Efficiency of removal of whey protein from sweet whey using polymeric microfiltration membranes

Our objective was to measure whey protein removal percentage from separated sweet whey using spiral-wound (SW) polymeric microfiltration (MF) membranes using a 3-stage, 3× process at 50°C and to compare the performance of polymeric membranes with ceramic membranes. Pasteurized, separated Cheddar cheese whey (1,080 kg) was microfiltered using a polymeric 0.3-μm polyvinylidene (PVDF) fluoride SW membrane and a 3×, 3-stage MF process. Cheese making and whey processing were replicated 3 times. There was no detectable level of lactoferrin and no intact α- or β-casein detected in the MF permeate from the 0.3-μm SW PVDF membranes used in this study. We found BSA and IgG in both the retentate and permeate. The β-lactoglobulin (β-LG) and α-lactalbumin (α-LA) partitioned between retentate and permeate, but β-LG passage through the membrane was retarded more than α-LA because the ratio of β-LG to α-LA was higher in the MF retentate than either in the sweet whey feed or the MF permeate. About 69% of the crude protein present in the pasteurized separated sweet whey was removed using a 3×, 3-stage, 0.3-μm SW PVDF MF process at 50°C compared with 0.1-μm ceramic graded permeability MF that removed about 85% of crude protein from sweet whey. The polymeric SW membranes used in this study achieve approximately 20% lower yield of whey protein isolate (WPI) and a 50% higher yield of whey protein phospholipid concentrate (WPPC) under the same MF processing conditions as ceramic MF membranes used in the comparison study. Total gross revenue from the sale of WPI plus WPPC produced with polymeric versus ceramic membranes is influenced by both the absolute market price for each product and the ratio of market price of these 2 products. The combination of the market price of WPPC versus WPI and the influence of difference in yield of WPPC and WPI produced with polymeric versus ceramic membranes yielded a price ratio of WPPC versus WPI of 0.556 as the cross over point that determined which membrane type achieves higher total gross revenue return from production of these 2 products from separated sweet whey. A complete economic engineering study comparison of the WPI and WPPC manufacturing costs for polymeric versus ceramic MF membranes is needed to determine the effect of membrane material selection on long-term processing costs, which will affect net revenue and profit when the same quantity of sweet whey is processed under various market price conditions.     

Modulation of Innate Immune Toxicity by Silver Nanoparticle Exposure and the Preventive Effects of Pterostilbene

Silver nanoparticles pose a potential risk to ecosystems and living organisms due to their widespread use in various fields and subsequent gradual release into the environment. Only a few studies have investigated the effects of silver nanoparticles (AgNPs) toxicity on immunological functions. Furthermore, these toxic effects have not been fully explored. Recent studies have indicated that zebrafish are considered a good alternative model for testing toxicity and for evaluating immunological toxicity. Therefore, the purpose of this study was to investigate the toxicity effects of AgNPs on innate immunity using a zebrafish model and to investigate whether the natural compound pterostilbene (PTE) could provide protection against AgNPs-induced immunotoxicity. Wild type and neutrophil- and macrophage-transgenic zebrafish lines were used in the experiments. The results indicated that the exposure to AgNPs induced toxic effects including death, malformation and the innate immune toxicity of zebrafish. In addition, AgNPs affect the number and function of neutrophils and macrophages. The expression of immune-related cytokines and chemokines was also affected. Notably, the addition of PTE could activate immune cells and promote their accumulation in injured areas in zebrafish, thereby reducing the damage caused by AgNPs. In conclusion, AgNPs may induce innate immune toxicity and PTE could ameliorate this toxicity.     

