polyetheretherketone (PEEK) titanium composite (PTC) is a novel interbody fusion device that combines a PEEK core with titanium alloy (Ti6Al4V) endplates. The present study aimed to investigate the in vitro biological reactivity of human bone-marrow-derived mesenchymal stem cells (hBM-MSCs) to micro- and nanotopographies produced by an acid-etching process on the surface of 3D-printed PTC endplates. Optical profilometer and scanning electron microscopy were used to assess the surface roughness and identify the nano-features of etched or unetched PTC endplates, respectively. The viability, morphology and the expression of specific osteogenic markers were examined after 7 days of culture in the seeded cells. Haralick texture analysis was carried out on the unseeded endplates to correlate surface texture features to the biological data. The acid-etching process modified the surface roughness of the 3D-printed PTC endplates, creating micro- and nano-scale structures that significantly contributed to sustaining the viability of hBM-MSCs and triggering the expression of early osteogenic markers, such as alkaline phosphatase activity and bone-ECM protein production. Finally, the topography of 3D-printed PTC endplates influenced Haralick’s features, which in turn correlated with the expression of two osteogenic markers, osteopontin and osteocalcin. Overall, these data demonstrate that the acid-etching process of PTC endplates created a favourable environment for osteogenic differentiation of hBM-MSCs and may potentially have clinical benefit.