Rate of ammonia oxidation in a synthetic saline wastewater by a nitrifying mixed‐culture

Most of the kinetic studies on nitrification have been performed in diluted salts medium. In this work, the ammonia oxidation rate (AOR) was determined by respirometry at different ammonia (0.01 and 33.5 mg N‐NH₃ L^?1), nitrite (0–450 mg N‐NO₂^? L^?1) and nitrate (0 and 275 mg N‐NO₃^? L^?1) concentrations in a saline medium at 30 °C and pH 7.5. Sodium azide was used to uncouple the ammonia and nitrite oxidation, so as to measure independently the AOR. It was determined that ammonia causes substrate inhibition and that nitrite and nitrate exhibit product inhibition upon the AOR. The effects of ammonia, nitrite and nitrate were represented by the Andrews equation (maximal ammonia oxidation rate, r_AOMAX, = 43.2 [mg N‐NH₃ (g VSS_AO h)^?1]; half saturation constant, K_SAO, = 0.11 mg N‐NH₃ L^?1; inhibition constant K_IAO, = 7.65 mg N‐NH₃ L^?1), by the non‐competitive inhibition model (inhibition constant, K_INI, = 176 mg N‐NO₂^? L^?1) and by the partially competitive inhibition model (inhibition constant, K_INA, = 3.3 mg N‐NO₃^? L^?1; α factor = 0.24), respectively. The r_AOMAX value is smaller, and the K_SAO value larger, than the values reported in diluted salts medium; the K_IAO value is comparable to those reported. Process simulations with the kinetic model in batch nitrifying reactors showed that the inhibitory effects of nitrite and nitrate are significant for initial ammonia concentrations larger than 100 mg N‐NH₄⁺ L^?1. Copyright © 2005 Society of Chemical Industry     

Watermarking for intellectual property protection

A new watermarking method for intellectual property (IP) protection is presented. The proposed method uses a uniquely generated stream of bits, known as a watermark, embedded into the self-test circuit to represent ownership. This scheme can detect the ownership rights of the IP provider even when the chip has been packaged. Experimental results show the proposed embedding technique can survive synthesis, placement and routing. The experimental results are given to demonstrate the proposed method.     

FM subcarrier fiber optical transmission system design and itsapplication in next-generation wireless access

This paper presents a design method of optical frequency modulation (FM) subcarrier (with super carrier) transmission modem. The nonideal link characteristics, including laser chirping, fiber dispersion, voltage controlled oscillator (VCO) phase noise, relative intensity noise (RIN), and equivalent network model of laser diode of such a system that may bring about signal distortion are discussed first. We then propose a hierarchical methods to establish the system equivalent model. Finally this FM modem is applied to a GSM wireless system, in which multichannel signals are transmitted over fiber between radio port and basestation, and system performance is appraised by its dynamic range. It is found that optical FM subcarrier (with super carrier) transmission technique can improve the system dynamic range, compared with the intensity modulated direct detection (IMDD) method, and this is a economical and efficient method     

Hypocalcemic-induced tetany that causes triceps and bilateral quadriceps tendon ruptures

Small-cell carcinoma (also known as oat-cell carcinoma) is a rare tumor that previously concerns the lung; small-cell carcinoma of the bladder is extremely rare (0.5% of all bladder malignancies). The Authors report here the case of a 78th years old man. Fourteen months before our observation he was submitted to a partial cystectomy for a small-cell carcinoma of the bladder cupola. There was no evidence of extra-vesical location at that moment and the patient was not submitted to any adjuvant therapy. At the moment of our observation the disease was very advanced and the patient died in a few time. The Authors discuss about the therapy of bladder small-cell carcinoma in the few cases described by the literature and about the survival of those patients. A radical surgical treatment in association with an adjuvant chemo- or radiotherapy appears as a better way to treat these patients. On account of this case the Authors agree with this choice and conclude that only a combined treatment can allow a better survival.     

