High speed propulsion: Performance advantage of advanced materials

High-speed air breathing propulsion systems have many attractive military and civil applications. The high propulsive efficiency of these systems allows the exploitation of speed, distance, and bigger payloads, or any combination of the three. The severe operating conditions of these systems require particular attention to overall thermal management of the engine/air-frame. Fuel-cooling the engine structure is a viable way of maintaining thermal balance over a range of flight conditions. Air Force applications have focused on using endothermic hydrocarbon fuels to address this issue because of their compatibility with the military operations. Recent ground tests of scramjet engines have demonstrated adequate performance utilizing state-of-the-art technology in materials. This progress has paved the way for an expendable flight test vehicle in the near future. In order to take full advantage of the capabilities of this propulsion system, advances in fuel-cooled structures, high temperature un-cooled materials, and increased heat capacity of hydrocarbon fuels will be needed to enable expendable systems to reach higher Mach numbers. An additional benefit would be realized in future reusable systems.     

Biapenem versus imipenem/cilastatin in the treatment of complicated intra-abdominal infections: report from a Swedish Study Group

The objective of this study is to describe usual medical management and costs associated with recurrent respiratory infections in subjects with chronic obstructive bronchitis in France. A prospective survey was performed in Autumn 1994 on a national sample of private practice pulmonologists (N = 71). Two hundred forty-four patients, presenting at least one infection of the lower respiratory tract, were included. Bronchitis was the most frequent acute exacerbation observed (94%). Pneumonia concerned 9% of the patients. Biological tests, X-rays and pulmonary function tests were prescribed for, respectively, 59, 65 and 45% of the patients. Following the visit, 15 patients were hospitalized (6%). The direct medical cost per acute exacerbation was estimated 3,289 francs (1994 value) of which 60% were hospital-related. An average 10.4 day sick-leave was prescribed to 21% of patients in employment. For those patients, this sick-leave was associated to an extra-cost of 1,264-1,876 francs for Social Security and of 0-2,553 francs out of pocket per episode varying according to their Benefit Regimen.     

IEEE standard 802.16: a technical overview of theWirelessMANTM air interface for broadband wirelessaccess

The broadband wireless access industry, which provides high-rate network connections to stationary sites, has matured to the point at which it now has a standard for second-generation wireless metropolitan area networks. The IEEE standard 802.16, with its WirelessMAN^TM air interface, sets the stage for widespread and effective deployments worldwide. This article overviews the technical medium access control and physical layer features of this new standard     

Neural fuzzy logic programming

A foundational development of propositional fuzzy logic programs is presented. Fuzzy logic programs are structured knowledge bases including uncertainties in rules and facts. The precise specifications of uncertainties have a great influence on the performance of the knowledge base. It is shown how fuzzy logic programs can be transformed to neural networks, where adaptations of uncertainties in the knowledge base increase the reliability of the program and are carried out automatically.     

Complement-Opsonized Nano-Carriers Are Bound by Dendritic Cells (DC) via Complement Receptor (CR)3, and by B Cell Subpopulations via CR-1/2, and Affect the Activation of DC and B-1 Cells

The development of nanocarriers (NC) for biomedical applications has gained large interest due to their potential to co-deliver drugs in a cell-type-targeting manner. However, depending on their surface characteristics, NC accumulate serum factors, termed protein corona, which may affect their cellular binding. We have previously shown that NC coated with carbohydrates to enable biocompatibility triggered the lectin-dependent complement pathway, resulting in enhanced binding to B cells via complement receptor (CR)1/2. Here we show that such NC also engaged all types of splenic leukocytes known to express CR3 at a high rate when NC were pre-incubated with native mouse serum resulting in complement opsonization. By focusing on dendritic cells (DC) as an important antigen-presenting cell type, we show that CR3 was essential for binding/uptake of complement-opsonized NC, whereas CR4, which in mouse is specifically expressed by DC, played no role. Further, a minor B cell subpopulation (B-1), which is important for first-line pathogen responses, and co-expressed CR1/2 and CR3, in general, engaged NC to a much higher extent than normal B cells. Here, we identified CR-1/2 as necessary for binding of complement-opsonized NC, whereas CR3 was dispensable. Interestingly, the binding of complement-opsonized NC to both DC and B-1 cells affected the expression of activation markers. Our findings may have important implications for the design of nano-vaccines against infectious diseases, which codeliver pathogen-specific protein antigen and adjuvant, aimed to induce a broad adaptive cellular and humoral immune response by inducing cytotoxic T lymphocytes that kill infected cells and pathogen-neutralizing antibodies, respectively. Decoration of nano-vaccines either with carbohydrates to trigger complement activation in vivo or with active complement may result in concomitant targeting of DC and B cells and thereby may strongly enhance the extent of dual cellular/humoral immune responses.     

