Most of the commonly used hydrological models do not account for the actual evapotranspiration (ETa) as a key contributor to water loss in semi-arid/arid regions. In this study, the HEC-HMS (Hydrologic Engineering Center Hydrologic Modeling System) model was calibrated, modified, and its performance in simulating runoff resulting from short-duration rainfall events was evaluated. The model modifications included integrating spatially distributed ETa, calculated using the surface energy balance system (SEBS), into the model. Evaluating the model’s performance in simulating runoff showed that the default HEC-HMS model underestimated the runoff with root mean squared error (RMSE) of 0.14 m3/s (R2?=?0.92) while incorporating SEBS ETa into the model reduced RMSE to 0.01 m3/s (R2?=?0.99). The integration of HECHMS and SEBS resulted in smaller and more realistic latent heat flux estimates translated into a lower water loss rate and a higher magnitude of runoff simulated by the HECHMS model. The difference between runoff simulations using the default and modified model translated into an average of 95,000 m3 runoff per rainfall event (equal to seasonal water requirement of ten-hectare winter wheat) that could be planned and triggered for agricultural purposes, flood harvesting, and groundwater recharge in the region. The effect of ETa on the simulated runoff volume is expected to be more pronounced during high evaporative demand periods, longer rainfall events, and larger catchments. The outcome of this study signifies the importance of implementing accurate estimates of evapotranspiration into a hydrological model.
The Journal of Supercomputing - Agile software development (ASD) and software product line (SPL) have shown significant benefits for software engineering processes and practices. Although both... 相似文献
The three-component reaction between amine, carbonyl compound and thioglycolic acid is now considered as a major strategy for synthesis of 1,3-thiazolidin-4-ones, which consists of the following steps: (i) condensation of aldehyde and amine which results the formation of an imine; (ii) the reaction between thioglycolic acid and the imine which is followed by an intramolecular cyclization reaction, which leads to the formation of the final product. In this way, if no suitable catalyst is employed, the completion of the reaction will not be achieved. Hence, it is of great importance to select an appropriate catalyst so that these compounds can be successfully synthesized. Herein, we employed LDHs@PpPDA as a versatile catalyst for the fabrication of novel derivatives of 1,3-thiazolidin-4-one. 相似文献
With the high availability of digital video contents on the internet, users need more assistance to access digital videos. Various researches have been done about video summarization and semantic video analysis to help to satisfy these needs. These works are developing condensed versions of a full length video stream through the identification of the most important and pertinent content within the stream. Most of the existing works in these areas are mainly focused on event mining. Event mining from video streams improves the accessibility and reusability of large media collections, and it has been an active area of research with notable recent progress. Event mining includes a wide range of multimedia domains such as surveillance, meetings, broadcast, news, sports, documentary, and films, as well as personal and online media collections. Due to the variety and plenty of Event mining techniques, in this paper we suggest an analytical framework to classify event mining techniques and to evaluate them based on important functional measures. This framework could lead to empirical and technical comparison of event mining methods and development of more efficient structures at future. 相似文献
Multimedia Tools and Applications - In this paper, a novel chaos-based dynamic encryption scheme with a permutation-substitution structure is presented. The S-boxes and P-boxes of the scheme are... 相似文献
The effects of gum tragacanth obtained from two species of Astragalus Gossypinus (GT-G) and A. Parrowianus (GT-P) at two levels of 10% and 30% combined with cellulose nanofibers (CNF; 5%) on the physico-mechanical and structural properties of polyvinyl alcohol (PVA) nanocomposite film were investigated in this study. The water solubility and water vapor permeability of the films decreased with increasing the content of both gums, especially in the film containing 30% GT-P. The highest values of the tensile strength (39.3 MPa) and elongation at break (445%) belonged to the treatment containing 10% GT-P (90/10P/0). The FTIR and DSC analyses confirmed good interactions between GT and PVA in the 90/10P/0 treatment. SEM images indicated the dense structure of this film as the optimum treatment. Although the presence of CNF in the films containing GT-G improved some properties, especially the Young modulus, it impaired all the functional properties of nanocomposite GT-P film. 相似文献
