Differential expression and distribution of focal adhesion and cell adhesion molecules in rat hepatocyte differentiation

The present study has examined the distribution of axons of differing sizes in the optic pathway of the ground squirrel. Axon diameters were measured from electron micrographs at various locations across sections of the optic nerve and tract, and total distributions and numbers were estimated. In both the nerve and tract, roughly 1.2 million optic axons were present. The population of optic axons had a unimodal size distribution, peaking at 0.9 microm in diameter and having an extended tail toward larger diameters. Local axon diameter distributions in the optic tract indicated distinct (though partially overlapping) axon diameter classes, including one of fine sizes peaking at 0.8-0.9 microm, a second of medium sizes peaking around 1.7-1.8 microm, and a third composed of the larger fibers with diameters up to 4.8 microm. The fine-caliber axons were found at all locations in the tract, and were the only axons present immediately adjacent to the pia, while the medium- and coarse-caliber axons were found at deeper locations. Curiously, the larger axons were found primarily in the medial parts of the tract, where axons from the dorsal retina normally course. A similarly restricted distribution of the larger axons was observed in the dorsotemporal parts of the optic nerve, suggesting that this difference in the tract may relate to an asymmetric distribution of ganglion cells on the retina giving rise to these axons. Measurements of axonal size taken within the optic fiber layer in dorsal and ventral parts of the retina confirmed this asymmetry, consistent with previous demonstrations of soma size differences in the dorsal versus ventral retina. The partial segregation of axons by size in the optic tract of the ground squirrel then reflects both the asymmetric distribution of retinal ganglion cell classes and the chronotopic reordering of optic axons that occurs within the chiasmatic region.     

Characterisation of cut and chip behaviour for NR,SBR and BR compounds with an instrumented laboratory device

ABSTRACT

Understanding the cut and chip (CC) effect in rubber is important for successful product development for tires used in off-road or poor road conditions and for other demanding applications of rubber. This research describes a laboratory testing method for characterising the CC fracture behaviour of rubber using a device that controls and records multiple applied loads and displacements during cyclic impact to the surface of a solid rubber specimen to mimic and quantify the CC damage experienced by tire tread compounds. To study the capabilities of the instrument, three model compounds were studied that are based on carbon black reinforced compounds of common elastomers used in tire treads: natural rubber (NR), styrene-butadiene rubber (SBR), and butadiene rubber (BR). These polymers have well-established CC tendencies in field performance of tire treads, with NR exhibiting the best CC resistance followed by SBR and finally BR. The same trend was found with the rubber impact testing approach that allowed the CC behaviour to be quantified using a new physical parameter which is the CC propensity (P). The relative ranking for CC resistance for the three compounds followed the fatigue crack growth resistances of the materials but was exactly opposite to the ranking of DIN abrasion resistance. This provides evidence that CC damage from impact by mm-scale asperities and abrasion of rubber against μm-scale asperities exhibit distinct characteristics in rubber.     

Supervised Multi‐Rejector of Periodic Disturbances for Nonlinear Systems Using Decoupled State Multimodel

In this paper, a multi‐rejector of periodic disturbances is proposed for discrete‐time nonlinear systems represented by a decoupled state multimodel. We report a decoupled state multimodel repetitive‐predictive control based on a supervised algorithm to ensure reference trajectory tracking and periodic disturbances rejection. Partial predictors associated to the local controllers make the best choice of the most valid partial controller that meets the desired closed loop performances. The effectiveness of the supervised multi‐rejector is shown via a simulation example. The obtained results are satisfactory and show a good rejection of periodic disturbances and reference trajectory tracking.     

An analysis of the transition proportion for binarization in handwritten historical documents

In this paper, we will present a mathematical analysis of the transition proportion for the normal threshold (NorT) based on the transition method. The transition proportion is a parameter of NorT which plays an important role in the theoretical development of NorT. We will study the mathematical forms of the quadratic equation from which NorT is computed. Through this analysis, we will describe how the transition proportion affects NorT. Then, we will prove that NorT is robust to inaccurate estimations of the transition proportion. Furthermore, our analysis extends to thresholding methods that rely on Bayes rule, and it also gives the mathematical bases for potential applications of the transition proportion as a feature to estimate stroke width and detect regions of interest. In the majority of our experiments, we used a database composed of small images that were extracted from DIBCO 2009 and H-DIBCO 2010 benchmarks. However, we also report evaluations using the original (H-)DIBCO?s benchmarks.     