Formation and stability of barium aluminate and cerate in NOx storage-reduction catalysts

The formation and stability of BaAl₂O₄ and BaCeO₃ in Pt-Ba/Al₂O₃ and Pt-Ba/CeO₂ based NO_x storage-reduction (NSR) catalysts has been investigated using kinetic measurements, X-ray diffraction, thermal analysis and X-ray absorption spectroscopy. In as-prepared state, the Ba-component in the NSR catalysts was made up of amorphous BaO and BaCO₃. The formation of BaAl₂O₄ started above 850 °C, whereas the formation of BaCeO₃ was already observed at 800 °C and was faster than that of BaAl₂O₄. The stability of BaAl₂O₄ and BaCeO₃ in various liquid and gaseous atmospheres was different. BaAl₂O₄ was rapidly hydrated at room temperature in the presence of water and transformed to Ba(NO₃)₂ and γ-alumina in the presence of HNO₃, whereas BaCeO₃ was decomposed to much lower extent under these conditions. Interestingly, BaCeO₃ was transformed to Ba(NO₃)₂/CeO₂ in the presence of NO₂/H₂O at 300–500 °C. Also, the presence of CO₂ led to decomposition of barium cerate, which has important consequences for the catalyst ageing under NO_x-storage conditions and can be exploited for regeneration of thermally aged NSR-catalysts.     

Relationships between ergonomics and quality in assembly work

Several studies indicate a relationship between ergonomic work conditions and the quality of the work. The purpose of this study was to evaluate relationships between a number of ergonomic conditions and product quality in car assembly. The most physically demanding tasks, the tasks with the most difficult parts to assemble, and the most psychologically demanding tasks, were identified by interviews with experienced assembly workers. Information on quality deficiencies was obtained from the internal quality statistics of the company and from interviews with quality control personnel. The results showed that the quality deficiencies were three times as common for the work tasks with ergonomics problems, compared with the other tasks. An increased risk of quality deficiencies was seen for all three categories of ergonomics problems investigated. Direct causes of quality deficiencies were identified, such as discomfort from strained parts of the body, organizational factors and time pressure. The analyses pointed to certain types of task that were more likely than others to cause quality problems. The results also showed that an important factor for job satisfaction was the possibility for the workers to perform their tasks with high quality. The study therefore confirms close relationships between ergonomics and quality, and thereby points to the possibility of conducting integrated change programmes aimed at improving work quality and work conditions simultaneously.     

Sorting and disposing of waste at recycling centres - A users perspective

This paper investigates Swedish recycling centres from the users' perspective. The aim was to describe the characteristics and experiences of the users and their activities when sorting and disposing of waste, and to identify improvements for the users. The typical recycling centre user is a recently retired man, living in a house with a garden, having travelled 5 km alone in his own car. The users requested longer opening hours and better information available at home and at the recycling centre. The major difficulty for the users is to understand which fraction their waste belongs to, and consequently into which container they should throw it. The most important sources of sorting information, in addition to experience from earlier visits, are signs and asking the personnel. Although the service at recycling centres is perceived positively by a majority of users, substantial improvements can still be made, and a number of such suggestions are given.     

Next generation remote critical care through service-oriented architectures: challenges and opportunities

Health care providers and governments are under pressure to maintain and improve the quality of care to an increasing volume of critical care patients at either end of the life cycle, namely premature and ill term babies together with the elderly. The provision of a service of critical care utilizing real time service-oriented architectures has the potential to enable clinicians to be supported in the care of a greater number patients that are, perhaps more importantly, located elsewhere to their intensive care units. This paper presents a review of recent research in the application of computing and IT to support the service of critical care and determines the trends and challenges for the application of real time service-oriented architectures within the domain. It then presents some case study–based research on the design of a service-oriented architecture-based approach to support two aspects of critical care namely elderly care and neonatal intensive care to provide further context to trends and opportunities.