Advanced Surface of Fibrous Activated Carbon Immobilized with FeO/TiO2 for Photocatalytic Evolution of Hydrogen under Visible Light

FeO-doped TiO₂ nanoparticle photocatalysts were immobilized onto the surface of fibrous activated carbon (ACF) via a sol-gel process. As an adsorbent and photocatalyst, FeO-TiO₂ on immobilized ACFs (FeO-TiO₂/ACF) greatly improved the photocatalysis rate of hydrogen production as compared with pure TiO₂ and ACF-TiO₂ under UV irradiation and visible light. The addition of ACFs surface significantly reduced the photogenerated pairs of electrons-hole recombination, thereby promoting the photocatalysis action of doped photo-metal oxides of FeO-TiO₂. Co-doping of FeO onto the lattice of the TiO₂ approach can improve the absorption activity of visible light through photo-metal oxide of TiO₂ and further enhance hydrogen production under visible light. The photocatalytic fabrics (FeO-TiO₂/ACF) were effortlessly split out from the experimental solution for re-utilization and exhibited high stability even after five complete regeneration cycles.     

智能动态网络资源分配系统

通过对解决GSM移动通信网络热点区域话务拥塞问题的研究，提出了利用可控功分器实现智能动态网络资源的分配，解决不同种类的话务拥塞问题，并着重讨论了该系统目前的成功运用及前景。     

SQL的现状及其研究与发展

一、SQL简介 如果说七十年代关系数据库还处于研制实验阶段,那么到了八十年代大量关系数据库商用产品的面市几乎占据了整个数据库市场,其中的原因在于它们使用了统一的语言界面,那就是,SQL成为了关系数据库的通用语言。 1974年．IBM公司San Jose研究实验室的D．D．Chamberlin在开发SEQUEL-XRM原型时提出了SE-QUEL(Structured English Query Language),1976年又修改成为SEQUEL／2．也就是目前的SQL(StructuredQuer Language)。SEQUEL／2主要成形于IBM的Sys-tem R原型中[2],并在原有基础上大加扩展,其后逐渐完善并最终成为一种完备的结构化数据库查询语言。     

Iodo-2'-deoxyuridine (IUdR) and 125IUdR loaded biodegradable microspheres for controlled delivery to the brain

The aim of this work was to develop sustained local release systems for radioiodinated iodo-2'-deoxyuridine (125IUdR) from biodegradable polymeric microspheres to facilitate the controlled delivery of 125IUdR to brain tumours. The selective uptake of IUdR into the cell nucleus results in cell disruption over the short range of the low energy Auger electrons. The biodegradable microspheres can be precisely implanted in the brain by stereotactic techniques and the IUdR within the microspheres is protected from degradation and thus a sustained source of radiolabelled IUdR is available in the vicinity of the residual tumour cells. Poly(lactic-co-glycolic acid), PLGA (85:15), microspheres containing cold IUdR and the Auger-electron emitter 125I, as 125IUdR were prepared using the O/W, O/O and W/O/W emulsion-solvent evaporation methods. The W/O/W emulsion method was most effective in achieving good drug loading with the use of bovine plasma in the internal water phase. Also effective in improving the drug loading was the use of 20% acetone in the dichloromethane and the presence of Span 40 in the organic phase. Electrolytes (NaCl and IUdR) in the external aqueous phase also improved drug loading. After an initial rapid release from the microspheres, a sustained release was observed over 15 days for the 'cold' IUdR. The sustained release portions of the release curves showed Higuchi (t1/2), diffusion controlled release kinetics. The radiolabelled IUdR microspheres showed a burst release effect of 30-40% followed by a sustained release over 35 days.     

中国珠宝销售的可持续发展

通过对改革开放20多年来中国珠宝业发展的回顾与分析, 认为在激烈的市场竞争中, 珠宝业要达到可持续发展必须具备6个要素: (1)敬业精神; (2)信用意识; (3)创新意识和创新能力; (4)激励机制和团队精神; (5)资本营运和资源整合能力; (6)关系营销技巧.     

