Alumina-supported catalysts for propane oxidative dehydrogenation from mixed VXM(6−X)O19 (M=W, Mo) hexametalate precursors

γ-Al₂O₃ supported vanadium oxides were modified by tungsten and molybdenum oxides in order to improve dispersion and selectivity towards olefins in propane oxidative dehydrogenation (ODH). Both vanadium–tungsten and vanadium–molybdenum catalysts were obtained by adsorption of mixed isopolyanions (VW₅O₁₉⁵⁻, V₂W₄O₁₉⁴⁻, VMo₅O₁₉⁵⁻ and V₂Mo₄O₁₉⁴⁻) from aqueous solutions. The isopolyanion solutions were characterized by UV-Vis and ⁵¹V NMR spectroscopy. Vanadium, vanadium–tungsten and vanadium–molybdenum precursors and catalysts were also characterized by UV-Vis (diffuse reflectance) and solid state ⁵¹V NMR spectroscopy. An improved selectivity to propene in the presence of tungsten and molybdenum in VO_x/γ-Al₂O₃ was observed and attributed to dilution of vanadium by tungsten or molybdenum oxides on the γ-Al₂O₃ surface.     

Homogeneity characterisation of sintered (U,Gd)O2 pellets by X-ray diffraction

(U,Gd)O₂ sintered pellets are fabricated by different methods. The homogeneity characterisation of the Gd content seems to be necessary for a production control to qualify the process and the final product obtained. In this paper, we propose an analysis of the X-ray diffraction powder patterns through the Rietveld method, in which the differences between the experimental and the calculated data proposed from a crystalline structure model are evaluated. This result allows us to determine the cell parameters, that can be correlated with the Gd concentration, and the existence of other phases with different Gd contents.     

All-optical phase-independent logic elements based on phase shiftinduced by coherent soliton collisions

We demonstrate, for the first time to our knowledge, that a fast coherent collision between two Kerr spatial solitons can give rise to a significant phase shift for both interacting beams. The maximal collision-induced phase shift ≈π rad takes place when the amplitudes of the solitons are equal (η₁=η₂) and the length of the interaction zone is comparable with a soliton phase period. Depending on the ratio η₂/η₁, and the collision angle between the solitons, the magnitude of the phase shift can be varied within a reasonable range, for example from 180° to 40°. The analysis of the effect performed by the finite-difference beam-propagation method has shown that it is insensitive to the initial phase difference between the incident beams (δ_i), even in the case when η ₁≠η₂. It has been demonstrated that the phenomenon can be used for all-optical three-soliton logic elements, which are capable of providing more than 3-dB signal amplification and possess bi -independent output characteristics     

Neural components of social evaluation.

Evaluative responses appear to involve 2 seemingly distinct sets of processes: those that are automatically activated and others that are more consciously controlled. Using functional magnetic resonance imaging, the authors investigated the brain systems associated with automatic and controlled evaluative processing. Participants made either evaluative (good-bad) or nonevaluative (past-present) judgments about famous names. Greater amygdala activity was observed for names rated as "bad" relative to those rated as "good," regardless of whether the task directly involved an evaluative judgment (good-bad) or not (past-present). Good-bad judgments resulted in greater medial and ventrolateral prefrontal cortex (PFC) activity than past-present judgments. Furthermore, there was greater ventrolateral PFC activity in good-bad judgments marked by greater ambivalence. Together, these findings indicate a neural distinction between processes engaged for automatic and controlled evaluation. Whereas automatic processes are sensitive to simple valence, controlled processes are sensitive to attitudinal complexity. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Antecedents and outcomes of work-family conflict: Testing a model of the work-family interface.