In this paper, metamodeling and five well-known metaheuristic optimization algorithms were used to reduce the weight and improve crash and NVH attributes of a vehicle simultaneously. A high-fidelity full vehicle model is used to analyze peak acceleration, intrusion and component’s internal-energy under Full-Frontal, Offset-Frontal, and Side crash scenarios as well as vehicle natural frequencies. The radial basis functions method is used to approximate the structural responses. A nonlinear surrogate-based mass minimization was formulated and solved by five different optimization algorithms under crash-vibration constraints. The performance of these algorithms is investigated and discussed. 相似文献
Discrete linear quadratic control has been efciently applied to linear systems as an optimal control.However,a robotic system is highly nonlinear,heavily coupled and uncertain.To overcome the problem,the robotic system can be modeled as a linear discrete-time time-varying system in performing repetitive tasks.This modeling motivates us to develop an optimal repetitive control.The contribution of this paper is twofold.For the frst time,it presents discrete linear quadratic repetitive control for electrically driven robots using the mentioned model.The proposed control approach is based on the voltage control strategy.Second,uncertainty is efectively compensated by employing a robust time-delay controller.The uncertainty can include parametric uncertainty,unmodeled dynamics and external disturbances.To highlight its ability in overcoming the uncertainty,the dynamic equation of an articulated robot is introduced and used for the simulation,modeling and control purposes.Stability analysis verifes the proposed control approach and simulation results show its efectiveness. 相似文献
In this research, we work with data of futures contracts on foreign exchange rates for British pound (BP), Canadian dollar
(CD), and Japanese yen (JY) that are traded at the Chicago Mercantile Exchange (CME) against US dollars. We model relationships
between exchange rates in these currencies using linear models, feed forward artificial neural networks (ANN), and three versions
of recurrent neural networks (RNN1, RNN2 and RNN3) for predicting exchange rates in these currencies against the US dollar.
Our results on forecast evaluations based on AGS test the tests of forecast equivalence between any two competing models among
the entire models employed for each of the series show that ANN and the three versions of RNN models offer superior forecasts
for predicting BP, CD and JY exchange rates although the forecast evaluations based on MGN test are in sharp contrast. On
the other hand forecast based on SIGN test shows that ANN and all the versions of RNN models offer superior forecasts for
BP and CD in exception of JY exchange rates. The results for forecast evaluation for all the models for each of the series
based on summary measures of forecast evaluations show that RNN3 model appears to offer the most accurate predictions of BP
and RNN1 for JP exchange rates. However, none of the RNN models appear to be statistically superior to the benchmark (i.e.,
linear model) for predicting CD exchange rates.
相似文献
Hierarchically structured materials comprising rod‐like, chiral, nanoparticles are commonly encountered in nature as they can form assemblies with exceptional optical and mechanical characteristics. These include cellulose nanocrystals (CNCs), which have a large potential for the fabrication of bioinspired materials mimicking those advanced properties. Fine‐tuning the optomechanical properties of assemblies obtained from CNCs hinges on the transformations from suspensions of liquid crystals to long‐range order in the dry state. So far, associated transitions have been studied using trivial interfaces such as planar substrates. Such transitions are explored as they evolve onto meshed supports. The meshed substrate offers a complex topology, as is encountered in nature, for the formation of CNCs films. The CNCs self‐assembly occurs under confinement and support of the framework bounding the mesh openings. This leads to coexisting suspended and supported nanoparticle layers exhibiting nematic and/or chiral nematic order. Optical microscopy combined with crossed polarizers indicate that the formation of the suspended films occurs via intermediate gelation or kinetic arrest of CNCs across the mesh's open areas. The formation of self‐standing, ultrathin films of CNCs with tunable optical properties, such as selective reflections in the visible range (structural color), is demonstrated by using the presented simple and scalable approach. 相似文献