Constructed wetland as a low cost and sustainable solution for wastewater treatment adapted to rural settlements: the Chorfech wastewater treatment pilot plant

The paper presents the detailed design and some preliminary results obtained from a study regarding a wastewater treatment pilot plant (WWTPP), serving as a multistage constructed wetland (CW) located at the rural settlement of 'Chorfech 24' (Tunisia). The WWTPP implemented at Chorfech 24 is mainly designed as a demonstration of sustainable water management solutions (low-cost wastewater treatment), in order to prove the efficiency of these solutions working under real Tunisian conditions and ultimately allow the further spreading of the demonstrated techniques. The pilot activity also aims to help gain experience with the implemented techniques and to improve them when necessary to be recommended for wide application in rural settlements in Tunisia and similar situations worldwide. The selected WWTPP at Chorfech 24 (rural settlement of 50 houses counting 350 inhabitants) consists of one Imhoff tank for pre-treatment, and three stages in series: as first stage a horizontal subsurface flow CW system, as second stage a subsurface vertical flow CW system, and a third horizontal flow CW. The sludge of the Imhoff tank is treated in a sludge composting bed. The performances of the different components as well as the whole treatment system were presented based on 3 months monitoring. The results shown in this paper are related to carbon, nitrogen and phosphorus removal as well as to reduction of micro-organisms. The mean overall removal rates of the Chorfech WWTPP during the monitored period have been, respectively, equal to 97% for total suspended solids and biochemical oxygen demand (BOD5), 95% for chemical oxygen demand, 71% for total nitrogen and 82% for P-PO4. The removal of E. coli by the whole system is 2.5 log units.     

Linear and nonlinear viscoelastic and viscoplastic analysis of asphalt binders with warm mix asphalt additives

Warm-Mix Asphalt (WMA) is a widely used product, which proved a contribution to the reduction in asphalt mixing and compaction temperatures. This reduction leads to lower fuel consumption and smoke emission in asphalt plants. Most of the characterisation of binders used in WMA has focused in the past on measuring linear viscoelastic properties and associated Superpave parameters. Several studies have shown that the average stresses and strains of the asphalt mixture remain mostly within the linear viscoelastic response. However, localised strains in the binder phase of the mixture could reach values high enough to induce nonlinear viscoelastic and viscoplastic deformations. Therefore, this study focuses on an experimental and analytical evaluation of linear, nonlinear viscoelastic and viscoplastic responses of selected binders modified for use in WMA. The first part of the paper analyses the linear viscoelastic material properties and their ability to evaluate permanent deformation resistance. Then, the non-recoverable creep compliance parameter obtained from the Multiple Stress Creep Recovery (MSCR) test is analysed to assess the nonlinear response and permanent deformation of asphalt binders. The paper utilises a nonlinear plasto-viscoelastic (NPVE) approach to assess and quantify the nonlinear plasto-viscoelastic response of binders by separating the recoverable and irrecoverable strains measured in the MSCR test. Two WMA additives were included in this study by mixing them with polymer-modified and unmodified asphalt binders. Analysis of results showed that the NPVE approach captured a higher percentage of recovery than the NLVE approach. However, binder’s performance evaluation and ranking did not change by adopting the NPVE approach. The nonlinear viscoelastic parameters provided insight on the behaviour of asphalt binders mixed with WMA additives during loading cycles. Sasobit showed higher influence than Advera on binders in resisting permanent deformation by increasing the recoverable strain during the unloading phase.     

Novel nano polymeric system containing biosynthesized core shell silver/silica nanoparticles for functionalization of cellulosic based material

An innovative strategy for functional finishing of cellulosic based materials is based on the incorporation of a thin layer of surface modifying systems (SMS) in the form of stimuli-sensitive nanogels containing combining metal nanoparticles and silica. The silver–silica core–shell nanoparticles (NPs) were synthesized by simple one pot chemical method. Silica/silver nanoparticles have been synthesized using low concentration of dextran as reducing and stabilizing agent and using ascorbic acid as antioxidant agent. The core–shell NPs were characterized for their structural, morphological, compositional and optical behaviour using X-ray diffraction, scanning electron microscopy and energy dispersive X-ray analysis. Stimuli-responsive nanogel was prepared by copolymerization of poly(N-isopropylacrylamide) with pullulan, results in a nanogel that is responsive to both temperature and pH, the nano-particulate hydrogel of poly-NiPAAm-pullulan copolymer was synthesized using surfactant-free emulsion method. The prepared nano-particles were used during the preparation steps of the pullulan nanogel to obtain nanogel/combining metal/silica NPs to produce a composite materials. The nanoparticle size in dry (collapsed) state is estimated at 250 nm by SEM and TEM, and effect of temperature and pH on gel-nanoparticles was investigated by DLS and UV–vis spectrophotometry. The incorporation of the nanoparticles to cellulosic material was done by a simple pad dry-cure procedure from aqueous nanoparticle dispersion that contained a cross-linking agent. This application method provided sufficient integrity to coating by maintaining the responsiveness of surface modifying system. The stimuli responsiveness of modified cellulosic materials has been confirmed in terms of regulating its water uptake in dependence of pH and temperature.     

