Discrete Wavelet Transform: Architectures, Design and Performance Issues

Due to the demand for real time wavelet processors in applications such as video compression [1], Internet communications compression [2], object recognition [3], and numerical analysis, many architectures for the Discrete Wavelet Transform (DWT) systems have been proposed. This paper surveys the different approaches to designing DWT architectures. The types of architectures depend on whether the application is 1-D, 2-D, or 3-D, as well as the style of architecture: systolic, semi-systolic, folded, digit-serial, etc. This paper presents an overview and evaluation of the architectures based on the criteria of latency, control, area, memory, and number of multipliers and adders. This paper will give the reader an indication of the advantages and disadvantages of each design.     

Design and Implementation of a Flexible Manufacturing Control System Using Neural Network

Design and implementation of a sequential controller based on the concept of artificial neural networks for a flexible manufacturing system are presented. The recurrent neural network (RNN) type is used for such a purpose. Contrary to the programmable controller, an RNN-based sequential controller is based on a definite mathematical model rather than depending on experience and trial and error techniques. The proposed controller is also more flexible because it is not limited by the restrictions of the finite state automata theory. Adequate guidelines of how to construct an RNN-based sequential controller are presented. These guidelines are applied to different case studies. The proposed controller is tested by simulations and real-time experiments. These tests prove the successfulness of the proposed controller performances. Theoretical as well as experimental results are presented and discussed indicating that the proposed design procedure using Elman's RNN can be effective in designing a sequential controller for event-based type manufacturing systems. In addition, the simulation results assure the effectiveness of the proposed controller to outperform the effect of noisy inputs.     

THE INFLUENCE OF LOAD MISALIGNMENT DURING UNIAXIAL LOW-CYCLE FATIGUE TESTING—I: MODELLING

Abstract— A quantitative model has been proposed which predicts the extent of lifetime scatter in low-cycle fatigue due to the influence of bending caused by load misalignment. The main components of the model are the mechanism of bending, the type of extensometer used to control strain and the fatigue characteristics of the material being assessed. Three mechanisms of bending have been studied and it is argued that the most damaging one is a consequence of a lateral offset in the centre-lines of the load-train with respect to either a machine's frame or ram. Scatter in lifetime is a maximum when strain is controlled by a single extensometer (which is generally the case) and when fatigue behaviour is dictated by crack initiation at the largest surface defect. Two types of scatter have been examined, (i) repeatability scatter due to testing practice within a single laboratory, and (ii) reproducibility scatter between laboratories. An example of the magnitude of reproducibility scatter due to bending has been given by using an equation based on the universal slopes method due to Manson.     

Structural Characterization of Different Asphaltenes of Kuwaiti Origin

Asphaltenes obtained by precipitation from crude Kuwaiti oils have been analyzed by proton magnetic resonance (¹H-NMR), carbon-13 nuclear magnetic resonance (¹³C-NMR) and Infrared (IR) spectral techniques. The molecular weight and elemental analysis were also determined. These combined analytical data were used for the characterization of these Kuwaiti oils. The asphaltenes molecular weights range from approximately 4200-6500 with an H/C ratio of 0.91-1.1 with an average 45-71% aromatic carbons. The average side chain length was of 4-6 carbons. It can also be concluded that the asphaltenes under investigation contain 5-9 sets of condensed aromatic rings joined together by bridges of alkyl chains or other hetero atoms and the average number of each of these sets of condensed aromatic rings is nearly 7. There are a number of alicyclic rings and condensed alicyclic rings in asphaltene. The IR spectra showed main molecular groups including OH, NH, SH, C=O and aliphatic and aromatic C-H's.     

Corrosion behaviour of copper-reinforced carbon electrodes in dilute hydrochloric acid solutions

The corrosion behaviour of experimentally prepared copper-reinforced carbon electrodes in dilute hydrochloric acid is investigated. The electrodes are not only directly attacked by the acid, but they are also subjected to galvanic corrosion. The baking temperature and time are the most crucial processing variables. A minimum in the corrosion rate is always achieved when the electrodes are baked at 400 °C for 1.5 h, the level depending on the copper content. The corrosion resistance increases progressively with the baking temperature as long as the baking time is less than 1.5 h. Baking for more than 1.5 h results in increasing corrosion rate. The presence of copper increases the corrosion resistance of the prepared electrodes.     

THE INFLUENCE OF LOAD MISALIGNMENT DURING UNIAXIAL LOW-CYCLE FATIGUE TESTING—II: APPLICATIONS

Abstract— Models for predicting scatter bands due to bending have been applied to four alloys, namely AISI 316L, Nimonic 101, 9 Cr-1 Mo, and IN 718. The alloys were tested extensively by 26 laboratories in an international round robin exercise sponsored by the Community Bureau of Reference (BCR) of the EC. After initially selecting data for analysis on the basis of their confirmed conformance to the ASTM bending criterion, it has been shown that in all four materials a major fraction of the data scatter could be attributed to bending. Furthermore, at the lowest strain range the predicted bending component represents the highest proportion of the experimental interlaboratory scatter. Many laboratories did not report any measure of bending and so could not be used in the initial analysis. However, a further interesting deduction from the models is that the entire BCR data-set can be encompassed within a scatter band based upon a bending criterion that is twice the allowable ASTM limit. Differences in the extent of scatter between materials at a given total strain range can be attributed to the gradient of the logarithmic plot of total strain range as a function of lifetime.     

