Effectiveness of rank correlations in curvilinear relationships

Behaviormetrika - In cases where only linear relationships are suspected, Pearson’s correlation is generally used to measure the strength of the association between variables. It is...     

Postharvest performance of fresh‐cut ‘Big Top’ nectarine as affected by dipping in chemical preservatives and packaging in modified atmosphere

Fresh‐cut ‘Big Top’ nectarines were dipped in 2% (w/v) ascorbic acid–1% (w/v) calcium lactate and stored at 4 °C for up to 12 days in 10 kPa O₂‐ and 10 kPa CO₂‐modified atmosphere packaging (MAP). The used microperforated plastic film allowed O₂ and CO₂ concentrations to reach steady values from the fifth day in storage onwards. Samples stored in MAP after chemical dipping showed the highest visual quality score, slight browning symptoms, increment in firmness and very low ethanol and acetaldehyde content. The chemical dipping also increased antioxidant capacity, probably due to the effect of ascorbic acid. The results suggested that the control of yeasts was mainly exerted by MAP, whereas only a slight effect was achieved by the chemical dipping. Therefore, MAP plus ascorbic acid/calcium lactate dipping was the best combination to preserve phytochemical content, antioxidant capacity and microbiological safety of fresh‐cut nectarines during storage.     

A brief note on thermoluminescence analysis of photosystem II and lipid peroxidation during the shelf life of ready-to-use rocket (Diplotaxis tenuifolia L.)

The quality of leafy vegetables has to be guaranteed for consumers over the whole postharvest period, usually limited to 5–7 days. The analyses to evaluate the quality of vegetables are very time- and resource consuming, so the use of qualitative markers can be much useful. The aim of this work was to evaluate the use of thermoluminescence (TL) parameters as qualitative markers of fresh-cut leafy vegetables during the shelf life. TL is a technique consisting of a cooling, followed by the progressive warming, of a preilluminated sample to reveal the different types of charge pairs as successive emission bands, which are resolved better than the corresponding decay phases recorded at constant temperature. Experiments were performed on rocket (Diplotaxis tenuifolia L.) stored at 2 °C for 7 days. During storage, several changes in TL glow curves were found. The position of the peaks showed a shift to higher temperature. The area of the peaks, relating to the photosystem II (20–65 °C), grew up lightly; whereas in the temperature range that detects lipidic peroxidation (65–140 °C), the TL emission became more than twice. These changes demonstrated that, during the shelf life, a progressive destabilization of PSII centres occurred and that lipid peroxidation products were accumulated in membranes. TL could be used to estimate the damages immediately after as well as during the storage period. This is the first time that TL was used to evaluate the quality of fresh-cut vegetables products during the shelf life.     

Sustainability of steel structures: towards an integrated approach to life-time engineering design

Nowadays, the construction sector is more and more oriented toward the promotion of sustainability in all its activities. The goal to achieve is the optimization of performances, over the whole life-cycle, with respect to environmental, economic and social requirements. According to the latest advances, the concept of sustainability applied to constructions covers a number of branches such as life-cycle costing, ecology, durability and even structural design. Several procedures and design tools have been implemented in the framework of international research. Indeed the current trend in civil engineering research is moving towards life-time engineering, with the aim to implement integrated methodologies to consider as a whole all the sustainability requirements according to time-dependent multi-performance-based design approaches. Following a general introduction of the concept of sustainability applied to constructions, this paper presents an overview of life-time engineering methodologies according to the current state-of-the-art. In particular the methods currently received by International Standards are discussed. A special focus is devoted to the durability design of metal structures with respect to the degradation phenomena able to impair the structural capacity over time. Finally a proposal towards an integrated approach to life-time engineering design of steel structures and needs for further advances are presented.     

