Reduction of fault current peak in an inductive high-Tc superconducting fault current limiter

This paper dealt with current-limiting performances of an inductive high-T_c superconducting fault current limiter with an auxiliary coil. The fault current limiter mainly consists of the primary copper coil, secondary high-T_c superconducting rings, and auxiliary high-T_c superconducting coils, which are magnetically coupled through three-legged core. The superconducting fault current limiter as a series element in the power system is inserted to limit the fault current. The device presents fast variable-impedance features in the event of a fault condition. The fault current peak can become relatively large for certain ranges of the flux and the fault instant due to the core saturation. The auxiliary coil proposed in this paper was proven to increase the impedance of the SFCL up to more than 31% while preventing the core saturation.     

Green and gold kiwifruit peel ethanol extracts potentiate pentobarbital-induced sleep in mice via a GABAergic mechanism

Kiwifruit is one of the most popular fruits worldwide, and it has various biological properties, including antioxidant, anti-allergic, and cardiovascular protective effects. The peel of kiwifruit, which is a by-product of processing, is a good source of flavonoids; however, its bioactivity has not been widely investigated. In this study, we evaluated the hypnotic effects of green (GRPE, Actinidia deliciosa) and gold (GOPE, Actinidia chinensis) kiwifruit peel ethanol extracts and their solvent fractions, and the possible underlying mechanisms. Oral GRPE and GOPE administration (125–1000 mg/kg) produced a dose-dependent decrease in sleep latency and an increase in sleep duration in pentobarbital-treated mice. Among three different solvent fractions of GRPE and GOPE, ethyl acetate (EA) fractions had the greatest effect on sleep duration at 250 mg/kg. The total flavonoid contents of solvent fractions were proportional to sleep duration. Like diazepam (a GABA_A–benzodiazepine (BZD) receptor agonist), the hypnotic effects of GRPE, GOPE, and their EA fractions were fully inhibited by flumazenil (a GABA_A–BZD receptor antagonist). These results suggest that potentiation effects of GRPE and GOPE on pentobarbital-induced sleep in mice may be modulated by a GABAergic mechanism.     

Dreamware: edutainment system for children with developmental disability

We designed and implemented an edutainment platform, Dreamware. It effectively helps education, sensibility treatment and intelligence training for children with developmental disability. We developed special toy-like hardware and software tools: a content authoring tool that makes a variety of multimedia content operating on the hardware, a management tool that provides training results to instructors, and a real-time monitoring tool to observe the current state of learning. The hardware is designed to consider the characteristics of children with developmental disability. It can provide sensibility training, such as visual, auditory, and tactile senses to them. The easy-to-use authoring tool enables teachers and non-specialists to make educational content conveniently. In addition, the real-time monitoring tool helps observe the user’s status, even outside the classroom. The management tool stores training results and provides the result for further steps. Efficient repetitive training is possible without restriction of time and location using this platform. We can recognize that our system is effective in improving their concentration and learning.     

Characterizing Overlay Multicast Networks and Their Costs

Overlay networks among cooperating hosts have recently emerged as a viable solution to several challenging problems, including multicasting, routing, content distribution, and peer-to-peer services. Application-level overlays, however, incur a performance penalty over router-level solutions. This paper quantifies and explains this performance penalty for overlay multicast trees via: 1) Internet experimental data; 2) simulations; and 3) theoretical models. We compare a number of overlay multicast protocols with respect to overlay tree structure, and underlying network characteristics. Experimental data and simulations illustrate that the mean number of hops and mean per-hop delay between parent and child hosts in overlay trees generally decrease as the level of the host in the overlay tree increases. Overlay multicast routing strategies, overlay host distribution, and Internet topology characteristics are identified as three primary causes of the observed phenomenon. We show that this phenomenon yields overlay tree cost savings: Our results reveal that the normalized cost L(n)/U(n) is propn^0.9 for small n, where L(n) is the total number of hops in all overlay links, U(n) is the average number of hops on the source to receiver unicast paths, and n is the number of members in the overlay multicast session. This can be compared to an IP multicast cost proportional to n^0.6 to n^0.8     

Water-soluble binder with high flexural modulus for powder injection molding

A new binder system, containing ternary polymer blends of poly(methyl methacrylate) (PMMA), cellulose acetate butyrate (CAB) and polyethylene glycol (PEG), was introduced for the powder injection molding of stainless steel powders. The weight fraction of PEG in the binder was maintained to be 0.65. When the weight fraction of PMMA in the binder was 0.1–0.25 (thus the weight fraction of CAB was 0.1–0.25), the feedstocks with 56 vol% of steel powders were successfully injection molded without showing any jetting. Furthermore, the feedstocks have much higher flexural modulus compared with those prepared by a binder consisting only 35/65 (wt/wt) CAB/PEG blend. Three binary blends, PMMA/CAB, PMMA/PEG, and CAB/PEG, were completely miscible at an injection molding temperature of 130^°C. The extraction process employed in this study becomes environmentally favorable due to the major component (PEG) of the binder which is easily extracted by a solvent of water or ethanol. Also, the shape maintenance during the solvent extraction was excellent, and final sintered parts had excellent dimensional stability. Due to high flexural modulus of feedstocks, this binder system can be employed for preparing large sized injection-mold articles.     

Data retention characteristics of MANOS-type flash memory device with different metal gates at various levels of charge injection

We investigated the impact of charge injection and metal gates (Al and Pt) on the data retention characteristics of metal–alumina–nitride–oxide–silicon (MANOS) devices for NAND flash memory application. Through the theoretical and experimental results, the highly injected charge (ΔV_TH) could cause the band bending of Al₂O₃, which reduced the tunneling distance across Al₂O₃. Thus, the dominant charge loss path is not only toward SiO₂ but also toward Al₂O₃ direction. Compared to low-metal work function (Ф_M), ONA stack with high-Ф_M showed better data retention characteristics, even if ΔV_TH is high. This could be explained by Fermi level alignment for different Ф_M, which results in the reduction of electric field across the Al₂O₃ compensated by the ΔФ_M (Ф_Pt ? Ф_Al).     

AB9: A neural processor for inference acceleration

We present AB9, a neural processor for inference acceleration. AB9 consists of a systolic tensor core (STC) neural network accelerator designed to accelerate artificial intelligence applications by exploiting the data reuse and parallelism characteristics inherent in neural networks while providing fast access to large on‐chip memory. Complementing the hardware is an intuitive and user‐friendly development environment that includes a simulator and an implementation flow that provides a high degree of programmability with a short development time. Along with a 40‐TFLOP STC that includes 32k arithmetic units and over 36 MB of on‐chip SRAM, our baseline implementation of AB9 consists of a 1‐GHz quad‐core setup with other various industry‐standard peripheral intellectual properties. The acceleration performance and power efficiency were evaluated using YOLOv2, and the results show that AB9 has superior performance and power efficiency to that of a general‐purpose graphics processing unit implementation. AB9 has been taped out in the TSMC 28‐nm process with a chip size of 17 × 23 mm². Delivery is expected later this year.