Performance evaluation and implementation complexity analysis framework for ZF based linear massive MIMO detection

Wireless Networks - This paper discusses a framework for algorithm-architecture synergy for (1) performance evaluation and (2) FPGA implementation complexity analysis of linear massive MIMO...     

Electrophoretic impregnation of porous anodizing layer by synthesized TiO<Subscript>2</Subscript> nanoparticles

This paper deals with the elaboration of a stable suspension of TiO₂ nanoparticles and their incorporation by electrophoretic deposition into pores of an anodized 5754 aluminum alloy. The as-synthesized TiO₂ nanopowder was characterized by the X-ray diffraction, scanning and transmission electron microscopy, energy dispersive X-ray spectroscopy and IR spectroscopy. During this work, both the transmission electron microscopy and particle analysis showed that the resulting particles had a narrow size distribution with a crystallite size of about 15 nm. The zeta potential and stability of TiO₂ nanoparticles dispersed with poly(acrylic acid) in an aqueous solution were also measured. A porous anodic film was synthesized in the phosphoric acid-base electrolyte and then filled by 15 nm TiO₂ particles via electrophoresis. In addition, the effect of poly(acrylic acid) and pH on the suspension stability has been investigated. It was also demonstrated that by adding glycine in buffered suspension gelating phenomenon can be avoided that inhibits the insertion of nanoparticles inside the pores of an anodic film. It was also noted that an applied electric field greatly influences the electrophoretic deposition process. The field emission gun-scanning electron microscopy observations showed that larger (125 nm in diameter) and linear (6 μm in length) pores are successfully filled in 5 min.     

Impact of the Cd2+ treatment on the electrical properties of Cu2ZnSnSe4 and Cu(In,Ga)Se2 solar cells

The present contribution aims at determining the impact of modifying the properties of the absorber/buffer layer interface on the electrical performance of Cu₂ZnSnSe₄ (CZTSe) thin‐film solar cells, by using a Cd²⁺ partial electrolyte (Cd PE) treatment of the absorber before the buffer layer deposition. In this work, CZTSe/CdS solar cells with and without Cd PE treatment were compared with their respective Cu(In,Ga)Se₂ (CIGSe)/CdS references. The Cd PE treatment was performed in a chemical bath for 7 min at 70 °C using a basic solution of cadmium acetate. X‐ray photoemission spectroscopy measurements have revealed the presence of Cd at the absorber surface after the treatment. The solar cells were characterized using current density–voltage (J–V), external quantum efficiency, and drive‐level capacitance profiling measurements. For the CZTSe‐based devices, the fill factor increased from 57.7% to 64.0% when using the Cd PE treatment, leading to the improvement of the efficiency (η) from 8.3% to 9.0% for the best solar cells. Similar observations were made on the CIGSe solar cell reference. This effect comes from a considerable reduction of the series resistance (R_S) of the dark and light J–V, as determined using the one‐diode model. The crossover effect between dark and light J–V curves is also significantly reduced by Cd PE treatment. Copyright © 2015 John Wiley & Sons, Ltd.     

An adaptive tracking algorithm for direction finding and array shape estimation in a nonstationary environment

This paper presents an adaptive tracking algorithm for the subspace-based direction of arrival estimation of multiple sources in a nonstationary, environment. The nonstationarities are due to moving sources or to timevarying distortions of the sensor array shape. The proposed algorithm relies on the properties of a linear operator, referred to as the Propagator, which only exploits the linear independency of the source steering vectors. The Propagator allows not only the calibration of the array shape, but also the determination of the source and the noise subspaces without any eigendecomposition of the cross-spectral matrix of the received signals. A gradientbased adaptive algorithm is here proposed for the on-line estimation of the Propagator. A theoretical analysis of the behaviour of this algorithm in a nonstationary environment is given. Simulations are carried out in the case of moving sources and in the case of a time-varying array shape. They exhibit the good performances of the proposed algorithm.     

Combustion synthesis of Mg2Si

Magnesium silicide and its derivatives are perceived as light-weight eco-friendly materials for multiple applications, because of the advantageous combination of physical, mechanical and chemical properties. The principal components, silicon and magnesium, are abundant in nature and thus easily accessible. Manufacturing of Mg₂Si-based materials is, however, challenging and a lot of efforts have been made to better control their composition and microstructure. In this work, magnesium silicide dense sinters were successfully produced by self-propagating reaction and hot pressing. The reaction was studied by DTA/TG and high-temperature microscopy. Composition and microstructure of reactants and products were examined by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). Property assessment comprised density, hardness, elastic modulus, specific heat, thermal diffusivity, and electrical conductivity.