Measurement of casein in milk by Kjeldahl and sodium dodecyl sulfate–polyacrylamide gel electrophoresis

Our objectives were to determine if milk casein as a percentage of true protein (CN%TP) estimated by sodium dodecyl sulfate–polyacrylamide gel electrophoresis (SDS-PAGE) is equivalent to CN%TP estimated by Kjeldahl, and to determine the proportion of casein (CN), casein proteolysis products (CNPP), and serum protein (SP) from milk true protein (TP) that goes into the Kjeldahl noncasein nitrogen (NCN) filtrate and the proportion that stays in the NCN precipitate using SDS-PAGE. Raw milk samples were collected from 16 mid-lactation Holstein cows twice a week for 2 wk. These milks were analyzed for Kjeldahl total nitrogen, nonprotein nitrogen, and NCN content in duplicate, and by SDS-PAGE. The CN%TP determined by Kjeldahl was compared with the CN%TP estimated by SDS-PAGE calculated in 2 ways: as a percentage of only intact caseins divided by TP and as a percentage of both intact caseins and CNPP divided by TP. Three milks varying in fat, lactose, TP, CN, and SP content were formulated. These milks were analyzed in duplicate for Kjeldahl total nitrogen, nonprotein nitrogen, and NCN content, and each of the NCN filtrate and NCN precipitate were analyzed in duplicate by SDS-PAGE for relative quantity (%) of CN, CNPP, and SP. We found that the estimate of CN%TP by Kjeldahl was higher than the estimate of CN%TP by SDS-PAGE that was calculated as only intact CN divided by the total of all protein bands. However, no difference was detected in the estimate of CN%TP by Kjeldahl compared with CN%TP by SDS-PAGE when CNPP were included as CN in the calculation of SDS-PAGE results. Based on SDS-PAGE results, we found that a majority (89%) of the CNPP from the milk (approximately 10.13 out of 11.41% TP) were retained in the Kjeldahl NCN precipitate. Thus, CN%TP measured by Kjeldahl underestimates the amount of proteolytic damage that has been done to CN in milk. It is important for the dairy industry to correctly and rapidly measure the extent of proteolytic damage to milk protein to correctly value milk from a product quality and yield point of view. A rapid and quantitative measure of proteolytic damage to milk protein is needed.     

Determination of the efficiency of removal of whey protein from sweet whey with ceramic microfiltration membranes

Our research objective was to measure percent removal of whey protein from separated sweet whey using 0.1-µm uniform transmembrane pressure ceramic microfiltration (MF) membranes in a sequential batch 3-stage, 3× process at 50°C. Cheddar cheese whey was centrifugally separated to remove fat at 72°C and pasteurized (72°C for 15 s), cooled to 4°C, and held overnight. Separated whey (375 kg) was heated to 50°C with a plate heat exchanger and microfiltered using a pilot-scale ceramic 0.1-µm uniform transmembrane pressure MF system in bleed-and-feed mode at 50°C in a sequential batch 3-stage (2 diafiltration stages) process to produce a 3× MF retentate and MF permeate. Feed, retentate, and permeate samples were analyzed for total nitrogen, noncasein nitrogen, and nonprotein nitrogen using the Kjeldahl method. Sodium dodecyl sulfate-PAGE analysis was also performed on the whey feeds, retentates, and permeates from each stage. A flux of 54 kg/m² per hour was achieved with 0.1-µm ceramic uniform transmembrane pressure microfiltration membranes at 50°C. About 85% of the total nitrogen in the whey feed passed though the membrane into the permeate. No passage of lactoferrin from the sweet whey feed of the MF into the MF permeate was detected. There was some passage of IgG, bovine serum albumen, glycomacropeptide, and casein proteolysis products into the permeate. β-Lactoglobulin was in higher concentration in the retentate than the permeate, indicating that it was partially blocked from passage through the ceramic MF membrane.     

Influence of glycerol and water activity on the properties of compressed egg white-based bioplastics

In this paper, the effects of glycerol (35%, 40% and 45%) and water activity (0.34 and 0.48) on the physical, mechanical and morphological properties of compressed egg white-based bioplastics are investigated. Lighter, more reddish and less yellowish sheets with a decreased thickness and second-order transition temperature, improved mechanical properties (increased flexibility and decreased rigidity and stiffness) and constant moisture content can be obtained by increasing water activity. Increasing the GLY content results in the same type of changes but to a lesser extent and increased moisture content. Increasing both, water activity and GLY, leads to a more pronounced effect for some properties. This study demonstrates that compressed egg white-based bioplastics with desired properties can be obtained by adjusting water activity and GLY content during their synthesis.