2.4 GHz continuously variable ferroelectric phase shifters using all-pass networks

Continuously variable ferroelectric (BST on sapphire) phase shifters based on all-pass networks are presented. An all-pass network phase shifter consists of only lumped LC elements, and thus the total size of the phase shifter is kept to less than 2.2 mm /spl times/ 2.6 mm at 2.4 GHz. The tunability (C/sub max//C/sub min/) of a BST interdigital capacitor is over 2.9 with a bias voltage of 140 V. The phase shifter provides more than 121/spl deg/ phase shift with the maximum insertion loss of 1.8 dB and the worst case return loss of 12.5 dB from 2.4 GHz to 2.5 GHz. By cascading two identical phase shifters, more than 255/spl deg/ phase shift is obtained with the maximum insertion loss of 3.75 dB. The loss figure-of-merit of both the single- and double-section phase shifters is over 65/spl deg//dB from 2.4 GHz to 2.5 GHz.     

Donor work-up and transport of bone marrow--recommendations and requirements for a standardized practice throughout the world from the Donor Registries and Quality Assurance Working Groups of the World Marrow Donor Association (WMDA)

In October 1995 the World Marrow Donor Association (WMDA) was restructured in order to facilitate its primary function of establishing guidelines in relation to international bone marrow and blood stem cell transplants -- transplants in which the donor is in one country and the patient is in another country. Five new working groups were established -- Donor Registries, Ethics, Quality Assurance, Finances, and Stem Cells. This paper, prepared by members of the Donor Registries Working Group, in consultation with the Quality Assurance Working Group, provides recommendations for the 'donor work-up'. This term covers events that start when the definitive donor has been identified, includes the harvesting (collection) and transportation of the stem cell product and ends when the product reaches the transplant centre. The paper includes examples of the documentation intended to ensure compliance with the recommendations at all key points in the sequence.     

Surface and Subsurface Cracks in Rolling Contact Fatigue of Hardened Components

The competitive aspect of surface and subsurface fatigue crack propagation in hardened components subjected to rolling contact fatigue is highlighted, the former being greatly affected by the working conditions (in particular the presence of tangential stresses and lubricant), the latter depending mainly on the inclusions content and on the hardness profile. In order to determine which one of these kinds of damage is favoured, initial data consisting of contact load, rolling and sliding speed, theological properties of the lubricant, material hardness and inclusions content are necessary.

The concurrent role of asperities and Hertzian stress field in determining surface crack propagation is explained with the approach of the “quiescent zone.” calculating the stress intensity factors range in a contact cycle and considering the pumping effect of the fluid possibly present on the contact surface.

Inherent defects (especially oxides) are thought to be responsible for subsurface cracks origin and the Murakami formula for short cracks is extrapolated to describe their growth threshold, which also depends on the hardness and therefore on the depth in surface hardened components.

A crack propagation index is then defined as a ratio of applied to threshold stress intensity factor, both for surface and subsurface cracks. Evaluating this index for a general operating condition, it is possible to determine which damage mechanism is favoured, taking into account the decisive effect of the hardness profile.     

Failure Analysis of a Cyclic Contact Testing Machine Pin

The goal of this paper is to investigate the failure of a mandrel pin mounted on a rolling contact test bench. For this purpose, different methods of analysis were conducted, including metallography and stress analysis. The stress values in the failed pin were determined by Finite Elements. The high notch effect and the incorrect mounting of the specimens were identified as the failure causes. A pin design change is proposed to reduce the maximum stress even in the case of incorrect specimen mounting.     

Cybersecurity policy verification with declarative programming

Cybersecurity is a growing concern in today’s society. Security policies have been developed to ensure that data and assets remain protected for legitimate users, but there must be a mechanism to verify that these policies can be enforced. This paper addresses the verification problem of security policies in role-based access control of enterprise software. Most existing approaches employ traditional logic or procedural programming that tends to involve complex expressions or search with backtrack. These can be time-consuming, and hard to understand, and update, especially for large-scale security verification problems. Declarative programming paradigms such as “Answer Set” programming have been widely used to alleviate these issues by ways of elegant and flexible modeling for complex search problems. However, solving problems using these paradigms can be challenging due to the nature and limitation of the declarative problem solver. This paper presents an approach to automated security policy verification using Answer Set programming. In particular, we investigate how the separation of duty security policy in role-based access control can be verified. Our contribution is a modeling approach that maps this verification problem into a graph-coloring problem to facilitate the use of generate-and-test in a declarative problem-solving paradigm. The paper describes a representation model and rules that drive the Answer Set Solver and illustrates the proposed approach to securing web application software to assist the hiring process in a company.     

