Oxidation of doped europium in BaMgAl10O17 by annealing studied by x‐ray‐absorption fine‐structure measurements

Abstract— We studied the influence of annealing in air on doped europium in BaMgAl₁₀O₁₇ by performing x‐ray absorption fine‐structure measurements. We determined the oxidation of doped divalent europium by annealing in air at over 500°C. The interatomic distance between the europium and the surrounding oxygen atoms was compressed by oxidation. It also appears that the oxidation process of europium is determined by the diffusion of oxygen into BaMgAl₁₀O₁₇.     

Fuzzy inference and fuzzy inference processor

Fuzzy inference, a data processing method based on the fuzzy theory that has found wide use in the control field, is reviewed. Consumer electronics, which accounts for most current applications of this concept, does not require very high speeds. Although software running on a conventional microprocessor can perform these inferences, high-speed control applications require much greater speeds. A fuzzy inference date processor that operates at 200000 fuzzy logic inferences per second and features 12-b input and 16-b output resolution is described     

Frequency control techniques in coherent multichannel LAN's

This paper describes frequency control techniques for cold start and channel recognition functions in coherent multichannel local area networks. A Z-cut quartz etalon can be used to stabilize the optical transmitter frequencies. The capture range and the influence of humidity on a Fabry-Perot etalon are discussed. The frequency deviation of the optical transmitter was estimated to be less than ±1 GHz in the long term. A double AFC loop has been proposed for local LD frequency control. It showed a wide capture range of ±100 GHz. Coherent FDM receiver switching to the desired channel was demonstrated over a range from 0 to 40°C in an experiment     

Theory and characteristics of novel variable reluctance 1X resolver

Although brushless resolvers have been used widely as angular position transducers, they are expensive due to their intricate construction, involving a rotary transformer to supply the exciting coils wound on the rotor poles with the current. It is shown theoretically in this paper that the resolver without rotary transformer or brushes can be realized by simple construction, which consists of the stator core with both 4-poles exciting windings and 2-poles output ones and the rotor core carrying no windings. In this resolver the rotor core has minimum gap at one side and a maximum gap at another side of the diameter. It is characterized by an outer surface form that makes the fluctuation part of gap permeance very in proportion to cos θ, where θ represents the angular position of a point in the air gap with respect to the origin on the rotor, the point of minimum air gap. The method determining the rotor form to embody the aforementioned gap permeance variation is also shown. It has been confirmed not only by simulation but also experiment that the 2-phase output voltages of a model designed based on the theory have sinusoidal waveforms with very small harmonic contents. Moreover, the rotor position detected by processing the output voltages through the conventional resolver/digital converter was within acceptable engineering accuracy.     

Synthesis and electronic property of platinum nanowire and nanoparticle in mesoporous silica template

Platinum nanowires and nanoparticles were selectively synthesized in mesoporous silicas FSM-16 and HMM-1. The nanowires are 3 nm in diameter and several hundred nm to μm in length with high crystallinity. Pt nanowires and nanoparticles can be isolated by dissolving silica matrix with HF. The Pt wires extracted from organosilica HMM-1 have a nanonecklace structure, while the wires from siliceous FSM-16 have a nanorod structure. The extracted Pt nanoparticles (3 nm in size) on HOPG show the Coulomb staircase phenomena in STM/STS analysis. The mechanism for formation of the Pt nanowires is based on the migration of Pt ions in the mesoporous channels.     

In Situ Observation of Zirconia Particles at 1200°C by High-Resolution Electron Microscopy

Zirconia (ZrO₂) particles (average diameter, 30 nm) were observed in an in situ heating experiment up to 1200°C using a 400-kV high-resolution electron microscope. Thermal vibration of atoms on a (001) surface plane was observed at 1100°C. At 1200°C, grain growth and sintering phenomena were recorded on a videotape, showing (100) lattice planes migrating on a surface of a particle. Direct observation of the sintering process on a lattice level was accomplished for the first time.     

Proposal of Service CAD System - A Tool for Service Engineering -

To solve current industrial problems, manufacturers need to supply service rather than materialized products to consumers. We propose a novel engineering paradigm to deal with services, service engineering. We define services as a state change. A service model consists of three sub-models: scope model, view model and flow model. A computer-aided design tool, called Service Explorer, is developed to represent a network of the parameters and determines the influence weight one another. As the result, we verify the usefulness of the design tool.     

Haptic cues as a utility to perceive and recognise geometry

Research has been conducted on how to aid blind peoples’ perceptions and cognition of scientific data and, specifically, on how to strengthen their background in mathematics as a means of accomplishing this goal. In search of alternate modes to vision, researchers and practitioners have studied the opportunities of haptics alone and in combination with other modes, such as audio. What is already known, and has motivated research in this area, is that touch and vision might form a common brain representation that is shared between the visual and haptic modalities and through haptics learning is active rather than passive. In spite of extensive research on haptics in the areas of psychology and neuropsychology, recent advances and rare experiences in using haptic technology have not caused a transfer from basic knowledge in the area of haptics to learning applications and practical guidelines on how to develop such applications. Thus motivated, this study investigates different haptic effects, such as free space, magnetic effects and the bounded box when blind people are given the task of recognising and manipulating classes of 3D objects with which they have varying familiarity. In parallel, this study investigates the applicability of Sjöström’s guidelines on haptic applications development and uses his problem classification to capture knowledge from the experiments. The results of this study show that users can easily recognise and manipulate familiar objects, albeit with some assistance. There is an indication that users completed tasks faster and needed less assistance with magnetic effects. However, they were not as satisfied with this mode. While the results of this study show that haptics have the potential to allow students to conceptualise 3D objects, much more work is needed to exploit this technology to the fullest. Objects with higher complexity are difficult for students, and, in their opinion, the virtual objects (as presented) leave much room for improvement. Sjöström’s error taxonomy proved useful, and four of five sub-guidelines tested were confirmed to be useful in this study.     

Photo-regulated metal coordination of azobenzene polymer having sterically controlled ion binding sites

Summary 2,2-Dimethylazobenzenes having metal chelating ligands at meta-positions were synthesized, and the interaction with metal ions were estimated for syn- and anti-ligands on thermal isomerization. The azobenzenes with the metal-interaction were transformed to vinyl azobenzenes and copolymerized with styrene. The metal extracting ability was found in photo-isomerized polymer having syn-bis(iminodiacetic acid) groups; the selectivity was high for Cu(II) ion.