反转构造的反转程度及其与油气聚集的关系

结合典型反转构造地震剖面，分析了断层型和褶皱型两类反转构造的反转程度，上下皆正断层型和向形褶皱型反转构造的反转程度轻微；上逆下正断层型和透镜形褶皱型反转构造的反转程度中等；上下皆逆断层型和背形褶皱型反转构造的反转程度强烈。分析了反转构造的反转程度与油气聚集的关系，处于轻微反转程度的上下皆正断层型反转和向形褶皱型反转，以及处于强烈反转程度的上下皆逆断层型反转和背形褶皱型反转不利于油气聚集；处于中等反转程度的上逆下正断层型反转和透镜形褶皱型反转类型有利于油气聚集成藏。     

THE SIMULATION OF THE SAR IMAGE OF INTERNAL SOLITARY WAVES IN ALBORAN SEA

1 .　ＩＮＴＲＯＤＵＣＴＩＯＮＯｃｅａｎｉｎｔｅｒｎａｌｗａｖｅｉｓａｋｉｎｄｏｆｇｒａｖｉｔｙｗａｖｅｇｅｎｅｒａｔｅｄｉｎｔｈｅｓｔｒａｔｉｆｉｅｄｏｃｅａｎ .Ｉｔｐｒｏｄｕｃｅｂｙｔｈｅｉｎｔｅｒａｃｔｉｏｎｏｆｔｉｄｅｃｕｒｒｅｎｔａｎｄｔｏｐｏｇｒａｐｈｙ ,ｓｅａｑｕａｋｅａｎｄｍｏｖｉｎｇｓｈｉｐｗｈｅｎｔｈｅｓｔｒｏｎｇ ,ｓｈａｌｌｏｗｐｙｃｎｏｃｌｉｎｅｉｓ ｐｒｅｓｅｎｔ.Ｔｈｅｉｎｔｅｒｎａｌｗａｖｅｓｉｎｔｈｅｃｏｎｔｉｎｅｎｔａｌｓｈｅｌｆａｒｅａｌｍｏｓｔｔｉｄｅｐｒｏｄ…     

AN EXTENDED MODELING OF TIDE-WAVE MOTION

1 .　ＩＮＴＲＯＤＵＣＴＩＯＮＴｏｓｔｕｄｙｔｈｅｍｏｔｉｏｎｏｆｔｈｅｔｉｄｅ ｗａｖｅｓ,ｔｈｅｓｈａｌｌｏｗｗａｔｅｒｅｑｕａｔｉｏｎｓ ,ｉ.ｅ .ｔｈｅｖｅｒｔｉｃａｌｉｎｔｅｒｇｒａ ｔｉｏｎｏｆｔｈｅｃｏｎｔｉｎｕｉｔｙｅｑｕａｔｉｏｎａｎｄｍｏｍｅｎｔｕｍｅｑｕａ ｔｉｏｎ ,ｉｓｃｏｎｓｉｄｅｒｅｄａｓｔｈｅｇｏｖｅｒｎｉｎｇｅｑｕａｔｉｏｎｓ.Ｂｙａｂｏｖｅｅｑｕａｔｉｏｎｓｔｗｏｅｑｕａｔｉｏｎｓｒｅｌａｔｅｄｔｏｔｈｅｈｏｒｉｚｏｎ ｔａｌｆｌｕｘｏｆｔｈｅｔｉｄｅ ｃｕｒｒｅｎｔｓａ…     

GENERATION OF NONLINEAR INTERNAL WAVES ON CONTINENTAL SHELF

1 .　ＩＮＴＲＯＤＵＣＴＩＯＮＩｎｔｅｒｎａｌｔｉｄａｌｉｎｔｅｒａｃｔｉｏｎｗｉｔｈｂｏｔｔｏｍｆｅａｔｕｒｅｓａｐｐｅａｒｓｔｏｂｅｔｈｅｄｏｍｉｎａｎｔｍｅｃｈａｎｉｓｍｆｏｒｇｅｎｅｒａ ｔｉｏｎｏｆｔｈｅｃｏｈｅｒｅｎｔｏｃｅａｎｉｃｉｎｔｅｒｎａｌｗａｖｅｓｔｈａｔａｒｅｏｂｓｅｒｖａｂｌｅｗｉｔｈＳＡＲ ,ｃｌｏｓｅｒｔｏｓｈｏｒｅ ,ｒｉｖｅｒｉｎｅｏｒｇｌａｃｉａｌｉｎｔｒｕｓｉｏｎａｎｄｃｏｎｔｉｎｅｎｔａｌｂｒｅａｋｐｒｏｖｉｄｅｓｅｃ ｏｎｄａｒｙｇｅｎｅｒａｔｉｎｇｍｅｃｈａ…     

