Circular stereotactic callosotomy: a preliminary report. Technical note

The authors propose a new method for performing stereotactic callosotomy, which they have named circular callosotomy. The operating device is the original Riechert-Mundinger's string electrode, which can be protruded through a side window and by rotating the probe it is possible to cut the commisural pathways to the extent required. The anatomical results of the operation can be checked using MRI scanning.     

The influence of preparation conditions on the electrochemical behaviour of CuO in a Li/CuO cell

A dozen CuO samples prepared under various conditions and from different starting materials were evaluated as cathode materials for a primary Li/CuO cell. The “thin electrode” method was used for rapid evaluation of the samples. Both coulombic efficiency and discharge voltage depend considerably on the method of synthesis. No correlation was found between the specific surface area and the resistivity of the samples on the one hand and the cathode performance on the other. Best results were obtained from CuO prepared by the oxidation of Cu₂O under controlled temperature and time of oxidation.     

Solid state reactions in the Fe2O3-CaCO3-In2O3 system

The kinetics of solid-state reactions of powdered reactants were investigated by X-ray and by differential thermogravimetry in a magnetic field. Measurements revealed mutual diffusion of the Fe³⁺ and In³⁺ ions in the Fe₂O₃-In₂O₃ system heat treated for 3 h at 700 to 1400° C. Diffusion of indium into the Fe₂O₃ lattice caused a shift of the Curie temperature of the antiferromagnetic iron oxide towards lower temperatures. Only Caln₂O₄ was found between CaCO₃ and In₂O₃ up to 1400° C. Also, in the Fe₂O₃-CaCO₃-In₂O₃in system, the reaction started with the mutual diffusion of iron and indium and the forming of CaFe₂O₄. End-products were the magnetic -Ca₄Fe₁₄O₂₅ and CaFe₄O₇, and the non-magnetic CaFe₅O₇, depending on the In³⁺ concentration. Indium stabilized the magnetic calcium-iron oxide structures, shifting their Curie temperatures towards lower values.     

Motion synthesis and editing for the generation of new sign language content

Machine Translation - Existing work on the animation of signing avatars often relies on pure procedural techniques or on the playback of Motion Capture (MoCap) data. While the first solution...     

Scalable Realistic Rendering with Many‐Light Methods

Recent years have seen increasing attention and significant progress in many‐light rendering, a class of methods for efficient computation of global illumination. The many‐light formulation offers a unified mathematical framework for the problem reducing the full lighting transport simulation to the calculation of the direct illumination from many virtual light sources. These methods are unrivaled in their scalability: they are able to produce plausible images in a fraction of a second but also converge to the full solution over time. In this state‐of‐the‐art report, we give an easy‐to‐follow, introductory tutorial of the many‐light theory; provide a comprehensive, unified survey of the topic with a comparison of the main algorithms; discuss limitations regarding materials and light transport phenomena and present a vision to motivate and guide future research. We will cover both the fundamental concepts as well as improvements, extensions and applications of many‐light rendering.     

Simple and economic syntheses of some (Z)-7- and (Z)-9-alkenyl acetates,and of (E,Z)-7,9-dodecadien-1-yl acetate,the sex pheromone of the European grapevine moth,using aleuritic acid as a common starting material

Short syntheses of (Z)-7-dodecen-1-yl acetate, (Z)-7-tetradecen-1-yl acetate, (Z)-9-dodecen-1-yl acetate, and (Z)-9-tetradecen-1-yl acetate from 7-hydroxyheptanal and 9-oxononanoic acid precursors obtained by oxidative cleavage of easily available aleuritic acid are reported. The key step in these syntheses is a stereoselective Wittig reaction between aldehyde and alkyl-phosphonium salt. Wittig-Horner type reaction of 7-hydroxyheptanal and diethyl cyanomethylphosphonate gave the ,-unsaturated nitrile derivative which after protection of the hydroxyl group was reduced to the corresponding aldehyde. Wittig reaction of the latter, followed by acetylation, completed the synthesis of (E,Z)-7,9-dodecadien-1-yl acetate, the sex pheromone of the European grapevine mothLobesia botrana Schiff.     