A comprehensive model of the work–family interface was developed and tested. The proposed model extended prior research by explicitly distinguishing between work interfering with family and family interfering with work. This distinction allowed testing of hypotheses concerning the unique antecedents and outcomes of both forms of work–family conflict and a reciprocal relationship between them. The influence of gender, race, and job type on the generalizability of the model was also examined. Data were obtained through household interviews with a random sample of 631 individuals. The model was tested with structural equation modeling techniques. Results were strongly supportive. In addition, although the model was invariant across gender and race, there were differences across blue- and white-collar workers. Implications for future research on the work–family interface are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Efficient Er:YAG laser operating at 1645 and 1617 nm

A 1534-nm fiber laser pumped Er:YAG laser action at room temperature has been demonstrated with high efficiency at two emission wavelengths: 1645 and 1617 nm. Multiwatt continuous-wave power was demonstrated at both wavelengths and active electrooptic Q-switch operation with >90% Q-switch efficiency was achieved at 1645 nm. Etalon tuned wavelength selection showed excellent agreement with theoretical analysis.     

Report on the therapeutic use of rimantadine and amantadine]

A discussion is carried out about the experiences with the application of rimantadine and amantadine to patients with influenza. The basic general results consisted in the fact that 2 of the 74 patients treated had a high cure percent (> 68.0%) within the first 72 hours after using the drug. No new diseased were found among the 40 contacts to whom chemoprophylaxis was applied. There were only 3.9% adverse reactions among the total number of people treated with amantadine.     

Polyamide-6/vegetal fiber composite prepared by extrusion and injection molding

The interest for the use of vegetal fibers as polymers reinforcement has recently increased because of their unique environmental and technological advantages. This work evaluated the use of Curauá fibers in polyamide-6 composites aiming at glass fiber replacement. Fiber content of 20, 30 or 40 wt% and fiber lengths of 0.1 or 10 mm were studied. Fibers were treated with N₂ plasma or washed with NaOH solution, to improve their adhesion to PA-6. Samples with 20 wt% of short or long fibers, with or without pre-treatment, were compounded in two different co-rotating intermeshing twin-screw extruders. These samples were submitted to mechanical and thermal tests. In conclusion, non-dried raw materials improved fiber/matrix interfacial adhesion. Tensile and flexural properties of this composite are better than unfilled, but lower than glass fiber reinforced polyamide-6. However, its impact resistance and heat deflection temperature are similar to the glass fiber reinforced polyamide-6 and its lower density, enable it to replace this latter in specific non-critical applications.     

Solar duct for lighting and ventilation Santa Amalia building Barcelona -Spain

The Santa Amalia building in Barcelona is a block of six flats incorporating a duct by which ligth is sent to the kitchens - previously without natural ligthing- and also allows natural ventilation. Moreover, the passive solar gains obtained from the extensive glazed surfaces and the conservation of internal heat gains, along with a high degree of isulation, give energy saving of 68% for heating.     

Three cases of tuberculosis after heart transplantation in Spain

The fibrinolytic capacity of patients with acute myocardial infarction (AMI) is known to be impaired. The primary regulatory element of the fibrinolytic system is plasminogen activator inhibitor (PAI). It has been previously observed that there are 2 peaks in the plasma PAI level of AMI patients at 4h and 16h after thrombolytic therapy with recombinant tissue plasminogen activator (rtPA). Lanoteplase/SUN9216 is a mutant tPA with a biological half-life longer than that of rtPA. Thrombolytic therapy with mutant tPA or rtPA was carried out consecutively in 21 patients with AMI (8 patients as the mutant tPA group, and 13 patients as the rtPA group). The recanalization time of the mutant tPA group was significantly faster than that of the rtPA group (16.1 +/- 3.9 min vs 39.6 +/- 4.8 min, p<0.01). The PAI activity at 4h after the initiation of thrombolysis was significantly lower in the mutant tPA group than in the rtPA group (8.74 +/- 5.46IU/L vs 26.74 +/- 3.35 IU/L, p<0.01). There was a one mild peak in serial plasma PAI activity levels 24h after the initiation of thrombolysis. The results suggest that thrombolytic therapy with mutant tPA reduced the impairment of fibrinolytic capacity. The mutant tPA gives faster recanalization and lower PAI activity after successful thrombolysis, compared with rtPA.