The Physical Context of Creativity

Creative processes are complex and consist of sub‐processes, e.g. value creation, scaffolding, imagination and materialization. Creativity takes place in a physical context, i.e. in a confined space. Such space restricts and enables the free flow of sensory experiences and proximity of other people. The confinements may make certain sensory experiences available, e.g. vision of source material, sight and sound (including noise). This framing allows certain cognitive processes and restricts others. This may induce emotions that, in turn, facilitate or reduce the enhancement of creativity. Physical space affects the well‐being of people, the channels of information, the availability of knowledge tools and sets the stage for coherence and continuity, which may contribute to competitive advantages.     

Prolonged release Matrix Pellets Prepared by Melt Pelletization I. Process Variables

A melt pelletization process was investigated in an 8 litre laboratory scale high shear mixer using a formulation with paracetamol, glyceryl monostearate 40-50, and microcrystalline wax. The effects of jacket temperature, product temperature during massing, product load, massing time and impeller speed were investigated by means of factorially designed experiments. The maximum yield of pellets in the range of 500-1400μm was found to approx. 90%. For process conditions preventing deposition of moist mass, the process was found to be reproducible. Impeller speed and massing time were found to be important process variables. Remarkably low in vitro drug release rates were observed in USP-dissolution tests.     

Oxidative flavour deterioration of fish oil enriched milk

The oxidative deterioration of milk emulsions supplemented with 1.5 wt‐% fish oil was investigated by sensory evaluation and by determining the peroxide value and volatile oxidation products after cold storage. Two types of milk emulsions were produced, one with a highly unsaturated tuna oil (38 wt‐% of n‐3 fatty acids) and one with cod liver oil (26 wt‐% of n‐3 fatty acids). The effect of added calcium disodium ethylenediaminetetraacetate (EDTA) on oxidation was also investigated. Emulsions based on cod liver oil with a slightly elevated peroxide value (1.5 meq/kg) oxidised significantly faster than the tuna oil emulsions, having a lower initial peroxide value (0.1 meq/kg). In the tuna oil emulsions the fishy off‐flavour could not be detected throughout the storage period. Addition of 5—50 ppm EDTA significantly reduced the development of volatile oxidation products in the cod liver oil emulsions, indicating that metal chelation with EDTA could inhibit the decomposition of lipid hydroperoxides in these emulsions. This study showed that an oxidatively stable milk emulsion containing highly polyunsaturated tuna fish oil could be prepared without significant fishy off‐flavour development upon storage, provided that the initial peroxide value was sufficiently low.     

Mechanical properties of moist agglomerates in relation to granulation mechanisms part I. Deformability of moist,densified agglomerates

The mechanical properties of moist samples of fine, polydisperse powders are investigated by measuring the tensile strength by a diametrical compression test and the stress—strain relationship of samples exposed to uniaxial compression. The strengths determined by the two methods correlate well. The strength of moist samples compressed to porosities comparable to the level of intragranular porosities achieved by granulation in high-speed mixers is shown to be influenced significantly by particle interactions in addition to mobile liquid bondings. For a particular material the strength is controlled mainly by porosity and liquid saturation. It is shown that the effect of a growing liquid saturation is to reduce particle interactions and thus to facilitate densification during granulation. The deformability of moist samples, which is dependent on strength and deformation behaviour, is assessed for lactose and dicalcium phosphate.     

Mechanisms of cell damage and enzyme release

Release of intracellular enzymes to the extracellular space is a marker of cell damage in various diseases, e.g. liver, heart and muscle diseases. In the normal state the plasma membrane is impermeable to enzymes, and enzyme release, therefore, indicates a severe change of the membrane integrity. This review deals with the present knowledge about cellular changes leading to enzyme release, which may be caused either by energy depletion, e.g. in ischemia or shock, or by a direct membrane damage as caused by various toxins and inflammatory products. Inhibition of the energy metabolism results in ATP depletion leading to fluxes of Na+, K+ and Cl- down their gradients across the membrane and swelling of the cell. Subsequently Ca2+ leak into the cell activating phospholipases and the formation of eicosanoids, affecting the cytoskeleton and, perhaps, activating the formation of oxidants. The exact "point of no return" is not known but an uncontrolled Ca2+ activity in the cell probably has an important role in initiating the irreversible changes. The result of these reactions and probably other unknown reactions as well is damage to the membrane. This is evident morphologically at first by the formation of blebs that appears in the reversible phase, and later on by rupturing of the membrane, a sign of irreversible damage. A very small part of the enzyme release may occur in the reversible phase when blebs detach with resealing of the membrane, but the substantial part of enzyme release occurs as a result of irreversible cell damage when ATP has decreased to a low level and a serious disruption of the membrane integrity has taken place. All the secondary affections of the membrane during energy depletion may also occur as a primary direct membrane damage that more or less may affect the energy metabolism secondarily. The cell damage and enzyme release after some types of direct membrane damage is almost independent of the cellular energy metabolism whereas other types of direct membrane damage are counteracted by the cell by energy consuming reactions and, therefore, the final cell damage is a concerted action of the direct membrane damage and the energy depletion. This also means that a direct membrane damage may be more severe for the cell in energy depleted states than in the normal state. As in energy dependent cell damage the substantial part of enzyme release after a direct membrane damage is due to irreversible cellular changes. It appears that although the knowledge of the molecular basis of cell damage and enzyme release has grown there are still many questions to be answered about these complex processes.     

Exploiting equivalence reduction and the sweep-line method for detecting terminal states

State-space exploration is one of the main approaches to computer-aided verification and analysis of finite-state systems. It is used to reason about a wide range of properties during the design phase of a system, including system deadlocks. Unfortunately, state-space exploration needs to handle huge state spaces for most practical systems. Several state-space reduction methods have been developed to tackle this problem. In this paper, we develop algorithms for combining two of these methods: state equivalence class reduction and the sweep-line. The algorithms allow deadlocks to be detected by recording terminal states of the system on-the-fly during state-space exploration. We derive expressions for the complexity of the algorithms and demonstrate their usefulness with an industrial case study. Our results show that the combined method achieves at least a six-fold reduction of the state space for interesting parameter values compared with either method used in isolation while still proving the desired system property of the terminal states. The runtime performance of the combined method is almost the same as that of the equivalence class method over the chosen parameter range. Moreover, the improvement in space reduction increases with increased parameter values.     

Parameter inference in a computational model of haemodynamics in pulmonary hypertension

Pulmonary hypertension (PH), defined by a mean pulmonary arterial pressure (mPAP) greater than 20 mmHg, is characterized by increased pulmonary vascular resistance and decreased pulmonary arterial compliance. There are few measurable biomarkers of PH progression, but a conclusive diagnosis of the disease requires invasive right heart catheterization (RHC). Patient-specific cardiovascular systems-level computational models provide a potential non-invasive tool for determining additional indicators of disease severity. Using computational modelling, this study quantifies physiological parameters indicative of disease severity in nine PH patients. The model includes all four heart chambers, the pulmonary and systemic circulations. We consider two sets of calibration data: static (systolic and diastolic values) RHC data and a combination of static and continuous, time-series waveform data. We determine a subset of identifiable parameters for model calibration using sensitivity analyses and multi-start inference and perform posterior uncertainty quantification. Results show that additional waveform data enables accurate calibration of the right atrial reservoir and pump function across the PH cohort. Model outcomes, including stroke work and pulmonary resistance-compliance relations, reflect typical right heart dynamics in PH phenotypes. Lastly, we show that estimated parameters agree with previous, non-modelling studies, supporting this type of analysis in translational PH research.