Crystallization of progesterone polymorphs using polymer-induced heteronucleation (PIHn) method

Progesterone is a natural hormone steroid used in humans for several treatments and in livestock for artificial insemination, which exhibits two polymorphic forms at ambient conditions: form 1 and form 2. Form 2 is metastable and more soluble than form 1; however, it is not suitable to use as powder raw material because it transforms into form 1 by the effects of grinding. A polymorphic screening of progesterone based on polymer-induced heteronucleation method was performed as an alternative to prepare the metastable form. Polyvinyl alcohol, hydroxypropyl methylcellulose (HPMC), dextran, gelatin, polyisoprene (PI) and acrylonitrile-butadiene (NBR) copolymer were used. Crystals were prepared from 0.5, 10 and 40?mg/mL solutions in acetone at room temperature by solvent evaporation. The samples were characterized by X-ray powder diffraction, differential scanning calorimetry (DSC), scanning electron microcopy and attenuated total reflectance infrared Fourier transform spectroscopy. Form 1 was nucleated from 40?mg/mL solutions on the six polymers and from 10?mg/mL solutions on PI and NBR. The mixture of form 1 and form 2 was obtained from 10?mg/mL solution on HPMC, dextran and gelatin and from 0.5?mg/mL solution crystallizations. Therefore, the polymeric devices, which crystallized the metastable and more soluble polymorph (2) of progesterone, would be a promissory alternative for the pharmaceutical applications.     

Mechanical improvement of concrete by irradiated polypropylene fibers

Fiber reinforced concrete (FRC) contains fibers physically mixed with gravel, sand, cement, and water. So far, adequate mechanical performance of FRC has been obtained at high cost and using complex technologies; important here is the geometry and surface characteristics of the polymers. We have modified polymeric‐fiber surfaces by using gamma radiation. Irradiated polypropylene (PP) fibers were submitted to 0, 5, 10, 50, and 100 kGy of gamma irradiation dosages. First, tensile strength of PP fibers was evaluated, and then fibers blended at 0, 1.0, 1.5, and 2.0% in volume with Portland cement, gravel, sand, and water. The highest values of compressive strength were obtained with irradiated‐fibers at 10 kGy and 1.5% in volume of fiber. The result is 101 MPa, as compared to 35 MPa for simple concrete without fibers. POLYM. ENG. SCI., 45:1426–1431, 2005. © 2005 Society of Plastics Engineers     

Non-pinched, minimum energy distillation designs

Non-pinched, minimum energy solutions are important class of distillation designs that offer the potential advantage of a better trade-off between capital investment and operating costs. In this paper, two important tasks associated with non-pinched distillation designs are studied. Thus the novel contributions of this work to the literature are

(1) A comprehensive methodology for finding non-pinched minimum energy designs.

(2) Understanding of the reasons for the existence of non-pinched distillation designs.

It is shown that the recent shortest stripping line distance approach of Lucia et al. [Lucia, A., Amale, A. and Taylor, R., 2007, Distillation pinch points and more. Comput Chem Eng, available on-line] is capable of systematically and reliably finding non-pinched, minimum energy distillation designs. In addition, we provide an understanding of the reasons behind the existence of non-pinched designs, which include trajectories that follow unstable branches of a pinch point curve in azeotropic systems, the inherent looping structure of trajectories in hydrocarbon separations, and the presence of ancillary constraints in multi-unit processes like extraction/distillation. Several distillation examples are studied and many numerical results and geometric illustrations are presented that show the shortest stripping line distance methodology is indeed a powerful and systematic tool for computing non-pinched, minimum energy designs and that support the underlying reason we provide for the existence of non-pinched designs.     

The contribution of epidemiology to psychosomatic medicine

The G1 glycoprotein of California encephalitis (CE) virus plays a critical role in the infection of mosquito and mammalian cells. We found that CE virus enters baby hamster kidney (BHK-21) and Aedes albopictus (C6/36) cells by the endocytic pathway. Ammonium chloride, a lysosomotropic amine that prevents release of virus from endosomes, inhibited infection of both cell types when added within 10 min after viral adsorption. In addition, infected cells formed polykaryons when the extracellular pH was lowered to 6.3; optimal fusion occurred at pH 5.8 and 6.0 (C6/36 and BHK-21 cells, respectively). Two neutralizing G1 MAba, 6D5.5 and 7D4.5, inhibited low pH-induced syncytia formation without affecting viral attachment, suggesting a role for G1 in viral entry. Since viral fusion proteins have been demonstrated to undergo conformational changes at low pH, acid-induced changes in G1 and G2 were assessed. While both G1 and G2 demonstrated low pH-induced alterations in detergent binding, only G1 displayed an altered protease cleavage pattern at the fusion pH. These results indicate that the G1 protein of CE virus undergoes conformational changes necessary for low pH-mediated entry into both mosquito and mammalian cells.     

Material constant sensitivity boundary integral equation for anisotropic solids

In this paper, the material constant sensitivity boundary integral equation is presented, and its numerical solution proposed, based on boundary element techniques. The formulation deals with plane problems with general rectilinear anisotropy. Expressions for the computation of sensitivities for displacements, tractions, strains and stresses are derived, both for boundary and interior points. The sensitivities can be computed with respect to the bulk material properties or to the properties of part of the domain (inclusions, coatings, etc.). To assess the accuracy of the proposed approach, the computed results are compared to analytical ones derived from exact solutions obtained by complex potential theory, when possible, or finite difference derivatives otherwise. Copyright © 2005 John Wiley & Sons, Ltd.     

Influence of pencil lead hardness on voltammetric response of graphite reinforcement carbon electrodes

This work studied the voltammetric response of graphite reinforcement electrodes made of different pencil lead hardness. The studies showed that harder graphite leads, regardless of their manufacturer, are more appropriate as electrode material for voltammetric purposes due to their higher peak currents, increasing sensitivity and reproducibility, with ΔEp closer to the theoretical value for a reversible system.     

Symmetry properties and bifurcation analysis of a class of periodically forced chemical reactors

In this work, we discuss how periodic forcing may induce symmetry properties into mathematical models of chemical reactors. We define a class of reactors subjected to discontinuous periodic forcing, and show that all the reactors belonging to this class have spatio-temporal symmetry. This symmetry and its influence on the possible bifurcation scenarios are discussed. The bifurcation analysis is carried out with suitable discrete systems that exploit a property of the Poincaré map. In fact, it is shown that the spatio-temporal symmetry induced by the forcing makes the Poincaré map of the continuous system an iterate of another map. On this basis, a technique to implement parameter continuation methods is proposed. With such a technique, it is also possible to characterize symmetric and nonsymmetric regimes and unstable limit sets otherwise undetected with “bruteforce” approaches. Examples for reverseflow reactors and networks of n-reactors with periodically switched feed and discharge positions are presented.