Electrical impedance endo-tomography: imaging tissue from inside

This paper describes a new method for scanning the conductivity of a tissue or an organ using a multielectrode impedance probe placed at the center of the region of interest. The long-term objective of the study is the evaluation, using an urethral impedance probe, of the lesion produced by ultrasound ablathermy of localized prostate cancer. The probe consists of electrodes placed at the surface of an insulating cylinder. The injected current passes around the cylinder and spreads in the medium surrounding the probe. This paper presents the theoretical bases of this method, the calculated sensitivity distributions of electrode configurations involving a pair of diametrically opposed electrodes and an application in vitro. The experimental set-up consisted of a water tank and a 16-electrode prototype probe 50 mm in diameter. Data sets were collected in the presence of conductivity perturbations produced by small size insulators or conductors and a 7.5% constant perturbation model. The presented images, although reconstructed using a simple retro-projection algorithm, demonstrate the feasibility of the method. Improvements in data collection and image reconstruction are possible.     

Water dynamics in hectorite clays: influence of temperature studied by coupling neutron spin echo and molecular dynamics

Within the wider context of water behavior in soils, and with a particular emphasis on clays surrounding underground radioactive waste packages, we present here the translational dynamics of water in clays in low hydrated states as studied by coupling molecular dynamics (MD) simulations and quasielastic neutron scattering experiments by neutron spin echo (NSE). A natural montmorillonite clay of interest is modeled by a synthetic clay which allows us to understand the determining parameters from MD simulations by comparison with the experimental values. We focus on temperatures between 300 and 350 K, i.e., the range relevant to the highlighted application. The activation energy Ea experimentally determined is 6.6 kJ/mol higher than that for bulk water. Simulations are in good agreement with experiments for the relevant set of conditions, and they give more insight into the origin of the observed dynamics.     

A simulation of the temperature distribution in the SPIRAL target

We developed a model and a computer program to calculate the temperature distribution in the target which will be used in the SPIRAL project a GANIL. The results of the numerical simulation are compared with measurements performed with several types of targets.     

A Model for the Assessment of Wheel–Rail Contact in the Presence of Solid Contaminants

An analytical model for the assessment of a contact in the presence of a solid contaminant is presented, mainly aimed at studying the damage to railway wheels and rails operating in third-body-contaminated environments. The model, developed under 2D plane strain idealization, includes multiple evenly spaced rigid cylindrical contaminant bodies entrapped between two elastic cylinders. It allows a very fast calculation of the pressure distribution on the surfaces in contact and it can be used for evaluating the stress field in the subsurface region, at both the small scale of the contact between the main body and the contaminant body and the full scale of the contact between the two main bodies. The model was validated by comparison with finite element (FE) analyses, showing its accuracy. Some examples of application showed the model’s ability to predict the limit of the influence of the solid contaminant bodies and the depth where cyclic plasticity phenomena occur in wheel–rail contacts.     

Extraction of information on elder motor ability from clinical and biomechanical data through data mining

This study aimed at evaluating the additional knowledge provided by a biomechanical test coupled with clinical tests for motor ability assessment. A database including clinical test scores and sit-to-stand test variables obtained from 110 medically stable elderly subjects was submitted to data mining by searching for association rules. The presence of rules revealed some redundancies due to sample homogeneity, as mainly observed in the joint analysis of a questionnaire for daily activities assessment (Nottingham test) and the sit-to-stand, and due to similar evaluated information, as resulted from the joint analysis of a balance and gait scale (Tinetti test) and the sit-to-stand. Conversely, when no association rules were found, the tests carried unrelated information. The associations mined while analysing these clinical tests encouraged the integration of biomechanical tests, increasing significantly its clinical applicability and reducing the information redundancy. The information extracted also allowed to highlight rules typical of elderly persons that may serve as a knowledge-based tool for the detection of possible deviation from normality.