Environmental heterogeneity patterns and assessment of trophic levels in two Mediterranean lagoons: Orbetello and Varano, Italy

The management of coastal lagoons is of particular interest due to their high economical importance. In spite of their great productivity, coastal lagoons are often impacted by human pressure which produces water eutrophication. The aim of this paper is to assess the trophic state of the two Mediterranean lagoons taking into account chemical-physical parameters, nutrient concentrations and biological parameters. Two Italian lagoons, Orbetello and Varano (respectively located in Tyrrhenian and Adriatic coast, Italy) were studied between May 2003 and April 2005. Both these systems receive treated urban outflows, agricultural effluents and rivers freshwater inputs. Field collected data showed that studied lagoons were characterized by different human and natural pressures. Orbetello showed the highest water eutrophication, highlighted by the trophic index values, while Varano showed lower eutrophication levels except for the summertime. The values of physical, chemical and biological parameters measured in Orbetello and Varano lagoons indicate that a wide spatial and seasonal gradient of the water characteristics was established during the study period, but in particular in winter. This gradient, typical of estuarine systems, was essentially due to the mixing of freshwater, seawater and anthropogenic inputs. Orbetello lagoon seemed much more affected by the urban impact and the fish-farming activities than Varano lagoon, but the latter showed a greater agriculture activities impact as showed by the remote sensing images.     

Lipid Cubic Mesophases Combined with Superparamagnetic Iron Oxide Nanoparticles: A Hybrid Multifunctional Platform with Tunable Magnetic Properties for Nanomedical Applications

Hybrid materials composed of superparamagnetic iron oxide nanoparticles (SPIONs) and lipid self-assemblies possess considerable applicative potential in the biomedical field, specifically, for drug/nutrient delivery. Recently, we showed that SPIONs-doped lipid cubic liquid crystals undergo a cubic-to-hexagonal phase transition under the action of temperature or of an alternating magnetic field (AMF). This transition triggers the release of drugs embedded in the lipid scaffold or in the water channels. In this contribution, we address this phenomenon in depth, to fully elucidate the structural details and optimize the design of hybrid multifunctional carriers for drug delivery. Combining small-angle X-ray scattering (SAXS) with a magnetic characterization, we find that, in bulk lipid cubic phases, the cubic-to-hexagonal transition determines the magnetic response of SPIONs. We then extend the investigation from bulk liquid-crystalline phases to colloidal dispersions, i.e., to lipid/SPIONs nanoparticles with cubic internal structure (“magnetocubosomes”). Through Synchrotron SAXS, we monitor the structural response of magnetocubosomes while exposed to an AMF: the magnetic energy, converted into heat by SPIONs, activates the cubic-to-hexagonal transition, and can thus be used as a remote stimulus to spike drug release “on-demand”. In addition, we show that the AMF-induced phase transition in magnetocubosomes steers the realignment of SPIONs into linear string assemblies and connect this effect with the change in their magnetic properties, observed at the bulk level. Finally, we assess the internalization ability and cytotoxicity of magnetocubosomes in vitro on HT29 adenocarcinoma cancer cells, in order to test the applicability of these smart carriers in drug delivery applications.     

Enzymatic synthesis,thermal and crystalline properties of a poly(β–amino ester) and poly(lactone-co-β–amino ester) copolymers

Ethyl 3-(4-(hydroxymethyl)piperidin-1-yl)propanoate (EHMPP) was prepared in quantitative yield under mild conditions via Michael addition reaction of 4-piperidinemethanol with ethyl acrylate. EHMPP underwent condensation polymerization in the presence of a lipase catalyst (CALB) to form poly[3-(4-(methylene)piperidin-1-yl)propanoate] (poly(MPP) or PMPP). Ring-opening and condensation copolymerization of EHMPP with ω-pentadecalactone (PDL) led to the synthesis of novel poly(PDL-co-MPP) copolymers, whose compositions were readily controlled by varying the monomer feed ratio. NMR analyses, including statistical analysis on repeating unit sequence distribution, indicate that the copolymers are totally random polymers. TGA analysis revealed that the degradation temperature of PMPP is approximately 160 °C lower than that of PPDL and that all poly(PDL-co-MPP) copolymers degrade in two well defined weight loss steps attributable to thermal degradation of MPP and PDL unit fractions in the polymers. The crystallinity of the polymers was studied by DSC analysis. Although PMPP and the copolymers rich in MPP units do not easily crystallize upon cooling from melt, the homopolymer and all copolymers obtained via precipitation from solution are semi-crystalline materials. WAXS analysis showed that the copolymers rich in PDL (≥51 mol%) crystallize in PPDL lattice and those with ≤21 mol% PDL content develop PMPP-type crystals while in the copolymer with 36 mol% PDL, PMPP-type and PPDL-type crystals co-exist. PMPP and poly(PDL-co-MPP) represent a new type of biodegradable poly(β–amino esters) that are potentially useful biomaterials for specific biomedical applications (e.g., gene delivery).