一种新颖的跳频振荡器

摘要本文综合考虑到频率合成技术及单端口体波谐振器HBAR的特点提出了一种基于一阶非线性PLL的锁相频率合成方案。文中对这种跳频方案的原理、性能特点作了详细论述、并通过实验、从不同角度对本方案进行了说明、同时对整机的各项指标作了详尽测试:在HBAR无载Q_N值为4000的情况下,该多模跳频振荡源的捷变范围为770MHz—840MHz、捷变时间小于20μS。杂散分量低于—60dB、二次谐波分量低于—34dB。离散捷变频率点为16点,构成闭环跳频系统后,对开环VCO的短稳改善了三个量级:从1.3×10~(-5)/ms到1.6×10~(-8)/ms及9.56×~(-7)/s到1.69×!0~(-9)/s,尤为重要的是该多模跳频振荡源达到此性能所需的硬件量很小,因此在对体积要求苛刻的场合、此种跳频方案具有极强的竞争力。     

Development of a simple model for batch and boundary information updation for a similar ship’s block model

In early 2000,large domestic shipyards introduced shipbuilding 3D computer-aided design (CAD) to the hull production design process to define manufacturing and assembly information.The production design process accounts for most of the man-hours (M/H) of the entire design process and is closely connected to yard production because designs must take into account the production schedule of the shipyard,the current state of the dock needed to mount the ship’s block,and supply information.Therefore,many shipyards are investigating the complete automation of the production design process to reduce the M/H for designers.However,these problems are still currently unresolved,and a clear direction is needed for research on the automatic design base of manufacturing rules,batches reflecting changed building specifications,batch updates of boundary information for hull members,and management of the hull model change history to automate the production design process.In this study,a process was developed to aid production design engineers in designing a new ship’s hull block model from that of a similar ship previously built,based on AVEVA Marine.An automation system that uses the similar ship’s hull block model is proposed to reduce M/H and human errors by the production design engineer.First,scheme files holding important information were constructed in a database to automatically update hull block model modifications.Second,for batch updates,the database’s table,including building specifications and the referential integrity of a relational database were compared.In particular,this study focused on reflecting the frequent modification of building specifications and regeneration of boundary information of the adjacent panel due to changes in a specific panel.Third,the rollback function is proposed in which the database (DB) is used to return to the previously designed panels.     

Preparation Polyelectrolyte Complexes of Chitosan-Polyacrylic Acid-Modified Iron Sand Leachate for Proton Exchange Membranes

ABSTRACT

Polyelectrolyte complex (PEC) of chitosan (Chi) and poly (acrylic acid) (PAA)-modified iron sand leachate were prepared and considered for applicability as a proton exchange membrane in fuel cells. Chi-PAA-hematite blended in different weight ratios and the resulting membranes were treated to enable the formation of the polyelectrolyte. The membranes of Chi-PAA polyblend were treated using iron sand leachate and reveal high ion exchange capacity (IEC), proton conductivity, water uptake, and good mechanical stability. The result of research indicated that the membrane with 40 wt% of Chi and 60 wt% of PAA blend which its conductivity of 6.10 × 10^?2 S cm^?1 was potentially for a proton exchange membrane in fuel cell applications.     

Gelatin supports with immobilized laccase as sustainable biocatalysts for water treatment

Millimeter-size beads of gelatin are manufactured by dripping process to give enzyme supports qualified for micropollutants biodegradation in alternative wastewater treatment. The bead diameter is dependent on the tip diameter, the gelatin solution viscosity and the swelling of polymer chains in the collecting bath. Chemical crosslinking was performed with glutaraldehyde using optimal concentration to give mechanical and thermal properties suitable for application in stirred reactor in aqueous medium. Laccases from Trametes versicolor are grafted on the gelatin beads with glutaraldehyde. Sixty percentage of the initial enzymatic activity, evaluated by the oxidation of 2′-Azino-bis(3-ethylbenzothiazoline-6-sulfonic acid)diammonium salt (ABTS) is maintained after 10 successive cycles of reaction. Thermal stability at 60°C of immobilized biocatalysts is improved when compared to free enzymes (45% vs 10% of relative activity after 6 h of incubation). The simplicity of the procedure to form gelatin beads and their properties make them promising bio-based and biodegradable support for enzyme immobilization.     

硫酸盐还原菌对铜镍合金腐蚀的影响

利用电化学测试技术，在实验室条件下研究了硫酸盐还原菌(SRB)对铜镍合金腐蚀行为的影响。实验结果表明，SRB的存在使电极开路电位明显负移，极化电阻在细菌生长后期迅速降低。在含SRB的溶液中，铜镍合金表面会形成由腐蚀产物和SRB等组成的混合膜，腐蚀速度受到Cu通过混合膜向电极表面扩散速度的控制。