Novel thermally and mechanically stable hydrogel for enzyme immobilization of penicillin G acylase via covalent technique

κ‐Carrageenan hydrogel crosslinked with protonated polyethyleneimine (PEI⁺) and glutaraldehyde (GA) was prepared and evaluated as a novel biocatalytic support for covalent immobilization of penicillin G acylase (PGA). The method of modification of the carrageenan biopolymer is clearly illustrated using a schematic diagram and was verified by FTIR, elemental analysis, DSC, and INSTRON using the compression mode. Results showed that the gels' mechanical strength was greatly enhanced from 3.9 kg/cm² to 16.8 kg/cm² with an outstanding improvement in the gels thermal stability. It was proven that, the control gels were completely dissolved at 35°C, whereas the modified gels remained intact at 90°C. The DSC thermogram revealed a shift in the endothermic band of water from 62 to 93°C showing more gel‐crosslinking. FTIR revealed the presence of the new functionality, aldehydic carbonyl group, at 1710 cm^?1 for covalent PGA immobilization. PGA was successfully immobilized as a model industrial enzyme retaining 71% of its activity. The enzyme loading increased from 2.2 U/g (control gel) to 10 U/g using the covalent technique. The operational stability showed no loss of activity after 20 cycles. The present support could be a good candidate for the immobilization of industrial enzymes rich in amino groups, especially the thermophilic ones. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Direct sequential evaluation of optimal orthonormal eigenvectors of the discrete Fourier transform matrix by constrained optimization

The recent emergence of the discrete fractional Fourier transform has spurred research activity aiming at generating Hermite–Gaussian-like (HGL) orthonormal eigenvectors of the discrete Fourier transform (DFT) matrix F. By exploiting the unitarity of matrix F – resulting in the orthogonality of its eigenspaces pertaining to the distinct eigenvalues – the problem decouples into finding orthonormal eigenvectors for each eigenspace separately. A Direct Sequential Evaluation by constrained Optimization Algorithm (DSEOA) is contributed for the generation of optimal orthonormal eigenvectors for each eigenspace separately. This technique is direct in the sense that it does not require the generation of initial orthonormal eigenvectors as a prerequisite for obtaining the final optimal ones. The resulting eigenvectors are optimal in the sense of being as close as possible to samples of the Hermite–Gaussian functions. The technique is found to be numerically robust because total pivoting is allowed in performing the QR matrix decomposition step. The DSEOA is proved to be theoretically equivalent to each of the Gram–Schmidt algorithm (GSA) and the sequential orthogonal Procrustes algorithm (SOPA). However the three techniques are algorithmically quite distinct. An extensive comparative simulation study shows that the DSEOA is by far the most numerically robust technique among all sequential algorithms thus paying off for its relatively long computation time.     

Irradiation of poly(vinyl chloride) with H2 plasma. II

Poly(vinyl chloride) films blended with plasticizers, stabilizers, and fillers are irradiated with a beam of H₂ plasma. The polymer partially loses its solubility in cyclohexanone. The viscosity of the soluble part decreases in the initial stages and then increases on further irradiation. Crosslinking was followed by dehydrochlorination and discoloration of the polymer. The electrical conductivity was measured as a function of the irradiation dose and time. The plasticizers enhanced the action of plasma while the stabilizers and fillers reduced it.     

Recycling of pharmaceutical waste gelatin for controlled‐release applications. I. A 2,4‐dicholorphenoxy acetic acid based system

Gelatin is a natural macromolecular protein. It contains a wide variety of amino acids in its polymer structure, and it is colorless to yellowish, water‐soluble, and tasteless. It is used as a dispersing agent, sizing medium, and coating for photographic films and in pharmaceutical formulations. In this study, biodegradable mulching, based on waste gelatin from pharmaceutical gelatin scraps (derived from pharmaceutical soft gelatin capsule production), was formulated via the casting of water solutions or suspensions into flexible and consistent films. Gelatin was blended with synthetic materials such as poly(vinyl alcohol) and other natural wastes such as sugar cane bagasse and sawdust. To all formulations, 2,4‐dichlorophenoxy acetic acid (2,4‐D) was added as a herbicide. The morphology and mechanical properties of the samples were investigated with scanning electron microscopy and tensile testing, respectively. The results showed that the produced films had controlled‐release properties. The effects of various additives and crosslinking on the films and the release of the herbicide 2,4‐D from the films were also investigated. The introduction of synthetic and natural additives reduced the release rate of 2,4‐D. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2313–2319, 2004