Effect of extraction methods on kinetic,chemical composition and antibacterial activities of Tunisian Thymus vulgaris. L. essential oil

The present study aims to compare two innovative extraction techniques: microwave-assisted hydrodistillation (MAHD) and solvent-free microwave extraction (SFME) through traditional extraction techniques: hydrodistillation (HD) and steam distillation (SD) for their efficiency in the extraction of the volatile compounds from Tunisian Thymus vulgaris leaves; the kinetic, yield, composition and antibacterial activities of the essential oil were assessed in vitro. Results show that the essential oils extracted by microwaves were quantitatively (yield) similar to those obtained through the conventional methods, but qualitatively, essential oils analysed by gas chromatography–mass spectrometry (GC–MS) presented 17, 11, 11 and 8 compounds obtained through SFME, MAHD, SD and HD, respectively, mostly consisting of carvacrol (89.24–41.17%), followed by γ-terpinene (11.37–1.37%) and para-cymene (27.95–2.05%). The essential oils were screened for antibacterial activity against 5 microorganisms. All essential oils obtained by studied extraction methods showed the same resistance against Gram (?) and Gram (+) bacteria. The SFME method gave the best results: rapid kinetic of extraction (30 min vs. 35 min for MAHD, 120 min for SD, and 180 min for HD), less energy saving and cleanest process.     

On the prediction of gas hold-up in two-phase flow systems using an Euler–Euler model

We quantify the ability of the two-fluid Euler–Euler model to predict the overall gas hold-up during two-phase flow in vertical columns using a combination of experiments and simulations. Gas hold-up in a bubble column and gas hold-up in the less-frequently studied co-current flow are investigated. For homogeneous flow characterized by nearly uniform bubble size, Euler–Euler model predictions are within 10% of the experimental values for both modes of operation, if the bubble diameter supplied as input to the model is the average bubble diameter in the physical system. This also holds true for heterogeneous flow in bubble columns despite the presence of a broad distribution of bubble sizes, if turbulence and bubble swarm effects on momentum exchange between phases are properly accounted for. Swarm corrections adequate for bubble columns, are less successful for co-current heterogeneous flow, for which gas hold-up predictions are least accurate (average error of 22%).     

The inhibition effect of two commercial compounds on interface steel/natural softened water

The protection against the corrosion of the carbon steel in aqueous environment by commercial inhibitors, based of nitrite and alkanolamine, has been studied by electrochemical impedance spectroscopy (EIS) and several analytic methods. An inhibitor’s efficiency has been determined with the two compounds on polished surface in presence of softened water. The results show that the two inhibitors act by the formation of protective layer on interface steel/electrolyte but the efficiency is more important in the case of the nitrite compound thanks to the formation of film with thickness estimated by Atomic force microscopy (AFM) at 0.8 μm after 102 days of immersion. In the case of the nitrites, the inhibitor film is a porous layer, weak conductor and presents a considerable increase of the charge transfer resistance with time. This is a result of an interest protection of the surface against corrosion. The low frequencies limit (L _LF) reaches about 150 kOhm cm² after 59 days of immersion. In the case of the alkanolamine, XPS (X-Rray Spectroscopy) show that the film formed is richer of Fe ions but is offered a considerable protection of the interface, its thickness is about 0.26 μm and L _LF reaches about 35.5 kOhm cm² after 61 days of immersion. The influence of surface state is discussed in this paper, in fact on raw surface steel, no inhibitor efficiency is observed. A few protections are given with a crude surface in contact with water softened in presence of the nitrite compound.     

A decision model for operating two alternate energy generating systems

A solar energy generating system is to be supplemented by two conventional generating systems. A method for investigating the effect of various operating policies of the combined system on the productivity and availability is developed. Using a Markov-Chain approach for computing the long-run expectations of the objectives it was demonstrated that the use of a stand-by mode for one of the conventional systems was optimal. Numerical examples are presented to demonstrate the methodology both for special and more general cases.     

Speech recognition in living rooms: Integrated speech enhancement and recognition system based on spatial,spectral and temporal modeling of sounds

Research on noise robust speech recognition has mainly focused on dealing with relatively stationary noise that may differ from the noise conditions in most living environments. In this paper, we introduce a recognition system that can recognize speech in the presence of multiple rapidly time-varying noise sources as found in a typical family living room. To deal with such severe noise conditions, our recognition system exploits all available information about speech and noise; that is spatial (directional), spectral and temporal information. This is realized with a model-based speech enhancement pre-processor, which consists of two complementary elements, a multi-channel speech–noise separation method that exploits spatial and spectral information, followed by a single channel enhancement algorithm that uses the long-term temporal characteristics of speech obtained from clean speech examples. Moreover, to compensate for any mismatch that may remain between the enhanced speech and the acoustic model, our system employs an adaptation technique that combines conventional maximum likelihood linear regression with the dynamic adaptive compensation of the variance of the Gaussians of the acoustic model. Our proposed system approaches human performance levels by greatly improving the audible quality of speech and substantially improving the keyword recognition accuracy.