Delta opioid peptide [D-Ala2,D-leu5]enkephalin blocks the long-term loss of dopamine transporters induced by multiple administrations of methamphetamine: involvement of opioid receptors and reactive oxygen species

Delta opioid peptide [D-Ala2,D-leu5]enkephalin (DADLE) can prolong organ preservation and increases myocardial tolerance to ischemia. Our study examined the protective property of DADLE against methamphetamine- (METH) induced dopaminergic terminal damage in the central nervous system. Because the neurotoxicity of METH involves reactive oxygen species, we also examined if DADLE might be an antioxidative agent in vitro. DADLE at 2 and 4 mg/kg (i.p.), given 30 min before each METH administration (5 or 10 mg/kg, i.p., four injections in a day at 2-hr intervals), dose-dependently blocked the METH-induced long-term dopamine transporter loss. The opioid antagonist naltrexone blocked this action of DADLE in both aspects of striata but tends not to affect the effects of DADLE in the nucleus accumbens. DADLE did not alter changes in body temperature induced by METH. The reduction of striatal dopaminergic content and tyrosine hydroxylase activity caused by METH, however, were not blocked by DADLE. In vitro, DADLE was approximately equipotent to glutathione in inhibiting both superoxide anion formation induced by xanthine oxidase and hydroxyl radical formation evoked by ferrous/citrate complex. DADLE was only slightly less potent than glutathione in inhibiting the iron/ascorbate-induced brain lipid peroxidation. These results suggest that DADLE can protect the terminal membranes of dopaminergic neurons against METH-induced insult but not the loss of dopaminergic content and tyrosine hydroxylase activity and that this action of DADLE might involve opioid receptors as well as the sequestration of free radical.     

Investigation of fusion reactions in palladium and titanium tritide using galvanostatic,coulometric, and hydrogen permeation techniques

We describe several electrochemical methods used to investigate the possibility of cold fusion phenomena in palladium and titanium tritide cathodes. We performed long-term (up to 77 days) electrolysis experiments with electrochemical cells of the University of Utah type at current densities as high as 1 A/cm², while monitoring neutron and tritium levels. With some cells, we pulsed the current to determine if neutron bursts would result. In another cell, we used titanium tritide as the cathode to determine if D-T reactions yielding neutrons would occur. In no instance were levels of neutrons or tritium significantly above background except in the titanium tritide cell where isotopic exchange, occcurring between the electrode and the electrolyte, resulted in significant tritium levels. We also combined x-ray photoelectron spectroscopy (XPS) and electrochemical hydrogen permeation experiments to determine the effectiveness of various Pd surface treatment procedures on the resultant electrochemical hydrogen absorption efficiency. Electroanalytical and thermal desorption/gas analysis techniques indicated the maximum loading of H in Pd was to a ratio of HPd=0.8.     

A comparison of neutron-induced SEU rates in Si and GaAs devices

The single-event-upset rates due to neutron-induced nuclear recoils have been calculated for Si and GaAs components using the HETC and MCNP codes and the ENDF data base for (n, p) and (n, alpha) reactions. For the same critical charge and sensitive volume, the upset rate in Si exceeds that of GaAs by a factor of about 1.7, mainly because more energy is transferred in neutron interactions with lighter Si nuclei. The upset rates due to neutrons are presented as functions of critical charge and atmospheric altitude. Upsets induced by cosmic-ray nuclei, secondary protons and neutrons are compared.     

EXPERIMENTAL STUDY ON MIXING: POWER CONSUMPTION AND DEGREE OF SUSPENSION

An experimental study on mixing, degree of suspension and power consumption in solid-liquid suspensions was done. A system similar to those found in anaerobic fermentation processes of animal manures was used, and an existing mixing equipment was adapted for the study. Power consumption and degree of suspension for both mechanical mixing and mixing by gas was determined. The influence of variables such as geometry, solids concentration, stirrer velocity, and gas velocity was studied, discussed, and compared to data from the literature. Best results were obtained for gas mixing, the power consumption being about one fourth of that required by mechanical agitation. Finally, extended correlations relating Power and Reynolds numbers for mechanical mixing and mixing by gas are proposed.