Role of hepatic resection in surgery for bilateral intrahepatic stones

The effect of phenylephrine-induced reflex parasympathetic stimulation on QT interval and its dispersion was studied in 16 healthy subjects with a history of paroxysmal supraventricular tachycardia, both during sinus rhythm and during atrial pacing. Results demonstrate that rapid reflex parasympathetic stimulation does not influence QT interval duration or QT dispersion, and also emphasize the inappropriateness of Bazett's formula, the need for comparison of QT intervals during identical heart rates, and the importance of analyzing all 12 leads of a standard electrocardiogram when assessing the effects of various interventions on the QT interval.     

The lack of long-term detrimental effects on liver allografts caused by donor-specific anti-HLA antibodies

Recent reports indicate a higher incidence of both acute and chronic liver allograft rejection when, at the time of transplantation, the recipients serum contains donor-specific anti-HLA antibodies. From 9/89 to 5/91, 133 liver allografts were performed at our institution. Thirteen liver recipients had donor-specific IgG anti-HLA antibodies (complement-fixing) at the time of transplantation. In eleven patients, antibodies reacted to donor class I antigens while in 1 patient the donor-specific antibody had class II reactivity. Twelve patients have been followed for a minimum of 12 months (median 18 months, range 28-12 months). No hyperacute rejection was seen in any of the cases and four patients had acute rejections. Thus far only one of the twelve patients has biopsy evidence suggestive of chronic liver injury. The remaining have normal liver enzymes and bilirubin. Three of these twelve patients died (one from a myocardial infarction and the others from sepsis) accounting for a one-year graft survival of 75%. There was no significant statistical difference in the one-year graft survival in those recipients without donor-specific antibodies (i.e., 80.5%). In eight of the twelve patients, pretransplant preformed antibody level (PRA) was > 50%. In six of the thirteen patients donor-specific antibody was present at dilutions greater than 1:64. As previously reported, the donor-specific antibody disappeared from the serum posttransplant within hours and did not reappear. In vitro studies demonstrated no factor in portal or hepatic artery blood that could inhibit rabbit complement mediated lysis of anti-HLA antibodies. We conclude that it is not a contraindication to do liver transplants in the presence of donor-specific anti-HLA antibodies.     

Abrasive wear of dental composite resins

Abrasive wear is a major problem in the application of dental composite resins. In this study the friction and wear behaviours of two types of dental composites: one containing relatively coarse filler particles and some microfillers (Estilux) and another containing only microfiller particles (Durafill), have been investigated by using a scratch testing machine. Experimental results show that the coefficients of friction in both composites are essentially constant for applied loads up to 20 N. The wear resistance of Durafill is better than Estilux. Under the same testing conditions, the size, shape and distribution of the filler particles are more important variables than applied load and sliding speed in controlling the wear mechanism. It is shown that for Estilux, plastic ploughing by the diamond indenter is the predominant mechanism. For Durafill, however, the formation and propagation of tensile cracks on the worn surface is the main wear mechanism. The effects of two different indenters, diamond and enamel, on the basic wear mechanisms are also discussed.     

In situ SEM studies on the effects of particulate reinforcement on fatigue crack growth mechanism of aluminium-based metal-matrix composite

The effects of particulate reinforcement on the fatigue behaviour and fatigue mechanisms of two 6061 aluminium-based metal-matrix composites (MMCs) in three different heattreatment conditions were studied in situ with a scanning electron microscope and compared to the unreinforced alloy in the as-received condition. It was observed that the fatigue properties of the MMCs were influenced by the ceramic particles in two ways: firstly the particles increased the fatigue stress intensity threshold mainly by crack-deflection and crack-closure mechanisms, and secondly, the particles raised the fatigue crack growth rates in the Paris region by providing an easy crack path. The effect of ageing was small on the fatigue stress intensity threshold of MMCs, but for the peak-aged MMCs the fatigue crack growth rates in the Paris region were faster. The mechanism of fatigue crack growth was largely associated with the matrix/particle interface and the linkage with subcracks initiated ahead of the main crack at high applied stress intensity factors.