Essential fatty acids in trout serum lipoproteins,vitellogenin and egg lipids

This paper describes evidence of (n−3) and particularly of 22∶6 (n−3) fatty acid enrichment in trout lipoproteins as well as in vitellogenin, egg lipovitellin and oil globule. Among the lipoproteins, HDL and LDL were the main forms of blood lipid transport, whereas phospholipids and cholesteryl esters are the preferential chemical carriers for (n−3) fatty acid transport. However, cholesteryl esters were less important as esterified fatty acid carriers than in man. Taken together with the data obtained in mammals, our results suggest that there may be a relationship between EFA activity and the distribution of the EFA among the lipoprotein lipid fractions in vertebrates, irrespective of the EFA series. Administration of an (n−3) fatty acid deficient diet for three months prior to trout spawning produced a significant increase in egg lipid content, primarily as a result of the increase of the oil globule composed almost exclusively of triacylglycerols. This diet decreased the 22∶6 (n−3), as well as the (n−3) fatty acid contents of lipoproteins, lipovitellin, vitellogenin and the oil globule. In contrast, the (n−3) fatty acid level was always higher in lipoproteins and lipovitellin than in the vitellogenin and the oil globule. Moreover, the relative levels of 22∶6 (n−3) and total (n−3) fatty acids were quite similar in lipoproteins and lipovitellin on the one hand, and in vitellogenin and the oil globule on the other. These findings suggest a direct relationship between the two forms of plasma lipid transport and the two egg compartments. During ovogenesis, dietary lipids seemed to be diverted from the adipose tissue and essentially deposited in the egg.     

Air impingement and intermittent drying: Application to apple and to mango

An original drying process combining air impingement and intermittent drying was studied on apple slices and mango cubes. The influence of four operating parameters (air velocity, drying/tempering periods, upper height, and air temperature) on the drying time and on the drying rate was evaluated. Continuous and intermittent drying were compared. The intermittency α = 1/7 (τ_on = 10 seconds and τ_off = 60 seconds) gave the best results. A time savings of 54% for apple and 67% for mango was reached. In continuous drying, a time savings of 4620 seconds was observed by increasing the air velocity from 6 to 40 m s^?1 for apple. Air temperatures of 328 K for apple and of 328 K or 338 K for mango were determined as optimum to prevent case‐hardening. Experimental results were fitted with the analytical solution of Fick's second law and the modified Page equation (average values R² = 0.985 and 0.961, for apple and mango, respectively). For both products, the apparent moisture diffusivity D_app, the drying constant k, the drying coefficient n, and the activation energy E_a, were identified. Activation energies calculated from the analytical solution were 30.3 and 36.8 kJ mol^?1 and were 25.4 and 30.0 kJ mol^?1 using the modified Page equation for apple and mango, respectively. Mango has an increased temperature sensitivity and thus will need less energy for drying than apple.     

Flow profile measurement in microchannel using the optical feedback interferometry sensing technique

The need to accurately measure flow profiles in microfluidic channels is well recognised. In this work, we present a new optical feedback interferometry (OFI) flow sensor that accurately measures local velocity in fluids and enables reconstruction of a velocity profile inside a microchannel. OFI is a self-aligned interferometric technique that uses the laser as both the transmitter and the receiver thus offering high sensitivity, fast response, and a simple and compact optical design. The system described here is based on a commercial semiconductor laser and has been designed to achieve a micrometer-range spatial resolution. The sensor performance was validated by reconstructing the velocity profile inside a circular cross-section flow-channel with 320  $\upmu $ m internal diameter, with a relative error smaller than 1.8 %. The local flow velocity is directly measured, thus avoiding the need for model based profile calculation and uncertainties inherent to this approach. The system was validated by successfully extracting the flow profiles in both Newtonian and shear-thinning liquids.